Design and R & D capabilities
With the improvement of people's quality of life, people put forward higher requirements on furniture supplies, comfort, environmental
protection, novelty, especially mattresses. The idea of comfortable and healthy sleep dream requires the technical content mattress is
elevated to a new level, which also provides value-added space for mattress products. In addition, to meet the preferences of different
groups of people, it is necessary to enrich the variety of furniture products and accelerate the speed of product innovation for mattress
factory, this furniture enterprises with superb design techniques. Require huge capital investments and the rich experience accumulated, R &
D and design capabilities enhanced enterprise only has sufficient funds, reserve a lot of talent on the basis of progress has been made in
the furniture industry.
Brand awareness of mattress
Human spend one-third of the time in bed. In recent years, with the promotion of scientific knowledge, healthy sleep concept is deeply rooted
among the consumers and we pay more value to the furniture product quality and environmental performance. While in the context of products
serious homogenization, the brand will undoubtedly become the most intuitive orientation of furniture products. However, the establishment of
the brand requires a long period of accumulation and investment, and the durables characteristics of furniture decides this process slower
and longer, which is precisely the opportunity for the mattress manufacturer has a brand advantage.
Channel building capacity of mattress companies
Sales channels are not only the terminal for the furniture enterprises to realize the profits, but also the platform to convey product
information directly to consumers. By taking advantage of marketing network, enterprises can launch its own product through the marketing
network, to seize market opportunities; the product will be at a disadvantage in the competition in the market without perfect marketing
network. Establish a nationwide sales network and implement effective management is the key to the long-term survival of the furniture
companies. Furniture terminals concentrate in large home stores, the shop area is large, decoration requirements are high and difficult to
obtain; and it takes a big investment to build self-outlets, and the cost of follow-up management is high; there is uncertainty on the
control for the development of the franchisee, which is formed a higher threshold for market access.
Management capacity of mattress enterprises
Capacity and sophistication of enterprise management determines the efficiency of business operations and cost which plays great significance
to enhance the competitiveness of enterprises and operating efficiency. It needs long time to accumulate at the aspect of network marketing,
research and development, procurement, production management capabilities, and it is a barrier for the new entrants to participate in the
competition and enhance the management ability.
The ability to control costs of mattress enterprises
At present, the profit level of the furniture companies increasingly average, only the enterprises with better ability to control costs, the
advantage of scale in order to survive in the fierce competition.
www.thespringmattress.com
With 4 factories and daily production capacity of 3,000pcs, Eurasia distributes our premium quality mattresses worldwide. Having more than
1,000 employees and 2 overseas branch offices in Korea and Australia, Eurasia is expanding in terms of sales volume, market share and brand
recognition. Being proud of our experienced designing team, Eurasia processes world leading ideas to bring better sleeps to customers.
Sunday, March 31, 2013
LED Light Fixtures Thermal Conductivity don't need Metal but Plastic
Advantage of rapid development of the LED industry
LED has gained wide recognition and favor by virtue of the small size, low power consumption, long life, high brightness, low in calories, high environmental protection, durable advantages. In just a few years, LED light fixtures have widely replaced traditional lighting accessories, especially in the automotive, electronics, medical and other cutting-edge industries and fields. The rapid development of the LED industry greatly boosts the development of the upstream material industry, and further promotes breakthroughs in the field of high-end materials.
The thermally conductive plastic is developed
LED light fixtures use a large number of plastic parts, including the packaging element of the LED chip, LED optical lens, the light scattering element, efficient heat dissipation member, the light reflecting and light diffusing plate. Though
are energy-efficient and have smaller amount of heat, but the pros and cons of the thermal performance of the thermal conductivity components are critical for LED lamp life and energy efficiency. Thus, researchers use thermal conductive filler to uniformly fill with the polymer matrix material, in order to improve its thermal performance, and developed the thermally conductive plastic that can effectively transfer heat.
Thermally conductive plastic advantages
Thermally conductive plastics are increasingly replacing the metal parts to be used as thermal conductivity parts of flexible led strip lights, including lamp holders, cooling, heat lamp cup and shell. Compared to traditional metal materials, thermally conductive plastic has many advantages, which are the following four points: Firstly, even heat dissipation and avoid burning point, reduce local deformation of parts caused by high temperature. Secondly, light weight; it is 40-50% lighter than aluminum. Thirdly, convenient forming and no need for secondary processing. Fourthly, the product design has a high degree of freedom.
Thermal conductivity plastics will have very good prospects for the application and space for development People now maintain a high degree of attention to carbon dioxide emissions, and gradually increase the awareness of energy saving and environmental protection, and the birth of the LED technology helps people achieve the goal of sustainable development. Using thermal conductivity plastic to take instead of metal is able to increase the flexibility of the lighting design, reducing the total weight of lamps. In addition, the application of conductive plastic can effectively improve lighting efficiency, saving power consumption. With more attention given by the government departments, making efforts to increase technological innovation and investment in the area of special materials, LED materials, especially the thermal conductivity plastics will have very good prospects for the application and space for development.
www.ledlightmx.com is a high-tech lighting enterprise deal in develop, produce and sales. Our LED diodes, such as DIP LED, High power LED, COB LED. are widely applied in lighting, backlight, indoor and outdoor display screen, etc. If you are interested in our products, please feel free to contact us!
LED has gained wide recognition and favor by virtue of the small size, low power consumption, long life, high brightness, low in calories, high environmental protection, durable advantages. In just a few years, LED light fixtures have widely replaced traditional lighting accessories, especially in the automotive, electronics, medical and other cutting-edge industries and fields. The rapid development of the LED industry greatly boosts the development of the upstream material industry, and further promotes breakthroughs in the field of high-end materials.
The thermally conductive plastic is developed
LED light fixtures use a large number of plastic parts, including the packaging element of the LED chip, LED optical lens, the light scattering element, efficient heat dissipation member, the light reflecting and light diffusing plate. Though
are energy-efficient and have smaller amount of heat, but the pros and cons of the thermal performance of the thermal conductivity components are critical for LED lamp life and energy efficiency. Thus, researchers use thermal conductive filler to uniformly fill with the polymer matrix material, in order to improve its thermal performance, and developed the thermally conductive plastic that can effectively transfer heat.
