Safety and Importance of Biodegradable Tableware
With the implementation of the "Food Safety Law" and other relevant food safety regulations and policies, the food packaging industry,
product quality has been greatly improved. However, are there any disposable tableware products which have not been issued still in
production and sales? And certified products are really safe and secure? There is no quality problem? Recently, the International Food
Packaging Association put forward the scientific countermeasures and suggestions to solve the problems of disposable plastic tableware,
disposable biodegradable tableware, as well as related products in contact with food, such as instant noodle bowls, fresh tray, tea cups,
tofu box survey detected released, while the abuse of raw and auxiliary materials and additives as well as indiscriminate labeling product
information.
Various Biodegradable Dinnerware is Unqualified
It is understood that, in June 2012, the International Food Packaging Association in Beijing Hyflux environmental technology consulting
center formed an investigation team on the wholesale market in Beijing, Guangdong, vendors, supermarket sales and use disposable
biodegradable dinnerware, plastic bowls, fresh tray, tofu boxes, plastic cups, etc. to investigate, and randomly purchased 31 kinds of
products, sent to a qualified testing agency for testing. The result shows that qualified for 20 species, 11 kinds of substandard, a pass
rate of 64.5%. Supermarket submission products involving 15 species, while only 8 are qualified, 7 failed. Carrefour supermarkets and Wal-
Mart supermarket sales of white plastic tray detection failed. The survey found that only 70% of the sellers to understand the state of the
implementation of the requirements of the market access of disposable plastic tableware, boycott the sale of illegal production license, and
sales of the product can do to obtain the production license of the production enterprises, inspection report, and business license.
Strengthen Management to Biodegradable Dinnerware is Important
It is reported that China has a clear selection of raw and auxiliary materials for food containers, packaging materials and other
requirements, and the majority of manufacturing enterprises are in accordance with national regulations and standards requirements, the use
of new food-grade raw material production, talc and other additives used also in line with the food-grade requirements. The survey found that
individual enterprises illegal use of industrial grade talc, purchased scrap production of disposable polystyrene tableware, but for
qualified post-test data. Therefore, for the supervision of the production enterprises, the sources of raw materials, procurement,
production, processing, storage and multi-link should be monitored in order to prevent such violations.
www.biodegradabletableware.com.cn, as one of the biggest biodegradable tableware manufacturer in China, Shenling Environmentally Friendly
Packing Materials Co., Ltd. is specialized in production of eco-friendly paper tableware. Welcome to visit our website!
Monday, January 28, 2013
Friday, January 25, 2013
Love bee tidal official also said that consumers should try to choose a well-qualified shopping platform
The Yuquanying official said, consumers do not see the kind best not easily order. The online shopping experience people know, due to the problem of computer imaging and shooting style, online picture is likely to exist with the physical color or shape differences.
Yuquanying, almost online shopping customers are optimistic about the stuff go to the store, to order online, so there is a chance of deviation will be greatly reduced.
And the love Bee tide and home related staff also said that online purchase furniture difficult to exist independently of experience out of line. For consumers to see the experience the store can see a more comprehensive product design, through face-to-face sales staff introduced a more comprehensive understanding of the product quality, performance. Once the quality problems, consumers can go to the store for help.
Love bee tidal official also said that consumers should try to choose a well-qualified shopping platform. A good shopping platform management system is relatively sound, to control the sale of products, businesses behavior and accreditation strict Returns the provisions of the aftermarket and the products in question are relatively comprehensive.
Reminders
The product basic features need to master before online shopping
Recently, the China Consumers' Association published in its official website on network consumption series Warning, not like the pick in the Marketplace, you can actually view online shopping home and other special furniture, building materials, colors, materials, environmental protection performance It is difficult to determine.
Association reminds consumers and must clear grasp of the basic characteristics of the product before buying, whether after-sales service, acceptance should be particularly careful not clear responsibility can not be easily confirmed and signed before.
Yuquanying, almost online shopping customers are optimistic about the stuff go to the store, to order online, so there is a chance of deviation will be greatly reduced.
And the love Bee tide and home related staff also said that online purchase furniture difficult to exist independently of experience out of line. For consumers to see the experience the store can see a more comprehensive product design, through face-to-face sales staff introduced a more comprehensive understanding of the product quality, performance. Once the quality problems, consumers can go to the store for help.
Love bee tidal official also said that consumers should try to choose a well-qualified shopping platform. A good shopping platform management system is relatively sound, to control the sale of products, businesses behavior and accreditation strict Returns the provisions of the aftermarket and the products in question are relatively comprehensive.
Reminders
The product basic features need to master before online shopping
Recently, the China Consumers' Association published in its official website on network consumption series Warning, not like the pick in the Marketplace, you can actually view online shopping home and other special furniture, building materials, colors, materials, environmental protection performance It is difficult to determine.
Association reminds consumers and must clear grasp of the basic characteristics of the product before buying, whether after-sales service, acceptance should be particularly careful not clear responsibility can not be easily confirmed and signed before.
Eco-friendly Biodegradable Tableware is Difficult to Promote
Biodegradable Tableware Industry Status
Thirteen years ago, China has banned the widely use of disposable plastic tableware, but despite the white foam pollution is banned but it still exists, seeing our country has become a white foam alternative - environmentally friendly paper products production base in the global, but it is ironic that the commodity produced from this the base, more than 95% of the them are exported to Europe and the United States and other developed countries and regions, those that can be sold in the domestic market share is just very little. Survey by the reporter found that, under the pressure of the financial crisis, the environmental protection industry, as one of China's strategic emerging new material industries, the domestic paper environmentally friendly tableware products companies must constantly develop safer and more environmentally friendly paper tableware, and take efforts to improve product quality to occupy a place in the market. Shenling Environmentally Friendly Packing always insists on the research and development of environmental friendly biodegradable tableware and committed to win the market by high quality.
Disposable Tableware is Difficult to Eliminate
The people in the industry for the production of paper tableware have the habits: they never use the fast food packaging and the polyethylene plastic tableware, because they know that more than 99% of the fast noodle box-shaped cardboard tableware packaging products must pass the curtain coating surface treatment process in order to have the function of water and oil repellency, which commonly known as "waxing". In 1999, the Economic and Trade Commission of China was issued the documents against "white pollution". Government departments in 2001 again emphasized the prohibition of "white pollution". The main content of this official document and all levels of government white pollution said: prohibit the use of disposable plastic products that is non-biodegradable. Disposable foam plastic dinnerware that is ranked in the products listed, the phase-out period is 2000. However, a variety of disposable tableware wholesale is still sold in many markets.