Thermally conductive plastic advantages
Thermally conductive plastics are increasingly replacing the metal parts to be used as thermal conductivity parts of flexible led strip lights, including lamp holders, cooling, heat lamp cup and shell. Compared to traditional metal materials, thermally conductive plastic has many advantages, which are the following four points: Firstly, even heat dissipation and avoid burning point, reduce local deformation of parts caused by high temperature. Secondly, light weight; it is 40-50% lighter than aluminum. Thirdly, convenient forming and no need for secondary processing. Fourthly, the product design has a high degree of freedom.
Thermal conductivity plastics will have very good prospects for the application and space for development People now maintain a high degree of attention to carbon dioxide emissions, and gradually increase the awareness of energy saving and environmental protection, and the birth of the LED technology helps people achieve the goal of sustainable development. Using thermal conductivity plastic to take instead of metal is able to increase the flexibility of the lighting design, reducing the total weight of lamps. In addition, the application of conductive plastic can effectively improve lighting efficiency, saving power consumption. With more attention given by the government departments, making efforts to increase technological innovation and investment in the area of special materials, LED materials, especially the thermal conductivity plastics will have very good prospects for the application and space for development.
www.ledlightmx.com is a high-tech lighting enterprise deal in develop, produce and sales. Our LED diodes, such as DIP LED, High power LED, COB LED. are widely applied in lighting, backlight, indoor and outdoor display screen, etc. If you are interested in our products, please feel free to contact us!
Sunday, March 24, 2013
Basic Introduction about LED Spot Lights
1. LED Spotlights basic definitions
LED spot light is also called projection light, spotlight, floodlight, etc. which is mainly used for architectural decoration lighting purposes (not yet reached functional lighting purposes), its appearance is available for round and square, because generally we have to consider the reasons of heat dissipation, therefore the appearance of led spot lighting still has some differences with the traditional spotlights.
2. LED Spotlights basic parameters
Currently the commonly used LED spotlights on the market basically use 1W high power LED tube (each LED tube has a high optical efficiency lens made of PMMA, whose main function is secondary distribution of the light emitted by the LED tube), few companies choose 3W or higher power LED tube because cooling technologies are handled well. There are 1W, 3W, 8W, 12W, 18W and 36W power forms, because all have to take cooling factor into account, therefore each high-power LED spot light will be equipped with a cooling device (aluminum is commonly used). The size of the heat sink depends on the size of the LED tube power, which more or less brings a little inconvenience to the LED spotlights shape design. Throughout the industry, affected by the price, light efficiency and universal recognition and many other factors, the application of high-power e27 led spot light is not very wide, but this situation is slowly changing, and there are a lot of engineering in the country has applied high-power LED spotlights.
3. LED spot light control form
LED spotlights have external control and internal control two control modes; the internal control doesn't need external controller, can be built-in with many change modes (up to six), and the outer control will have to configure external control controller before color change. The majority applications on the market are external control.
4. Main applications and the effect can be achieved
LED spotlights can be used without controller in minor works applications through the control of built-in microchip, to achieve a gradual transition, color flashing, random flashing, alternating gradient dynamic effects, which can also achieve scan results by DMX control chase. Currently, the main application areas are: single building, historical buildings exterior lighting, the building "inner light penetrating outside" lighting , indoor local lighting; greening landscape lighting, billboard; medical, cultural, and other specialized facilities lighting; bars, discos, etc. entertainment atmosphere, lighting, etc. As LED technology continues to evolve, it is believed that it will replace the traditional spotlights one day.
www.progressive-hk.com is a high-tech company giving priority to environmental protection, energy saving and carbon reduction. The company joins hands with Hong Kong ASTRI to develop efficient LED products in oudoor lighting project, to provide the society with more energy-saved and environmental protection products.
LED spot light is also called projection light, spotlight, floodlight, etc. which is mainly used for architectural decoration lighting purposes (not yet reached functional lighting purposes), its appearance is available for round and square, because generally we have to consider the reasons of heat dissipation, therefore the appearance of led spot lighting still has some differences with the traditional spotlights.
2. LED Spotlights basic parameters
Currently the commonly used LED spotlights on the market basically use 1W high power LED tube (each LED tube has a high optical efficiency lens made of PMMA, whose main function is secondary distribution of the light emitted by the LED tube), few companies choose 3W or higher power LED tube because cooling technologies are handled well. There are 1W, 3W, 8W, 12W, 18W and 36W power forms, because all have to take cooling factor into account, therefore each high-power LED spot light will be equipped with a cooling device (aluminum is commonly used). The size of the heat sink depends on the size of the LED tube power, which more or less brings a little inconvenience to the LED spotlights shape design. Throughout the industry, affected by the price, light efficiency and universal recognition and many other factors, the application of high-power e27 led spot light is not very wide, but this situation is slowly changing, and there are a lot of engineering in the country has applied high-power LED spotlights.
3. LED spot light control form
LED spotlights have external control and internal control two control modes; the internal control doesn't need external controller, can be built-in with many change modes (up to six), and the outer control will have to configure external control controller before color change. The majority applications on the market are external control.
4. Main applications and the effect can be achieved
LED spotlights can be used without controller in minor works applications through the control of built-in microchip, to achieve a gradual transition, color flashing, random flashing, alternating gradient dynamic effects, which can also achieve scan results by DMX control chase. Currently, the main application areas are: single building, historical buildings exterior lighting, the building "inner light penetrating outside" lighting , indoor local lighting; greening landscape lighting, billboard; medical, cultural, and other specialized facilities lighting; bars, discos, etc. entertainment atmosphere, lighting, etc. As LED technology continues to evolve, it is believed that it will replace the traditional spotlights one day.
www.progressive-hk.com is a high-tech company giving priority to environmental protection, energy saving and carbon reduction. The company joins hands with Hong Kong ASTRI to develop efficient LED products in oudoor lighting project, to provide the society with more energy-saved and environmental protection products.