Paper Biodegradable Tableware Export Pressure
Now there are more than 100 paper tableware manufacturers in the country, but 99% of the markets are all in Europe and the United States. U.S. government makes efforts to promote the "forbidden white make enforcement", the first time is warning, the second time is heavy penalties, and the third time is to revoke the business license, and operators of such environmentally friendly products market has expanded each year, in the United States, most of the one-time tableware is paper products, if provided by the manufacturer of polyethylene plastic tableware it must be responsible for 100% recovery. However, in the domestic paper tableware sales accounted for only disposable tableware 2% of the market. The root cause of the white foam lunch boxes of environmentally friendly paper tableware lost to the disposable tableware market is price, the white foam lunch boxes are only 0.1 RMB, while a paper lunch box price is 0.25 RMB, which is 2.5 times that of the former. In addition, pressure of paper tableware exports increases, and the enterprises hope for domestic market share.
www.biodegradabletableware.com.cn, as one of the biggest biodegradable tableware manufacturer in China, Shenling Environmentally Friendly Packing Materials Co., Ltd. is specialized in production of eco-friendly paper tableware. Welcome to visit our website!
Thirteen years ago, China has banned the widely use of disposable plastic tableware, but despite the white foam pollution is banned but it still exists, seeing our country has become a white foam alternative - environmentally friendly paper products production base in the global, but it is ironic that the commodity produced from this the base, more than 95% of the them are exported to Europe and the United States and other developed countries and regions, those that can be sold in the domestic market share is just very little. Survey by the reporter found that, under the pressure of the financial crisis, the environmental protection industry, as one of China's strategic emerging new material industries, the domestic paper environmentally friendly tableware products companies must constantly develop safer and more environmentally friendly paper tableware, and take efforts to improve product quality to occupy a place in the market. Shenling Environmentally Friendly Packing always insists on the research and development of environmental friendly biodegradable tableware and committed to win the market by high quality.
Disposable Tableware is Difficult to Eliminate
The people in the industry for the production of paper tableware have the habits: they never use the fast food packaging and the polyethylene plastic tableware, because they know that more than 99% of the fast noodle box-shaped cardboard tableware packaging products must pass the curtain coating surface treatment process in order to have the function of water and oil repellency, which commonly known as "waxing". In 1999, the Economic and Trade Commission of China was issued the documents against "white pollution". Government departments in 2001 again emphasized the prohibition of "white pollution". The main content of this official document and all levels of government white pollution said: prohibit the use of disposable plastic products that is non-biodegradable. Disposable foam plastic dinnerware that is ranked in the products listed, the phase-out period is 2000. However, a variety of disposable tableware wholesale is still sold in many markets.
Paper Biodegradable Tableware Export Pressure
Now there are more than 100 paper tableware manufacturers in the country, but 99% of the markets are all in Europe and the United States. U.S. government makes efforts to promote the "forbidden white make enforcement", the first time is warning, the second time is heavy penalties, and the third time is to revoke the business license, and operators of such environmentally friendly products market has expanded each year, in the United States, most of the one-time tableware is paper products, if provided by the manufacturer of polyethylene plastic tableware it must be responsible for 100% recovery. However, in the domestic paper tableware sales accounted for only disposable tableware 2% of the market. The root cause of the white foam lunch boxes of environmentally friendly paper tableware lost to the disposable tableware market is price, the white foam lunch boxes are only 0.1 RMB, while a paper lunch box price is 0.25 RMB, which is 2.5 times that of the former. In addition, pressure of paper tableware exports increases, and the enterprises hope for domestic market share.
www.biodegradabletableware.com.cn, as one of the biggest biodegradable tableware manufacturer in China, Shenling Environmentally Friendly Packing Materials Co., Ltd. is specialized in production of eco-friendly paper tableware. Welcome to visit our website!
Thursday, January 24, 2013
China Gas Stove Parts Industry Development Status
Chinese Gas Stove Parts Industry Becomes Matured
China gas stove parts and machine industry segments are completed probably in the 90s of the last century. And this is marked by the emergence of key components and panel specialist manufacturers such as such as controller (plug valves assembly), burner and the pulse ignition. And then after the development of the first 10 years of this century, gas electric oven parts industry spent the formative years, and started towards the threshold of maturity, and formed the two distinctive industry clusters of the Pearl River Delta and Yangtze River Delta.
Universal Use of Chinese Middle & Low End Gas Stove
Currently, most parts of China has initially completed the universal use of middle and low end built in gas oven product, but the high, medium and low-end products market differences in the regional distribution of sales volume differences are also very obvious. As the parts industry is in a subordinate position, by the pattern of the whole industry is very large, but also by the upstream industries such as suppliers of raw materials and hardware processing extrusion, belongs to survive in the cracks of the state. And in the industry is quite a mixed bag, the number of enterprises certified by qualified suppliers is much smaller than the number of general practitioners. But the future opportunities belong to enterprises that can grasp the trend and initiative ability and strategic layout.
Maturity Features of Gas Stove Parts Industry
According to the several major industrial economics of the industry life cycle and criteria for the classification of the auxiliary, our gas stove parts industry maturity has the following main characteristics: the industrial added value growth rate began to decline rapidly but also at the higher level. Industry life cycle curve is generally depicted in accordance with the growth rate of industrial added value, time-series data, and the gas stove parts industry market sales increases and the total value of the growth rate has begun to decline in recent years, but is about 20% higher than high level. This highest level of the period before and after 2000, had reached more than 40%, several main parts of the leading enterprises in the past decade the growth process are close to the track. This is due to the entire size of the market becomes large that base of basic blanking of market gap is to be filled, and the reduction of first buying behavior.
www.vatti-china.com is a leading professional company in China which specialized in the production and marketing of household appliance such as electric built-in ovens, gas ovens. And we have the products series such as gas hob, electric hob, gas water heater and cooker hood. Our products are well known in the world. Welcome to have a look at our page!
China gas stove parts and machine industry segments are completed probably in the 90s of the last century. And this is marked by the emergence of key components and panel specialist manufacturers such as such as controller (plug valves assembly), burner and the pulse ignition. And then after the development of the first 10 years of this century, gas electric oven parts industry spent the formative years, and started towards the threshold of maturity, and formed the two distinctive industry clusters of the Pearl River Delta and Yangtze River Delta.
Universal Use of Chinese Middle & Low End Gas Stove
Currently, most parts of China has initially completed the universal use of middle and low end built in gas oven product, but the high, medium and low-end products market differences in the regional distribution of sales volume differences are also very obvious. As the parts industry is in a subordinate position, by the pattern of the whole industry is very large, but also by the upstream industries such as suppliers of raw materials and hardware processing extrusion, belongs to survive in the cracks of the state. And in the industry is quite a mixed bag, the number of enterprises certified by qualified suppliers is much smaller than the number of general practitioners. But the future opportunities belong to enterprises that can grasp the trend and initiative ability and strategic layout.