Chinese LED Market Becomes More Rational
LED Financial Subsidies Promote LED Declining
Due to the double incentives of policy efforts and the huge market, China LED market dynamic has been the industry focus. Chinese official released before the annual semiconductor lighting products financial subsidies to promote the project has been officially opening. The results of the bidding, the agency Trend Force's research department of the global market research think that LED inside the finalists is a significant reduction in costs and prices, the Chinese LED lighting industry mainstream standards have been raised, lighting the advent of the sweet point, future foreign investors in China market face competition in the local Chinese manufacturers, which has been inevitable. Seen from quotation, street lamps of outdoor lighting and outdoor led landscape lighting, the average cost per watt has reached about 11 RMB, compared with the general 15-18 RMB / W market price have reduced significantly. The bid opening price is significantly lower than the market price is a manifestation of the effectiveness of direct financial subsidies. Indoor lighting costs are pulled down to 7 RMB / W standards, this value is close to the critical point start LED inside forecasts indoor lighting market, under the financial subsidies promotion, the consumer to bear the price will further decline to 5 / W, is expected to be relatively ideal market acceptance.
LED Lights Reflect the Cost of Power
As for offer, since the tender sets up a lot of restrictions, such as requirements to be included in the module and interface versatility scoring factors to reduce product complexity, while the establishment of a minimum annual production requirements, to ensure the high productivity of the bid opening businesses, therefore as for the shortlisted companies, the offer is relatively much to be rational, LED inside said that under the new bidding rules, party lighting design standards of quality and optical efficiency has higher degree of homogeneity, so the power is the main factor to affect offer. In luminous efficiency, to be able to monitor the luminous flux of the street lamps and outdoor led light bulbs, for example, the successful vendors also reflect the high design standards. As for the average light efficiency, lighting efficiency of many manufacturers has reached more than 100 lumens per watt.
The Level of LED Lamps Efficiency Rises
LED inside thinks that the successful vendor is expected to further open markets, through financial subsidies enhance seepage through the terminal market penetration for LED industry to open more to the overseas market, to ease the current industry overcapacity problem. Chinese manufacturers have the opportunity through better value for money, boost sales and to get a larger share of the subsidy, and promote the rapid development of the upstream industry chain in China.
www.progressive-hk.com is a high-tech company giving priority to environmental protection, energy saving and carbon reduction. The company joins hands with Hong Kong ASTRI to develop efficient LED products in outdoor lighting project, to provide the society with more energy-saving and environmental protection products. Welcome to have a visit to our page!
Due to the double incentives of policy efforts and the huge market, China LED market dynamic has been the industry focus. Chinese official released before the annual semiconductor lighting products financial subsidies to promote the project has been officially opening. The results of the bidding, the agency Trend Force's research department of the global market research think that LED inside the finalists is a significant reduction in costs and prices, the Chinese LED lighting industry mainstream standards have been raised, lighting the advent of the sweet point, future foreign investors in China market face competition in the local Chinese manufacturers, which has been inevitable. Seen from quotation, street lamps of outdoor lighting and outdoor led landscape lighting, the average cost per watt has reached about 11 RMB, compared with the general 15-18 RMB / W market price have reduced significantly. The bid opening price is significantly lower than the market price is a manifestation of the effectiveness of direct financial subsidies. Indoor lighting costs are pulled down to 7 RMB / W standards, this value is close to the critical point start LED inside forecasts indoor lighting market, under the financial subsidies promotion, the consumer to bear the price will further decline to 5 / W, is expected to be relatively ideal market acceptance.
LED Lights Reflect the Cost of Power
As for offer, since the tender sets up a lot of restrictions, such as requirements to be included in the module and interface versatility scoring factors to reduce product complexity, while the establishment of a minimum annual production requirements, to ensure the high productivity of the bid opening businesses, therefore as for the shortlisted companies, the offer is relatively much to be rational, LED inside said that under the new bidding rules, party lighting design standards of quality and optical efficiency has higher degree of homogeneity, so the power is the main factor to affect offer. In luminous efficiency, to be able to monitor the luminous flux of the street lamps and outdoor led light bulbs, for example, the successful vendors also reflect the high design standards. As for the average light efficiency, lighting efficiency of many manufacturers has reached more than 100 lumens per watt.
The Level of LED Lamps Efficiency Rises
LED inside thinks that the successful vendor is expected to further open markets, through financial subsidies enhance seepage through the terminal market penetration for LED industry to open more to the overseas market, to ease the current industry overcapacity problem. Chinese manufacturers have the opportunity through better value for money, boost sales and to get a larger share of the subsidy, and promote the rapid development of the upstream industry chain in China.
www.progressive-hk.com is a high-tech company giving priority to environmental protection, energy saving and carbon reduction. The company joins hands with Hong Kong ASTRI to develop efficient LED products in outdoor lighting project, to provide the society with more energy-saving and environmental protection products. Welcome to have a visit to our page!
Tuesday, March 19, 2013
Judge the Development of LED Industry through Canton Fair
Led commercial lighting sweeps the lighting industry
LED industry will focus on it development in the lighting industry, which means that the lighting will be an important area for the future development of LED. When it comes to lighting industry, we have to mention LED light bulbs for home; and when it comes to commercial lighting, LED lighting distributes everywhere. It attracts much controversy. However, regardless of external public opinion, the development of LED lighting is still high-speed forward. We have to admit, LED lighting has become a trend of the future development of the industry. With the lightning speed, it sweeps the entire lighting industry.
Status quo of commercial LED industry
Currently, LED commercial lighting product has entered a stable stage of development. From the technical level, the LED has obvious advantages for the use in the field of commercial lighting, these advantages include energy saving, long life, instant start and high color. The traditional commercial lights include incandescent, halogen, fluorescent lamps, energy-saving lamps and metal halide. G24 light bulb can be a good alternative to incandescent lamps, halogen lamps, and energy saving is up to 90% or more, and its life is 50 times of these traditional lamps. The luminous efficiency of energy-efficient lamp in Traditional lamps is 50-60lm / W while LED light efficiency can reach 100lm / W, and the utilization efficiency of the LED lamps is higher than the energy-saving lamps, energy saving is up to 60%. Admittedly, the development of LED commercial lighting brings the opportunities and challenges to many LED business. In order to keep the steady development of enterprises, product quality must be guaranteed. In addition, lighting design and power control system is also very critical for LED lighting manufacturers. We are optimistic about the Led commercial lighting market, and commercial lighting LED lighting plays an exemplary role.
Factors for the improvement of LED commercial lighting
For a commercial place, atmosphere is very important, and lighting can create huge profits for the business. In the future, LED alternative to traditional lamps in the commercial space will be more and more mature, and the stability of the LED products will be further improved. And the key factor to promote the LED lighting industry is the price. Particularly in civilian areas, we are more sensitive to the price factor. Therefore, the high quality and cheap LED lamps in the future will be the key for the enterprise to promote the development of LED commercial lighting market. Lighting market is a long-term market, and we have to think about how to develop their own in a market. After many twists and turns, commercial lighting is facing new possibilities. We also expect that enterprises can develop orderly to boost the LED commercial lighting into the golden period of development.
www.fytled.com FYT LED specializes in manufacturing and exporting LED spot light (GU10, MR16, PAR, AR111), LED tube, LED panel light, LED bulbs, LED Downlight.We have exported to more than 50 countries such as USA, UK, Spain, Holland, Belgium, Germany, Italy, South Africa, Austrlia, Brazil etc.
LED industry will focus on it development in the lighting industry, which means that the lighting will be an important area for the future development of LED. When it comes to lighting industry, we have to mention LED light bulbs for home; and when it comes to commercial lighting, LED lighting distributes everywhere. It attracts much controversy. However, regardless of external public opinion, the development of LED lighting is still high-speed forward. We have to admit, LED lighting has become a trend of the future development of the industry. With the lightning speed, it sweeps the entire lighting industry.
Status quo of commercial LED industry
Currently, LED commercial lighting product has entered a stable stage of development. From the technical level, the LED has obvious advantages for the use in the field of commercial lighting, these advantages include energy saving, long life, instant start and high color. The traditional commercial lights include incandescent, halogen, fluorescent lamps, energy-saving lamps and metal halide. G24 light bulb can be a good alternative to incandescent lamps, halogen lamps, and energy saving is up to 90% or more, and its life is 50 times of these traditional lamps. The luminous efficiency of energy-efficient lamp in Traditional lamps is 50-60lm / W while LED light efficiency can reach 100lm / W, and the utilization efficiency of the LED lamps is higher than the energy-saving lamps, energy saving is up to 60%. Admittedly, the development of LED commercial lighting brings the opportunities and challenges to many LED business. In order to keep the steady development of enterprises, product quality must be guaranteed. In addition, lighting design and power control system is also very critical for LED lighting manufacturers. We are optimistic about the Led commercial lighting market, and commercial lighting LED lighting plays an exemplary role.
Factors for the improvement of LED commercial lighting
For a commercial place, atmosphere is very important, and lighting can create huge profits for the business. In the future, LED alternative to traditional lamps in the commercial space will be more and more mature, and the stability of the LED products will be further improved. And the key factor to promote the LED lighting industry is the price. Particularly in civilian areas, we are more sensitive to the price factor. Therefore, the high quality and cheap LED lamps in the future will be the key for the enterprise to promote the development of LED commercial lighting market. Lighting market is a long-term market, and we have to think about how to develop their own in a market. After many twists and turns, commercial lighting is facing new possibilities. We also expect that enterprises can develop orderly to boost the LED commercial lighting into the golden period of development.
www.fytled.com FYT LED specializes in manufacturing and exporting LED spot light (GU10, MR16, PAR, AR111), LED tube, LED panel light, LED bulbs, LED Downlight.We have exported to more than 50 countries such as USA, UK, Spain, Holland, Belgium, Germany, Italy, South Africa, Austrlia, Brazil etc.
Sunday, March 17, 2013
Common Sense for Buying LED Tube Lights
LED tube lights are more and more widely used
LED is rapidly moving toward the market because its light-emitting principle is better than the traditional incandescent and fluorescent lamps, energy-saving, environmental protection and health, especially led tubes China, increases at an annual of 40%, going to the shopping malls, schools, hospitals and factories. The schools and hospitals in individual districts almost popularized LED tube lights. Now we will introduce the notes for the purchase of LED led tube lighting as follows:
1. Choose the right color temperature. LED fluorescent installation location is high, you can buy the high color temperature, such as: 6500K - 7000K. Light color seems a bit bluish. As LED light efficiency is relatively high, despite a bit harsh, because it is installed high, the chance to direct exposure to the eye is very small. If the installation location is low, there will be more opportunities to direct expose to the eyes, then you should choose the low color temperature, which is close to daylight, such as color temperature: 5500K - 6000K. As the light is softer, eyes feel comfortable.
2. The selection of LED light tubes also needs to consider the appropriate power. The LED tube with the same energy consumption is different in its luminous flux. Select high-quality, large luminous flux LED led tube lighting to replace the traditional fluorescent lamp can consider installing less. Do not substitute 1:1 with the traditional fluorescent.
will be more energy-efficient. In order to save energy and protect the health of workers, the production workshop of a company in Dongguan first install high-quality 18W LED fluorescent light in the workshop produced by our company, which is brighter than the original brand fluorescent energy saving lamp 40W, and finally the effect difference with the original two traditional fluorescent is small.