Maturity Features of Gas Stove Parts Industry
According to the several major industrial economics of the industry life cycle and criteria for the classification of the auxiliary, our gas stove parts industry maturity has the following main characteristics: the industrial added value growth rate began to decline rapidly but also at the higher level. Industry life cycle curve is generally depicted in accordance with the growth rate of industrial added value, time-series data, and the gas stove parts industry market sales increases and the total value of the growth rate has begun to decline in recent years, but is about 20% higher than high level. This highest level of the period before and after 2000, had reached more than 40%, several main parts of the leading enterprises in the past decade the growth process are close to the track. This is due to the entire size of the market becomes large that base of basic blanking of market gap is to be filled, and the reduction of first buying behavior.
www.vatti-china.com is a leading professional company in China which specialized in the production and marketing of household appliance such as electric built-in ovens, gas ovens. And we have the products series such as gas hob, electric hob, gas water heater and cooker hood. Our products are well known in the world. Welcome to have a look at our page!
Wednesday, January 23, 2013
Online shopping looks beautiful furniture inexpensive actual consumption of consumer protection
Why the price advantage of the network to buy the furniture will be it? On the one hand, network furniture company Furniture stores venue, decoration, sample sales personnel costs, can be shipped flat price, puerile;
Another reason, most of the network sales of furniture export cheap furniture, furniture supply itself, some of the style is followed by the export of furniture orders take the goods, some of the best-selling products, a large number of customized, can get some concessions on price. Although online shopping cheap furniture, but not all the furniture for online shopping, and the most important is to choose a reputable network furniture sales company, best if feasible In fact, the body shop to see the goods. Are generally more powerful network furniture company, both own the physical product showroom.
Online shopping bulk furniture needs more eye
Online shopping goods, hardware, textile goods, small pieces of decorations, easy mailed rarely produce aftermarket disputes selling well, the general type of product buyers comments are basically praise. Large pieces of furniture mainly divided into two categories: the part of the panel furniture buyers DIY and tablet packaging, easy to transport, such furniture is more in line with the convenience of online shopping, low prices and good sales. Another part of the furniture, because the buyer can not assemble, direct sale in the shop finished or need Professionals door installation, sofa, solid wood furniture, the price is relatively high. Online shopping this bulk objects, still need to be careful for the wonderful, the length of an eye.
Gratifying development of online shopping in China
With the the further universal application of the Internet in China, online shopping is becoming one of the people's consumption behavior. , CNNIC telephone survey, carried out a survey in June 2008 of 19 economically developed cities, the four municipalities of Beijing, Shanghai, Chongqing and Tianjin, 15 sub-provincial cities as Guangzhou, Shenzhen, Shenyang, Harbin, Changchun and so on. Access used the Internet and Internet users bought something online in the six months. The report shows that, in the 19 cities surveyed, online shopping in the first half amounted to $ 162 billion. The sex ratio, male network share the total amount of 84 billion, slightly less than the amount of women online shopping men reach 78 billion. , The total amount of students for six months online shopping has reached 3.1 billion, nearly 1/4 of the total amount of non-students for six months online shopping.
Another reason, most of the network sales of furniture export cheap furniture, furniture supply itself, some of the style is followed by the export of furniture orders take the goods, some of the best-selling products, a large number of customized, can get some concessions on price. Although online shopping cheap furniture, but not all the furniture for online shopping, and the most important is to choose a reputable network furniture sales company, best if feasible In fact, the body shop to see the goods. Are generally more powerful network furniture company, both own the physical product showroom.
Online shopping bulk furniture needs more eye
Online shopping goods, hardware, textile goods, small pieces of decorations, easy mailed rarely produce aftermarket disputes selling well, the general type of product buyers comments are basically praise. Large pieces of furniture mainly divided into two categories: the part of the panel furniture buyers DIY and tablet packaging, easy to transport, such furniture is more in line with the convenience of online shopping, low prices and good sales. Another part of the furniture, because the buyer can not assemble, direct sale in the shop finished or need Professionals door installation, sofa, solid wood furniture, the price is relatively high. Online shopping this bulk objects, still need to be careful for the wonderful, the length of an eye.
Gratifying development of online shopping in China
With the the further universal application of the Internet in China, online shopping is becoming one of the people's consumption behavior. , CNNIC telephone survey, carried out a survey in June 2008 of 19 economically developed cities, the four municipalities of Beijing, Shanghai, Chongqing and Tianjin, 15 sub-provincial cities as Guangzhou, Shenzhen, Shenyang, Harbin, Changchun and so on. Access used the Internet and Internet users bought something online in the six months. The report shows that, in the 19 cities surveyed, online shopping in the first half amounted to $ 162 billion. The sex ratio, male network share the total amount of 84 billion, slightly less than the amount of women online shopping men reach 78 billion. , The total amount of students for six months online shopping has reached 3.1 billion, nearly 1/4 of the total amount of non-students for six months online shopping.
Oven Small Appliances Break Out a New Path
Break-through Road of Oven Manufacturing
It is understood that, just as other enterprises in the Pearl River Delta, oven enterprises are also facing a decline in exports, the small appliance industry need to explore new paths to bring a chance of survival. Some small household electrical appliance enterprises in a timely manner with the vigorous development trend of e-commerce, to expand the electricity supplier channels, to find a new industry break through road. The PRD concentrated a large number of small and medium-sized, small and medium enterprises earliest engaged in the manufacture of professional oven brands manufacturing companies, Vatti is one of them. Signs of a global economic recovery is uncertain, but it is no longer possible on the overall economic environment in China like the reform and opening up 30 years ago as fast growth, how to break through from the low value-added manufacturing? Many household electrical appliance enterprises have been thinking about the question.
New Value in the Services Field of Oven Industry
"In the past 10 years, the service industry will be a walk in the forefront of the industry." 10 years ago, the former IBM CEO Lou Gerstner said. When he said this sentence, he cannot see the changes in China today, but he had not expected that, after he led IBM to a successful transformation, many enterprises that were once regarded as manufacturing giant companies have begun to turn their attention to service industries, his words affect and reflect the changes in the various industries today. The survey found that 70% ownership of the built in ovens is idle, small consumer appliances, and either does not understand either the trouble or not atmosphere. They desperately need a service provider to guide them to use and share the experience with them. The survey data also shows that, in the annual list of consumer spending accounting of an electric oven baking enthusiasts is less than 10%, while more than 90% is the costs for the purchase of materials.