3. Choose the right appearance: the general LED fluorescent is still stuck in the traditional fluorescent stage in the concept of users. So, no matter what the situation is, it requires the light to be the same with traditional fluorescent. The led tube light manufacturers add soft board in the LED tube, making the light looks like the same as traditional fluorescent. In fact, the soft plate has loss to light energy, which is generally between 15- 30%. If the installation location is higher, eyes are not easy to be often irradiated, then you can consider a transparent cover, otherwise selecting low power small LED fluorescent light will be more energy efficient.
4. Choose the right type of fluorescent tubes. Fluorescent lights use low power SMD lamp beads, the overall calorific is not too much. But if there is better heat dissipation, the light fades will be further reduced and the life expectancy will be increased. The LED fluorescent appearance is large, the radiator area is much larger and heat dissipation is much. If possible, try to use T8 \ T10 tubes. Of course, T10 tube shape is larger and its cost is also high, based on experience, T8 tube is the most appropriate. T4 \ T5 are smaller. Especially T4 tube, you cannot choose large high power. Select appropriate led tube according to the specific workplace.
www.ervan.cn is one of the top 10 LED Tube manufacturers. We set up on the firm belief of offering the high quality, unique design and fully warranted LED tubes to our customer at the most competitive price.
If you are interested in our products, please feel free to contact us!
LED is rapidly moving toward the market because its light-emitting principle is better than the traditional incandescent and fluorescent lamps, energy-saving, environmental protection and health, especially led tubes China, increases at an annual of 40%, going to the shopping malls, schools, hospitals and factories. The schools and hospitals in individual districts almost popularized LED tube lights. Now we will introduce the notes for the purchase of LED led tube lighting as follows:
1. Choose the right color temperature. LED fluorescent installation location is high, you can buy the high color temperature, such as: 6500K - 7000K. Light color seems a bit bluish. As LED light efficiency is relatively high, despite a bit harsh, because it is installed high, the chance to direct exposure to the eye is very small. If the installation location is low, there will be more opportunities to direct expose to the eyes, then you should choose the low color temperature, which is close to daylight, such as color temperature: 5500K - 6000K. As the light is softer, eyes feel comfortable.
2. The selection of LED light tubes also needs to consider the appropriate power. The LED tube with the same energy consumption is different in its luminous flux. Select high-quality, large luminous flux LED led tube lighting to replace the traditional fluorescent lamp can consider installing less. Do not substitute 1:1 with the traditional fluorescent.
will be more energy-efficient. In order to save energy and protect the health of workers, the production workshop of a company in Dongguan first install high-quality 18W LED fluorescent light in the workshop produced by our company, which is brighter than the original brand fluorescent energy saving lamp 40W, and finally the effect difference with the original two traditional fluorescent is small.
3. Choose the right appearance: the general LED fluorescent is still stuck in the traditional fluorescent stage in the concept of users. So, no matter what the situation is, it requires the light to be the same with traditional fluorescent. The led tube light manufacturers add soft board in the LED tube, making the light looks like the same as traditional fluorescent. In fact, the soft plate has loss to light energy, which is generally between 15- 30%. If the installation location is higher, eyes are not easy to be often irradiated, then you can consider a transparent cover, otherwise selecting low power small LED fluorescent light will be more energy efficient.
4. Choose the right type of fluorescent tubes. Fluorescent lights use low power SMD lamp beads, the overall calorific is not too much. But if there is better heat dissipation, the light fades will be further reduced and the life expectancy will be increased. The LED fluorescent appearance is large, the radiator area is much larger and heat dissipation is much. If possible, try to use T8 \ T10 tubes. Of course, T10 tube shape is larger and its cost is also high, based on experience, T8 tube is the most appropriate. T4 \ T5 are smaller. Especially T4 tube, you cannot choose large high power. Select appropriate led tube according to the specific workplace.
www.ervan.cn is one of the top 10 LED Tube manufacturers. We set up on the firm belief of offering the high quality, unique design and fully warranted LED tubes to our customer at the most competitive price.
If you are interested in our products, please feel free to contact us!
Friday, March 15, 2013
Chinese 20W LED T8 Lamp went into $50 After-Era
LED bulb is not popular in LED market in China
Unlike Japan, South Korea and other Southeast Asian market performance, the LED bulb is not popular in LED market in China. Compared to traditional lighting, LED bulb has strong substitutability, but the cities in China are not the home of the LED bulb market; the rural market which large uses bulb has no starting amount due to the high price of LED bulb and not high awareness confusing.
Situation of Chinese civil LED lighting market
Insiders said that the starting point of the Chinese civil LED lighting market is the city, the LED lamp which has a strong substitutability like LED bulb will be the force product in civil lighting market. Why is led tube lamp unable to enter millions of households? LED inside think that there are three main reasons: firstly, because the price is too high; secondly, the lack of government support and promotion effort is not strong enough; thirdly, policy majority only shouts slogans but not being implemented. The market and consumers cannot accept LED tube expensive price and performance is the main reason why the market has not broken the ice barrier. Actually an ordinary energy- saving fluorescent lamp price is just more than 10 RMB, while an LED fluorescent tube sells 100 RMB. Experts believe that if the cost of the light source is dropped to 10 RMB, wide voltage 20W LED T8 cost is about 42 RMB, the Chinese mainland market can use single voltage drive power, then the power part of the cost can come down, if large quantities production, single voltage 20W LED T8 lamps cost is about 30 RMB.
Two conditions to lower down LED lighting costs
LED insides observed that the cost control for LED lighting products is the most important issue faced by many enterprises. Rectangular lighting Linsen, Chau Ming Neo-Neon LED business launched low-cost LED products to respond to the Chinese market. Chau Ming Lin Ming-feng, general manager, pointed out at Guangzhou Guangya Exhibition this year, LED lighting costs can lower down, but need the support of two conditions. First, the LED should form industry standards; secondly, the amount of production.
The future cost of LED lighting source will be very cheap
The industry experts analyzed that with the LED upstream inputs and technological breakthroughs of Chinese local enterprises, the future cost of LED lighting source can reach a few cents per watt, which is almost negligible in lighting costs. It can be inferred that the cost control of single voltage 20W led t8 tube light used in the China market in less than 30 RMB can be achieved. Experts believe that if the low price 50 RMB 20W LED T8 lamp LED appears in civilian lighting market, the civil lighting market in China will appear subversive sexual revolution, then the traditional T8 tubes sold by the international companies in the Chinese market may have serious market squeeze.
www.ervan.cn is a professional LED tube manufacturer located in Shenzhen, China. We set up on the firm belief of offering the high quality, unique design and fully warranted LED tubes to our customer at the most competitive price. If you are interested in our products, please feel free to contact us!
Selecting Modern Kitchen Cabinets
There are countless corporate that produce LED tubes on the market, but the product quality and performance are very different, which makes the foreign trade enterprises who do not understand the line, energy companies, engineering firms, foreign-funded enterprises Procurement Office in China and other non-professionals do not know how to distinguish the quality and performance of China led tube in the procurement process. If you do not know when purchasing products, you may spend the ideal price but don’t buy their ideal product. You can purchase LED tubes from the following aspects: profiles, power and chip...
The Development of LED Display in China
CREE has a plan to shift the focus to the Chinese LED industry, the company in 2010 to about $167000000 in investment the majority will use in china. China and Asia LED market growth, is the foreign enterprise growth to gain maximum power. In fiscal 2010, CREE Asia market revenue accounts for its total revenue of about 2/3, the Chinese mainland and Hong Kong area's revenue growth up to 100%...
Unlike Japan, South Korea and other Southeast Asian market performance, the LED bulb is not popular in LED market in China. Compared to traditional lighting, LED bulb has strong substitutability, but the cities in China are not the home of the LED bulb market; the rural market which large uses bulb has no starting amount due to the high price of LED bulb and not high awareness confusing.
Situation of Chinese civil LED lighting market
Insiders said that the starting point of the Chinese civil LED lighting market is the city, the LED lamp which has a strong substitutability like LED bulb will be the force product in civil lighting market. Why is led tube lamp unable to enter millions of households? LED inside think that there are three main reasons: firstly, because the price is too high; secondly, the lack of government support and promotion effort is not strong enough; thirdly, policy majority only shouts slogans but not being implemented. The market and consumers cannot accept LED tube expensive price and performance is the main reason why the market has not broken the ice barrier. Actually an ordinary energy- saving fluorescent lamp price is just more than 10 RMB, while an LED fluorescent tube sells 100 RMB. Experts believe that if the cost of the light source is dropped to 10 RMB, wide voltage 20W LED T8 cost is about 42 RMB, the Chinese mainland market can use single voltage drive power, then the power part of the cost can come down, if large quantities production, single voltage 20W LED T8 lamps cost is about 30 RMB.
Two conditions to lower down LED lighting costs
LED insides observed that the cost control for LED lighting products is the most important issue faced by many enterprises. Rectangular lighting Linsen, Chau Ming Neo-Neon LED business launched low-cost LED products to respond to the Chinese market. Chau Ming Lin Ming-feng, general manager, pointed out at Guangzhou Guangya Exhibition this year, LED lighting costs can lower down, but need the support of two conditions. First, the LED should form industry standards; secondly, the amount of production.
The future cost of LED lighting source will be very cheap
The industry experts analyzed that with the LED upstream inputs and technological breakthroughs of Chinese local enterprises, the future cost of LED lighting source can reach a few cents per watt, which is almost negligible in lighting costs. It can be inferred that the cost control of single voltage 20W led t8 tube light used in the China market in less than 30 RMB can be achieved. Experts believe that if the low price 50 RMB 20W LED T8 lamp LED appears in civilian lighting market, the civil lighting market in China will appear subversive sexual revolution, then the traditional T8 tubes sold by the international companies in the Chinese market may have serious market squeeze.
www.ervan.cn is a professional LED tube manufacturer located in Shenzhen, China. We set up on the firm belief of offering the high quality, unique design and fully warranted LED tubes to our customer at the most competitive price. If you are interested in our products, please feel free to contact us!
related post
Selecting Modern Kitchen Cabinets
There are countless corporate that produce LED tubes on the market, but the product quality and performance are very different, which makes the foreign trade enterprises who do not understand the line, energy companies, engineering firms, foreign-funded enterprises Procurement Office in China and other non-professionals do not know how to distinguish the quality and performance of China led tube in the procurement process. If you do not know when purchasing products, you may spend the ideal price but don’t buy their ideal product. You can purchase LED tubes from the following aspects: profiles, power and chip...
The Development of LED Display in China
CREE has a plan to shift the focus to the Chinese LED industry, the company in 2010 to about $167000000 in investment the majority will use in china. China and Asia LED market growth, is the foreign enterprise growth to gain maximum power. In fiscal 2010, CREE Asia market revenue accounts for its total revenue of about 2/3, the Chinese mainland and Hong Kong area's revenue growth up to 100%...
How to Choose Right LED Tube and Standards?
Purchase LED tubes from three aspects
There are countless corporate that produce LED tubes on the market, but the product quality and performance are very different, which makes the foreign trade enterprises who do not understand the line, energy companies, engineering firms, foreign-funded enterprises Procurement Office in China and other non-professionals do not know how to distinguish the quality and performance of China led tube in the procurement process. If you do not know when purchasing products, you may spend the ideal price but don’t buy their ideal product. You can purchase LED tubes from the following aspects: profiles, power and chip.
1. Profiles, structure
Now there are basically two kinds of profiles on the market: all-plastic, half plastic half-tubes. 1) All-plastic lamp: early LED tubes used all-plastic tube, because they mainly use the non-isolated power, in order to avoid the risk of electric shock problem, people hope to use all-plastic lamp. The biggest problem of this fluorescent lamp is the cooling problem, because the heat is sealed in a tube, which cannot spread it out, the light decay is very serious, additionally the original life of the straw hat tube is very short, which will be bad in less than 2,000 hours.