E-commerce Strength of Oven Industry
Vatti also found many network friends and food bloggers spontaneously use Vatti electric ovens as baking recipe, and share on the Internet with other net users, forming a circle, and accumulates a large number of "fans". Currently, popular bloggers are active in a variety of cuisines website active baked fans gathered around an average of not less than 300 people. The conditions have been met. "Oven industry must solve the use problem of consumers after the oven lovers buy the oven, the SNS marketing is matured in the circle of baking lovers. This will be the strategic transformation starting point of Vatti, the best time of the restructuring of the Vatti oven for home baking service has arrived. Change from oven manufacturing to the home baking service, to provide a full range of home baking for Chinese consumers. This transformation can provide an idea to many appliance manufacturers who are thinking about restructuring.
www.vatti-china.com is a leading professional company in China which specialized in the production and marketing of household appliance such as electric built-in ovens, gas ovens. And we have the products series such as gas hob, electric hob, gas water heater and cooker hood. Our products are well known in the world. Welcome to have a look at our page!
It is understood that, just as other enterprises in the Pearl River Delta, oven enterprises are also facing a decline in exports, the small appliance industry need to explore new paths to bring a chance of survival. Some small household electrical appliance enterprises in a timely manner with the vigorous development trend of e-commerce, to expand the electricity supplier channels, to find a new industry break through road. The PRD concentrated a large number of small and medium-sized, small and medium enterprises earliest engaged in the manufacture of professional oven brands manufacturing companies, Vatti is one of them. Signs of a global economic recovery is uncertain, but it is no longer possible on the overall economic environment in China like the reform and opening up 30 years ago as fast growth, how to break through from the low value-added manufacturing? Many household electrical appliance enterprises have been thinking about the question.
New Value in the Services Field of Oven Industry
"In the past 10 years, the service industry will be a walk in the forefront of the industry." 10 years ago, the former IBM CEO Lou Gerstner said. When he said this sentence, he cannot see the changes in China today, but he had not expected that, after he led IBM to a successful transformation, many enterprises that were once regarded as manufacturing giant companies have begun to turn their attention to service industries, his words affect and reflect the changes in the various industries today. The survey found that 70% ownership of the built in ovens is idle, small consumer appliances, and either does not understand either the trouble or not atmosphere. They desperately need a service provider to guide them to use and share the experience with them. The survey data also shows that, in the annual list of consumer spending accounting of an electric oven baking enthusiasts is less than 10%, while more than 90% is the costs for the purchase of materials.
E-commerce Strength of Oven Industry
Vatti also found many network friends and food bloggers spontaneously use Vatti electric ovens as baking recipe, and share on the Internet with other net users, forming a circle, and accumulates a large number of "fans". Currently, popular bloggers are active in a variety of cuisines website active baked fans gathered around an average of not less than 300 people. The conditions have been met. "Oven industry must solve the use problem of consumers after the oven lovers buy the oven, the SNS marketing is matured in the circle of baking lovers. This will be the strategic transformation starting point of Vatti, the best time of the restructuring of the Vatti oven for home baking service has arrived. Change from oven manufacturing to the home baking service, to provide a full range of home baking for Chinese consumers. This transformation can provide an idea to many appliance manufacturers who are thinking about restructuring.
www.vatti-china.com is a leading professional company in China which specialized in the production and marketing of household appliance such as electric built-in ovens, gas ovens. And we have the products series such as gas hob, electric hob, gas water heater and cooker hood. Our products are well known in the world. Welcome to have a look at our page!
Tuesday, January 22, 2013
Elementary Knowledge of Electronic Tester
Concept of Electronic Tester
Electronic instruments are including electronic measuring instruments and electronic appliances, and they measure by using electronic technology, observation instruments, devices and systems of the power non-electricity, or for measurement purposes and the supply of light, electricity, and measurement accessories. The measurements include data acquisition, storage, display, printing, graphic, processing and transmission and other information products. Types and Ranges of Electrical Testers Basic instruments and general instruments: they are more used in the digital multimeters, power supplies, function generators, counters and plug socket tester. RF and microwave instruments and systems: spectrum analyzers, network analyzers, signal generators, power meters, noise figure analyzers, oscilloscopes, logic analyzers and digital test: oscilloscope, logic analyzer, the simulation trace port analyzer, BERT. Test and measurement software and connectivity: test and measurement tools set, VEE, TestExec SL IntuiLink, IVI, connectivity ... test systems and system components: functional testing, VXI data acquisition for the construction of parts of the test system and software. Lightwave instruments and systems: optical component testing, optical wave converter, communication analysis analyzer (DCA), wavelength meter, light switch. Semiconductor test equipment: memory test, wafer parametric testing, system-on-chip (SOC) test, RFIC testing. Test and measurement accessories, cabinet, cable: cabinets, cables, probes, test vehicle, Rackmount kit. Major Technology Trends of Electrical Tester Now the electrical test equipment and systems are in a period of multi-bus interface coexist chaos. Special large-scale integrated circuits and programmable devices are commonly used instrument which not only protect their own patents, and more important to change the ideas and design of digital circuits and computer systems design. Computer systems and the use of LSI, completely changed design ideas of people, high demands on the designers and, more important, the test instrument can directly adopt the latest achievements of the computer, so that the replacement rate of the instrument with the computer to maintain synchronization. Overall technical level of domestic testing instrument: Universal benchtop: microwave and millimeter wave instrument categories basically have complete varieties, broadband coaxial instrument is up to 40GHz to 110GHz millimeter-wave waveguide instrument; complete range of fiber optic instruments; communication instrument test rate is 2.4Gb / s; data acquisition instrument digitization rate is up to 1GSa / s and a bandwidth of 500MHz. The VXI bus modular test instruments: VXI test module type spectrum series has begun to take shape, the automatic test system can be used for the formation of the radio-frequency, low frequency and data acquisition. Automatic test systems and fault diagnosis: a number of practical test system developed and successfully applied to the development, production and maintenance of weapons and equipment testing, circuit board fault diagnosis system to achieve a breakthrough.
Electronic instruments are including electronic measuring instruments and electronic appliances, and they measure by using electronic technology, observation instruments, devices and systems of the power non-electricity, or for measurement purposes and the supply of light, electricity, and measurement accessories. The measurements include data acquisition, storage, display, printing, graphic, processing and transmission and other information products. Types and Ranges of Electrical Testers Basic instruments and general instruments: they are more used in the digital multimeters, power supplies, function generators, counters and plug socket tester. RF and microwave instruments and systems: spectrum analyzers, network analyzers, signal generators, power meters, noise figure analyzers, oscilloscopes, logic analyzers and digital test: oscilloscope, logic analyzer, the simulation trace port analyzer, BERT. Test and measurement software and connectivity: test and measurement tools set, VEE, TestExec SL IntuiLink, IVI, connectivity ... test systems and system components: functional testing, VXI data acquisition for the construction of parts of the test system and software. Lightwave instruments and systems: optical component testing, optical wave converter, communication analysis analyzer (DCA), wavelength meter, light switch. Semiconductor test equipment: memory test, wafer parametric testing, system-on-chip (SOC) test, RFIC testing. Test and measurement accessories, cabinet, cable: cabinets, cables, probes, test vehicle, Rackmount kit. Major Technology Trends of Electrical Tester Now the electrical test equipment and systems are in a period of multi-bus interface coexist chaos. Special large-scale integrated circuits and programmable devices are commonly used instrument which not only protect their own patents, and more important to change the ideas and design of digital circuits and computer systems design. Computer systems and the use of LSI, completely changed design ideas of people, high demands on the designers and, more important, the test instrument can directly adopt the latest achievements of the computer, so that the replacement rate of the instrument with the computer to maintain synchronization. Overall technical level of domestic testing instrument: Universal benchtop: microwave and millimeter wave instrument categories basically have complete varieties, broadband coaxial instrument is up to 40GHz to 110GHz millimeter-wave waveguide instrument; complete range of fiber optic instruments; communication instrument test rate is 2.4Gb / s; data acquisition instrument digitization rate is up to 1GSa / s and a bandwidth of 500MHz. The VXI bus modular test instruments: VXI test module type spectrum series has begun to take shape, the automatic test system can be used for the formation of the radio-frequency, low frequency and data acquisition. Automatic test systems and fault diagnosis: a number of practical test system developed and successfully applied to the development, production and maintenance of weapons and equipment testing, circuit board fault diagnosis system to achieve a breakthrough.
Monday, January 21, 2013
Notes for Buying Common Kitchen Appliances
Expertise is necessary to buy kitchen appliances
In the face of so many kitchen appliances styles from many brands on the market, how we should choose the most kitchen appliances suitable for ourselves? If you don’t understand the knowledge about home kitchen appliances, then you may take or even waste a long time for selection. Therefore, acquire a certain amount of expertise is necessary for you to buy kitchen appliances. Now, the electrical kitchen expert Loyalty will tell you several notes to buy common kitchen appliances:
Range hood: fume extraction effect, whether cleaning is convenient
As essential cleaning tool in the kitchen, the fume extraction effect of range hoods must be first condition for the consumers to consider at the time of purchase. In general, European-style hood suction is less than the nearly suction smoke machine, but as long as the displacement is more than 11 cubic meters / minute, that is the large suction hood, which can meet the needs of ordinary families.
Gas stoves: big firepower is not necessarily a good stove
There is a misunderstanding in the minds of many consumers: the greater the firepower, the better the gas stove. For the psychological misunderstanding, some gas stove manufacturer begin to trumpet the firepower and energy efficient of their products. But the greater the firepower is on behalf that the air consumption per unit time is greater, therefore the so-called big firepower and energy saving is untenable.
The gas engineers of Loyalty appliances found that the heat flow control in the home embedded gas stove controlled between 3.5KW-4.0KW can make the fire large enough over a long period of research, in the same time, the thermal efficiency is higher, combustion is sufficiently and stable, which can optimally reach the combustion equilibrium point. Therefore, in the purchase of gas stoves, consumers should note that the heat flow (firepower) must be greater than 2.91KW (GB), but should not be more than 4.0KW; fully burned (CO emission) must be less than 0.05%; flame automatic valve closing time of the protection device should be less than 60 seconds. The gas stove in compliance with these standards is of high quality.
The disinfecting cabinet: Know itself as you wish
With the improvement of living standards, there are more and more families to use disinfecting cabinet, but not all are aware of their own needs for what kind of style before they buy. Experts remind you that the purchase of such products should be in accordance with the specific circumstances of the family. The word of mouth is very important for the selection of kitchen appliances in fact. The brand recognized by the public is more reliable than any publicity. It is best for the consumers to first recognize its brand and know whether it has perfect service before understand the details of a product. The integrity of the Loyalty electrical service is one of the more perfect. We firmly believe that the client is the God, implement pre-sale, sale, after-sale and return visit full-service, which effectively solve the customer's worries.
This article come from:http://www.office-storagecabinets.com/index.php/notes-for-buying-common-kitchen-appliances.htm
In the face of so many kitchen appliances styles from many brands on the market, how we should choose the most kitchen appliances suitable for ourselves? If you don’t understand the knowledge about home kitchen appliances, then you may take or even waste a long time for selection. Therefore, acquire a certain amount of expertise is necessary for you to buy kitchen appliances. Now, the electrical kitchen expert Loyalty will tell you several notes to buy common kitchen appliances:
Range hood: fume extraction effect, whether cleaning is convenient
As essential cleaning tool in the kitchen, the fume extraction effect of range hoods must be first condition for the consumers to consider at the time of purchase. In general, European-style hood suction is less than the nearly suction smoke machine, but as long as the displacement is more than 11 cubic meters / minute, that is the large suction hood, which can meet the needs of ordinary families.
Gas stoves: big firepower is not necessarily a good stove
There is a misunderstanding in the minds of many consumers: the greater the firepower, the better the gas stove. For the psychological misunderstanding, some gas stove manufacturer begin to trumpet the firepower and energy efficient of their products. But the greater the firepower is on behalf that the air consumption per unit time is greater, therefore the so-called big firepower and energy saving is untenable.
The gas engineers of Loyalty appliances found that the heat flow control in the home embedded gas stove controlled between 3.5KW-4.0KW can make the fire large enough over a long period of research, in the same time, the thermal efficiency is higher, combustion is sufficiently and stable, which can optimally reach the combustion equilibrium point. Therefore, in the purchase of gas stoves, consumers should note that the heat flow (firepower) must be greater than 2.91KW (GB), but should not be more than 4.0KW; fully burned (CO emission) must be less than 0.05%; flame automatic valve closing time of the protection device should be less than 60 seconds. The gas stove in compliance with these standards is of high quality.
The disinfecting cabinet: Know itself as you wish
With the improvement of living standards, there are more and more families to use disinfecting cabinet, but not all are aware of their own needs for what kind of style before they buy. Experts remind you that the purchase of such products should be in accordance with the specific circumstances of the family. The word of mouth is very important for the selection of kitchen appliances in fact. The brand recognized by the public is more reliable than any publicity. It is best for the consumers to first recognize its brand and know whether it has perfect service before understand the details of a product. The integrity of the Loyalty electrical service is one of the more perfect. We firmly believe that the client is the God, implement pre-sale, sale, after-sale and return visit full-service, which effectively solve the customer's worries.