2) Semi-plastic half aluminum tubes: the LED tubes sold by China led tube manufacturer on the market are basically this kind of half PC half aluminum, which uses plastic on the half part needs opaque and uses aluminum alloy on the other half which doesn’t need light transmission and heat dissipation. Power is certainly inside the tubes, then LED's heat plus the heat of the power supply is quite large, because the highest power of such a lamp is about 25W. If the power is bigger, half tube cannot solve the heat problem.
2. Power supply
LED tube light power is divided into built-in and external two kinds. The so-called built-in power supply can be placed inside the tube. The biggest advantage of this built-in The
can be made into a direct replacement for existing fluorescent tubes, which doesn’t need any circuit changes. So the built-in shape can be strip, in order to be inserted into the semi-circular lamp.
1) Non-isolated constant current power supply: non-isolate means there is direct connection at the load and input terminal, so there is the risk of electric shock if you touch the load. The advantage of the non-isolated constant current source is that the circuit design is simple, the manufacturing cost is not high. The drawback is that it will introduce the high pressure of the power supply to the load side, causing the danger of electric shock.
2)Isolated constant current power supply: Isolate means there is isolation transformer to isolate in the input terminal and an output terminal. However, both can isolate the input and output. The advantage of isolated constant current source circuit is the complex design, which can avoid the risk of electric shock. The disadvantage is that the efficiency of the power supply will be reduced, and manufacturing cost is high.
3. Chips Currently the chips used in LED tube light are 3528, 2835, 3014 and other specifications, these types of specifications are mainly not the same in sizes, the chip cooling mode. The same brand chips may have the different package manufacturers, so the quality is not the same.
www.ervan.cn is a professional LED tube manufacturer located in Shenzhen, China. We specialize in manufacturing and developing quality LED tube lamp. If you are interested in our products, please feel free to contact us!
What is SMD LED?
Specifically, it is a light emitting diode which is welded and installed on the circuit board. An SMD LED is quite small, because it has no clue or the packaging around, and with the standards of the LED. This means that it is easy to be operated, for it is equipped by automated assembly equipment rather than by person. An SMD LED also has a wide viewing angle, and it does not have a standard LED epoxy enclosure, which focuses the beam...
Chinese LED Market is Expected to Exceed 100 Billion U.S. Dollars
As a new type of semiconductor light source, the birth of the LED causes the fourth lighting revolution in human history. In some developed countries, the energy saving LED has long been popular, and began to be mass popularity. Accompanied by the rise of the concept of low-carbon economy, as the most populous country in the world, the Chinese government highly recommends the use of LED light source. According to statistics, in 2011 the scale of China's LED lighting market was 21.14 billion yuan, an increase of 32.6% over the previous year...
There are countless corporate that produce LED tubes on the market, but the product quality and performance are very different, which makes the foreign trade enterprises who do not understand the line, energy companies, engineering firms, foreign-funded enterprises Procurement Office in China and other non-professionals do not know how to distinguish the quality and performance of China led tube in the procurement process. If you do not know when purchasing products, you may spend the ideal price but don’t buy their ideal product. You can purchase LED tubes from the following aspects: profiles, power and chip.
1. Profiles, structure
Now there are basically two kinds of profiles on the market: all-plastic, half plastic half-tubes. 1) All-plastic lamp: early LED tubes used all-plastic tube, because they mainly use the non-isolated power, in order to avoid the risk of electric shock problem, people hope to use all-plastic lamp. The biggest problem of this fluorescent lamp is the cooling problem, because the heat is sealed in a tube, which cannot spread it out, the light decay is very serious, additionally the original life of the straw hat tube is very short, which will be bad in less than 2,000 hours.
2) Semi-plastic half aluminum tubes: the LED tubes sold by China led tube manufacturer on the market are basically this kind of half PC half aluminum, which uses plastic on the half part needs opaque and uses aluminum alloy on the other half which doesn’t need light transmission and heat dissipation. Power is certainly inside the tubes, then LED's heat plus the heat of the power supply is quite large, because the highest power of such a lamp is about 25W. If the power is bigger, half tube cannot solve the heat problem.
2. Power supply
LED tube light power is divided into built-in and external two kinds. The so-called built-in power supply can be placed inside the tube. The biggest advantage of this built-in The
can be made into a direct replacement for existing fluorescent tubes, which doesn’t need any circuit changes. So the built-in shape can be strip, in order to be inserted into the semi-circular lamp.
1) Non-isolated constant current power supply: non-isolate means there is direct connection at the load and input terminal, so there is the risk of electric shock if you touch the load. The advantage of the non-isolated constant current source is that the circuit design is simple, the manufacturing cost is not high. The drawback is that it will introduce the high pressure of the power supply to the load side, causing the danger of electric shock.
2)Isolated constant current power supply: Isolate means there is isolation transformer to isolate in the input terminal and an output terminal. However, both can isolate the input and output. The advantage of isolated constant current source circuit is the complex design, which can avoid the risk of electric shock. The disadvantage is that the efficiency of the power supply will be reduced, and manufacturing cost is high.
3. Chips Currently the chips used in LED tube light are 3528, 2835, 3014 and other specifications, these types of specifications are mainly not the same in sizes, the chip cooling mode. The same brand chips may have the different package manufacturers, so the quality is not the same.
www.ervan.cn is a professional LED tube manufacturer located in Shenzhen, China. We specialize in manufacturing and developing quality LED tube lamp. If you are interested in our products, please feel free to contact us!
What is SMD LED?
Specifically, it is a light emitting diode which is welded and installed on the circuit board. An SMD LED is quite small, because it has no clue or the packaging around, and with the standards of the LED. This means that it is easy to be operated, for it is equipped by automated assembly equipment rather than by person. An SMD LED also has a wide viewing angle, and it does not have a standard LED epoxy enclosure, which focuses the beam...