This article come from:http://www.office-storagecabinets.com/index.php/notes-for-buying-common-kitchen-appliances.htm
Tips For Buying Leather Laptop Bags For Men
Nowadays, a laptop or a notebook computer is a must-have product which has become one of the most widely applied equipments for lots of modern business men and women as well as college students. It is very dangerous to carry your laptop or computer note book with you for they are easily damaged or broken. Then you have to spend a lot of money to repair and what’s worse, your computer note book cannot be repaired or everything you store in your computer gets lost if you did not pack up all your information. In order to protect your laptop or notebook, you may find a lot of different laptop bags on the market. Among them, the most popular design belongs to the traditional styled leather laptop bags for men.
These leather laptop bags for men are not only for carrying your laptop but it has compartments for business cards, pens, PDA's and paperwork and files just like a standard briefcase, at the same time each of the usual laptop or notebook accessories like energy cords and mouse mat, external drives and so forth. The computer notebook bag will let you carry all this plus it's a cushioned section for your laptop for protection. You do have to be really cautious when purchasing your bag because the bags can be found in various sizes and so do the laptops which range from the 10 inch display to the greater 17 inch screened laptops. The best thing to do should be to measure the size of your laptop or notebook, which means that you can then buy the proper sized leather laptop bags for men.
When people decide to purchase their leather laptop bags, they would not only tent to choose the standard black color, but also other various colors choice such as red, blue, pink, white, orange and green on the market. Moreover, other different designs of this kind of leather laptop bags are available for your option, like your favorite football or baseball team. You may be given a La Folie laptop bag with logos of their companies placed on as a complementary gift or promotional present when you buy your laptop. The leather laptop bags on the market are available at very reasonable prices, but some made by the designers are very expensive. If you want to buy an affordable la Folie laptop bag, online shopping is a good idea where you can usually acquire them at the discounted prices cheap jerseys.
These leather laptop bags for men are not only for carrying your laptop but it has compartments for business cards, pens, PDA's and paperwork and files just like a standard briefcase, at the same time each of the usual laptop or notebook accessories like energy cords and mouse mat, external drives and so forth. The computer notebook bag will let you carry all this plus it's a cushioned section for your laptop for protection. You do have to be really cautious when purchasing your bag because the bags can be found in various sizes and so do the laptops which range from the 10 inch display to the greater 17 inch screened laptops. The best thing to do should be to measure the size of your laptop or notebook, which means that you can then buy the proper sized leather laptop bags for men.
When people decide to purchase their leather laptop bags, they would not only tent to choose the standard black color, but also other various colors choice such as red, blue, pink, white, orange and green on the market. Moreover, other different designs of this kind of leather laptop bags are available for your option, like your favorite football or baseball team. You may be given a La Folie laptop bag with logos of their companies placed on as a complementary gift or promotional present when you buy your laptop. The leather laptop bags on the market are available at very reasonable prices, but some made by the designers are very expensive. If you want to buy an affordable la Folie laptop bag, online shopping is a good idea where you can usually acquire them at the discounted prices cheap jerseys.
Sunday, January 20, 2013
The Development of LED Display in China
The Growth of LED Display in China
CREE has a plan to shift the focus to the Chinese LED industry, the company in 2010 to about $167000000 in investment the majority will use in china. China and Asia LED market growth, is the foreign enterprise growth to gain maximum power. In fiscal 2010, CREE Asia market revenue accounts for its total revenue of about 2/3, the Chinese mainland and Hong Kong area's revenue growth up to 100%.
The High Quality of LED Display
The more concentrated in the downstream industry chain, with LED chip production capacity of only 62 companies, even with large packaging capacity of enterprises, the layout of industry chain upstream but also hundreds of LED's profit in the industry chain of weight distribution, LED epitaxial wafer and chip accounted for about 70%, LED package accounted for about 10%~20%, LED application probably accounted for 10%~20%. urrently the only LED lighting enterprises have three thousand or four thousand, breed covers home furnishing, lighting, led display curtain, electrical and other fields. With the foreign capital giant high quality performance increase compared to Chinese enterprises, there is a huge Legion "outwardly strong but inwardly weak". CBut
Chinese Large LED Display Enterprises
The government does promote LED industry spare no effort at the beginning of 2009, Ministry of science and technology to launch "ten city lights" semiconductor lighting demonstration city plan, covering Beijing, Shenzhen and other 21 domestic developed city; local government joined them, such as the Dongguan City Hall of the LED industry as the "emerging industries of strategic importance and into Dongguan." "five multiplication" (five years the output value doubled) program. Someone has strongly pointed out, has just listed on the domestic LED enterprise according to the growth rate of dry photoelectric bright is benefited from government subsidies, 2007 to 2009, it received government subsidies of 1800000 yuan respectively, 8688600 yuan, 37120400 yuan. According to the insiders, Chinese LED enterprises in technology with Europe and the United States on the top companies have 3~5 years gap. Many LED enterprises are relying on government subsidies to complete the profit growth. The Government support has led to the current domestic application is the government procurement, not really into civilian areas, so the market demand is very small. The large led display is therefore increasing Chinese LED enterprise legion, one side is the core technology of heteronomy. The liquid crystal display industry in China is so similar! The national development and Reform Commission issued industry guidance, ask to 2015, domestic market share reached 70%.Hope the government to help Chinese enterprises to eliminate the shadow behind LED flourishing, on such a huge industry, should be the best way to.
This article come from:http://www.storage-battery.com/index.php/smart-electrified-wire-netting-construction-will-bring-trillions-opportunities.htm
CREE has a plan to shift the focus to the Chinese LED industry, the company in 2010 to about $167000000 in investment the majority will use in china. China and Asia LED market growth, is the foreign enterprise growth to gain maximum power. In fiscal 2010, CREE Asia market revenue accounts for its total revenue of about 2/3, the Chinese mainland and Hong Kong area's revenue growth up to 100%.
The High Quality of LED Display
The more concentrated in the downstream industry chain, with LED chip production capacity of only 62 companies, even with large packaging capacity of enterprises, the layout of industry chain upstream but also hundreds of LED's profit in the industry chain of weight distribution, LED epitaxial wafer and chip accounted for about 70%, LED package accounted for about 10%~20%, LED application probably accounted for 10%~20%. urrently the only LED lighting enterprises have three thousand or four thousand, breed covers home furnishing, lighting, led display curtain, electrical and other fields. With the foreign capital giant high quality performance increase compared to Chinese enterprises, there is a huge Legion "outwardly strong but inwardly weak". CBut
Chinese Large LED Display Enterprises
The government does promote LED industry spare no effort at the beginning of 2009, Ministry of science and technology to launch "ten city lights" semiconductor lighting demonstration city plan, covering Beijing, Shenzhen and other 21 domestic developed city; local government joined them, such as the Dongguan City Hall of the LED industry as the "emerging industries of strategic importance and into Dongguan." "five multiplication" (five years the output value doubled) program. Someone has strongly pointed out, has just listed on the domestic LED enterprise according to the growth rate of dry photoelectric bright is benefited from government subsidies, 2007 to 2009, it received government subsidies of 1800000 yuan respectively, 8688600 yuan, 37120400 yuan. According to the insiders, Chinese LED enterprises in technology with Europe and the United States on the top companies have 3~5 years gap. Many LED enterprises are relying on government subsidies to complete the profit growth. The Government support has led to the current domestic application is the government procurement, not really into civilian areas, so the market demand is very small. The large led display is therefore increasing Chinese LED enterprise legion, one side is the core technology of heteronomy. The liquid crystal display industry in China is so similar! The national development and Reform Commission issued industry guidance, ask to 2015, domestic market share reached 70%.Hope the government to help Chinese enterprises to eliminate the shadow behind LED flourishing, on such a huge industry, should be the best way to.
This article come from:http://www.storage-battery.com/index.php/smart-electrified-wire-netting-construction-will-bring-trillions-opportunities.htm
Introduction of Fire Emergency Lighting
Fire Emergency Exit Lights
Emergency lighting is a kind of lighting fixture when the normal lighting power failures, and it can effectively lighting and display the evacuation routes or provide continuous lighting and uninterrupted work. It is widely used in public places and the places that need intermittent lighting. Fire emergency exit lights is applicable to fire emergency lighting, and it is the most common kind of fire emergency lighting, it has long emergency time and high brightness with power emergency functions. Fire emergency lighting has the features of small power consumption, high brightness and long service life, there is power switch on the edge of the design, and refers to the remarkable lights. It is suitable for factories, hotels, schools, units and other public places to prepare for power outages for emergency lighting purposes. The emergency exit light is made of f industrial plastic and high brightness light bulb, the color is mainly white, there are two arrows on the surface, the material is not aging, fast heat dissipation and strong impact resistance and other characteristics. Fire emergency exit lighting can be wall-mounted, portable and hanging installation.
Emergency Lighting Category
Emergency lighting can be classified according to work status and functions. By the work of the state it can be divided into three categories: continuous emergency lights. Regardless of whether the failure of the normal lighting power, it can continue to provide lighting; discontinued emergency lights. It works only when normal lighting power failures. Composite emergency lights. Lamp emergency lighting contains two or more light sources, and there is at least a normal lighting power works after the normal lighting failures. According to functions it can be divided into two categories: emergency exit signs lamps: it can clearly indicate the exit, emergency lighting and channel direction, there is text and icons on the lights, the flag surface brightness is 7 ~ 10cd/m2 and text strokes roughness is at least 19mm and the height is at least 150mm; lighting type lamps: in the event of an accident, it can provide necessary illumination to the aisle, exit routes, stairs and the potential danger zone.
v The Composition of Emergency Lighting
Emergency lighting is composed of the light source, the battery (or batteries), light body and electrical parts. It adopts gas discharge light sources such as fluorescent emergency lights also include the converter and its ballast device. Battery should be chosen to meet the following requirements: use incandescent discharge time of not less than 20 minutes, and the use of fluorescent lamps and discharge time less than 30 minutes; the emergency lights with small installation volume should use the nickel-cadmium battery or lead-acid battery, and the lights with a relatively long discharge time may use the large capacity open type batteries. Electrical components including DC and AC converter, the toggle switch to detect circuit performance and ballast components.
Emergency lighting is a kind of lighting fixture when the normal lighting power failures, and it can effectively lighting and display the evacuation routes or provide continuous lighting and uninterrupted work. It is widely used in public places and the places that need intermittent lighting. Fire emergency exit lights is applicable to fire emergency lighting, and it is the most common kind of fire emergency lighting, it has long emergency time and high brightness with power emergency functions. Fire emergency lighting has the features of small power consumption, high brightness and long service life, there is power switch on the edge of the design, and refers to the remarkable lights. It is suitable for factories, hotels, schools, units and other public places to prepare for power outages for emergency lighting purposes. The emergency exit light is made of f industrial plastic and high brightness light bulb, the color is mainly white, there are two arrows on the surface, the material is not aging, fast heat dissipation and strong impact resistance and other characteristics. Fire emergency exit lighting can be wall-mounted, portable and hanging installation.
Emergency Lighting Category
Emergency lighting can be classified according to work status and functions. By the work of the state it can be divided into three categories: continuous emergency lights. Regardless of whether the failure of the normal lighting power, it can continue to provide lighting; discontinued emergency lights. It works only when normal lighting power failures. Composite emergency lights. Lamp emergency lighting contains two or more light sources, and there is at least a normal lighting power works after the normal lighting failures. According to functions it can be divided into two categories: emergency exit signs lamps: it can clearly indicate the exit, emergency lighting and channel direction, there is text and icons on the lights, the flag surface brightness is 7 ~ 10cd/m2 and text strokes roughness is at least 19mm and the height is at least 150mm; lighting type lamps: in the event of an accident, it can provide necessary illumination to the aisle, exit routes, stairs and the potential danger zone.
v The Composition of Emergency Lighting
Emergency lighting is composed of the light source, the battery (or batteries), light body and electrical parts. It adopts gas discharge light sources such as fluorescent emergency lights also include the converter and its ballast device. Battery should be chosen to meet the following requirements: use incandescent discharge time of not less than 20 minutes, and the use of fluorescent lamps and discharge time less than 30 minutes; the emergency lights with small installation volume should use the nickel-cadmium battery or lead-acid battery, and the lights with a relatively long discharge time may use the large capacity open type batteries. Electrical components including DC and AC converter, the toggle switch to detect circuit performance and ballast components.
Wednesday, January 16, 2013
Safe and Correct Use of Kitchen Refrigerator
Difference between Commercial Refrigerator and household Refrigerator
The difference between commercial refrigerator and home refrigerator is very great. Generally, the power of commercial refrigerator is required to be much larger than the household ones, so the general household voltage cannot support some commercial refrigerators. If improper use, it is very likely to result in safety hazards. There are many types of commercial grade refrigerator, but they are mainly used to assist commercial use, and the prolonged use of the refrigerator will more or less have some problems. For example, after a short time use of the refrigerator, the refrigerator compartment is end up with a thick layer of cream, then how to deal with it? If the freezing chamber of the refrigerator frost layer is too thick, it will affect the normal use.