Chinese LED Market is Expected to Exceed 100 Billion U.S. Dollars
As a new type of semiconductor light source, the birth of the LED causes the fourth lighting revolution in human history. In some developed countries, the energy saving LED has long been popular, and began to be mass popularity. Accompanied by the rise of the concept of low-carbon economy, as the most populous country in the world, the Chinese government highly recommends the use of LED light source. According to statistics, in 2011 the scale of China's LED lighting market was 21.14 billion yuan, an increase of 32.6% over the previous year...
Thursday, March 7, 2013
Notes for Gas Water Heater Usage in Winter
Special precautions for winter gas water heater usage
Winter is coming, the temperature decreases, domestic gas water heaters use frequency is increasing, in order to allow consumers to enjoy the convenience, fast, warm water life brought by the tankless gas water heaters in a safe and worry-free way, domestic gas appliances leading enterprises remind special precautions for winter gas water heater usage.
一. Pay attention to the right installation and use, and maintain indoor ventilation, prevent poisoning caused by excessive concentration of carbon monoxide.
1. In accordance with the requirements of the national standards, in addition to balanced gas water heater,stainless steel hot water heater and other types of 2. In winter, because of the cold weather, the doors and windows are often closed in the use's home, so the exhaust pipes should be installed in the ventilation place or exhaust fans should be installed. Check whether the exhaust fan is turned on each time before you use
3. Exhaust pipes must be installed with anti-down wind device, and we should always pay attention whether the exhaust pipe is unobstructed, whether there is distortion and clogging anomalies; 4. Avoid placing the exhaust pipe in the downdraught orientation at installation, if you find downdraught of the exhaust pipe or water heater flue when smoke poured from the flue in windy weather, the gas water heater should be suspended. 5. Carry out regular safety maintenance for the gas water heater to avoid gas leakage.
二．Pay attention to drain the remaining water in the tank to prevent the tank from cracking to cause pipes leaking
In winter, the temperature of most areas in the north of the Huaihe River in China is below 0 ℃, if don’t carry out freezing treatment in such climatic conditions, the residual water in the gas water heater tank may cause the tank cracking in cold conditions, eventually leading to gas water heater scrapped and pipeline leaks, even the products with active antifreeze function still exist this risk. Further, since the air can enter the gas water heater exhaust flue, cool air in winter may cause the condensation of the residual water in the water tank and cause the tank cracking. Therefore, special attention should be paid to the antifreeze processing of the gas water heater.
1. When the temperature is below 0 ° C, the complete operating prevention tank cracking can be finished according to the following five steps: close the gas valve and cut off the power supply; close the inlet valve; open the hot water valve; turn the temperature adjustment knob to the "low-temperature" or "large water "position; Removing the drain valve for drainage. If used again, we must first fit the drain valve before normal use
2. The work environment temperature for gas water heater with an active antifreeze function must about -15 ℃. Therefore, in order to avoid not being able to grasp the environmental temperature changes and unforeseen circumstances occurrence, user with active antifreeze function gas water heater is recommended to complete the prevention tank cracking operation in accordance with the above steps after each use.
www.ouyi-kitchenappliance.com is a leading supplier specializing in household appliances, selling more than 2.8 million products to the global markets every year. OUYI products include range hood, gas stove, sterilizer, gas/electrical water heater, gas cooker with oven, gas heater, bath warmer, etc.
If you are interested in our products, please feel free to contact us!
Winter is coming, the temperature decreases, domestic gas water heaters use frequency is increasing, in order to allow consumers to enjoy the convenience, fast, warm water life brought by the tankless gas water heaters in a safe and worry-free way, domestic gas appliances leading enterprises remind special precautions for winter gas water heater usage.
一. Pay attention to the right installation and use, and maintain indoor ventilation, prevent poisoning caused by excessive concentration of carbon monoxide.
1. In accordance with the requirements of the national standards, in addition to balanced gas water heater,stainless steel hot water heater and other types of 2. In winter, because of the cold weather, the doors and windows are often closed in the use's home, so the exhaust pipes should be installed in the ventilation place or exhaust fans should be installed. Check whether the exhaust fan is turned on each time before you use
3. Exhaust pipes must be installed with anti-down wind device, and we should always pay attention whether the exhaust pipe is unobstructed, whether there is distortion and clogging anomalies; 4. Avoid placing the exhaust pipe in the downdraught orientation at installation, if you find downdraught of the exhaust pipe or water heater flue when smoke poured from the flue in windy weather, the gas water heater should be suspended. 5. Carry out regular safety maintenance for the gas water heater to avoid gas leakage.
二．Pay attention to drain the remaining water in the tank to prevent the tank from cracking to cause pipes leaking
In winter, the temperature of most areas in the north of the Huaihe River in China is below 0 ℃, if don’t carry out freezing treatment in such climatic conditions, the residual water in the gas water heater tank may cause the tank cracking in cold conditions, eventually leading to gas water heater scrapped and pipeline leaks, even the products with active antifreeze function still exist this risk. Further, since the air can enter the gas water heater exhaust flue, cool air in winter may cause the condensation of the residual water in the water tank and cause the tank cracking. Therefore, special attention should be paid to the antifreeze processing of the gas water heater.
1. When the temperature is below 0 ° C, the complete operating prevention tank cracking can be finished according to the following five steps: close the gas valve and cut off the power supply; close the inlet valve; open the hot water valve; turn the temperature adjustment knob to the "low-temperature" or "large water "position; Removing the drain valve for drainage. If used again, we must first fit the drain valve before normal use
2. The work environment temperature for gas water heater with an active antifreeze function must about -15 ℃. Therefore, in order to avoid not being able to grasp the environmental temperature changes and unforeseen circumstances occurrence, user with active antifreeze function gas water heater is recommended to complete the prevention tank cracking operation in accordance with the above steps after each use.
www.ouyi-kitchenappliance.com is a leading supplier specializing in household appliances, selling more than 2.8 million products to the global markets every year. OUYI products include range hood, gas stove, sterilizer, gas/electrical water heater, gas cooker with oven, gas heater, bath warmer, etc.
If you are interested in our products, please feel free to contact us!
Subscribe to:
Posts (Atom)