Installation and Use of Commercial Refrigerator
The commercial kitchen refrigerator should be placed in a low temperature place. Because the temperature is too low, then it will be hard to start the compressor, so the room refrigeration cannot be overcome, refrigerator temperature compensation switch can be opened. The refrigerator problem generally does not need a regulator. If the user's home power fluctuations are too great, then you can use the regulator. The refrigerator regulator power should not be less than 400W. Refrigerator press will produce induction at work, if there is no ground wire, cabinet experience charged. Therefore freezer must have a ground wire. The freezer should be retrofitted ground wire. Ground wire ground wire is set, you cannot do with tap water and gas pipes, and more cannot be received on the telephone line and the lightning rod. Also to be noted is in the gas stations and other businesses near the freezer, remember to use the external unit connected to the indoor freezer external drive compressor is installed outdoors, with brass, the process will certainly require welding, as sparks appear, this is very dangerous.
Proper Use of Kitchen Refrigerator if Power-Off
Now most of the kitchen refrigerator in the market mostly uses the smart thermostat control to adjust the temperature, so the temperature accuracy is quite high, and we all know the food inside the refrigerator will change with the changes outside temperature and that when we suddenly experience a power outage then the refrigerator stop working and how to do with it? If the kitchen refrigerator is blackout then the power protection automatically power off 5-8 minutes or longer reach to meet the requirements and refrigerator protection. If the kitchen refrigerator installation of the instantaneous has no power protection then refrigerator, refrigerator plug socket and power need to maintain good contact.
This article come from:http://www.soundspeakers.cn/index.php/safe-and-correct-use-of-kitchen-refrigerator.htm
The difference between commercial refrigerator and home refrigerator is very great. Generally, the power of commercial refrigerator is required to be much larger than the household ones, so the general household voltage cannot support some commercial refrigerators. If improper use, it is very likely to result in safety hazards. There are many types of commercial grade refrigerator, but they are mainly used to assist commercial use, and the prolonged use of the refrigerator will more or less have some problems. For example, after a short time use of the refrigerator, the refrigerator compartment is end up with a thick layer of cream, then how to deal with it? If the freezing chamber of the refrigerator frost layer is too thick, it will affect the normal use.
Installation and Use of Commercial Refrigerator
The commercial kitchen refrigerator should be placed in a low temperature place. Because the temperature is too low, then it will be hard to start the compressor, so the room refrigeration cannot be overcome, refrigerator temperature compensation switch can be opened. The refrigerator problem generally does not need a regulator. If the user's home power fluctuations are too great, then you can use the regulator. The refrigerator regulator power should not be less than 400W. Refrigerator press will produce induction at work, if there is no ground wire, cabinet experience charged. Therefore freezer must have a ground wire. The freezer should be retrofitted ground wire. Ground wire ground wire is set, you cannot do with tap water and gas pipes, and more cannot be received on the telephone line and the lightning rod. Also to be noted is in the gas stations and other businesses near the freezer, remember to use the external unit connected to the indoor freezer external drive compressor is installed outdoors, with brass, the process will certainly require welding, as sparks appear, this is very dangerous.
Proper Use of Kitchen Refrigerator if Power-Off
Now most of the kitchen refrigerator in the market mostly uses the smart thermostat control to adjust the temperature, so the temperature accuracy is quite high, and we all know the food inside the refrigerator will change with the changes outside temperature and that when we suddenly experience a power outage then the refrigerator stop working and how to do with it? If the kitchen refrigerator is blackout then the power protection automatically power off 5-8 minutes or longer reach to meet the requirements and refrigerator protection. If the kitchen refrigerator installation of the instantaneous has no power protection then refrigerator, refrigerator plug socket and power need to maintain good contact.
This article come from:http://www.soundspeakers.cn/index.php/safe-and-correct-use-of-kitchen-refrigerator.htm
Tuesday, January 15, 2013
LED Lights in Different Festivals
Commercial LED String Lights
In nowadays, commercial led string lights have come into thousands of households, but its market at the present stage is not mature enough. Different manufacturers have different standards. And the national LED lighting standard has not been published, so it should also restricts the healthy development of LED lighting market. We can find that LED lights are used in everywhere as their small size and convenience of using, so commercial led string lights are popular by the large numbers of consumers. There are many advantages of LED lights, for example, the light source of high luminous efficiency, the less power consumption, the longer service life, high safety and reliability, is beneficial to environmental protection, energy saving.
LED Lights Used in Festivals
LED lighting contains no any toxin, so they can prevent from bugs. In nowadays, led lights have also come into thousands of families to celebrate different festivals. The small bulbs will not generate much heat, so they are cool for touching. They won't cause radio frequency waves, so they don't disturb radios or television broadcasts. They are also usually widely used in directional lighting rather than room lighting, although some changes in design may improve this situation. They can also prevent the products from being hurt by vibrations and shocks.There are also disadvantages to LED lighting, too. LED lights are very expensive to buy. The commercial led christmas lights can be used in Christmas to build a good atmosphere. They are heat sensitive so that if they are not used in a steady and consistent current, they will stop working or fade quicker. LEDs are often used in clocks and watches and as indicator lights in cars. They have fast switching, so they are good in remote controls and lights that are turned on and off frequently. Their directional nature means they are best used under kitchen counters, in stairways and hallways, or as reading lamps, landscape lighting, and night lights.LED lighting comes in many forms, including screw-in light bulbs, flashlights, strips or clusters. They are as simple to install as other types of lighting and can be found where consumers buy other bulbs and lights.
The Advantages of LED Lights
There are many advantages of LED lights, for example, the light source of high luminous efficiency, the less power consumption, the longer service life, high safety and reliability, is beneficial to environmental protection, energy saving.We can find that LED lights are used in everywhere as their small size and convenience of using, so they are popular by the large numbers of consumers.
This article come from:http://cell.battery-products.com/commercial-led-christmas-lights/led-lights-in-different-festivals.htm
In nowadays, commercial led string lights have come into thousands of households, but its market at the present stage is not mature enough. Different manufacturers have different standards. And the national LED lighting standard has not been published, so it should also restricts the healthy development of LED lighting market. We can find that LED lights are used in everywhere as their small size and convenience of using, so commercial led string lights are popular by the large numbers of consumers. There are many advantages of LED lights, for example, the light source of high luminous efficiency, the less power consumption, the longer service life, high safety and reliability, is beneficial to environmental protection, energy saving.
LED Lights Used in Festivals
LED lighting contains no any toxin, so they can prevent from bugs. In nowadays, led lights have also come into thousands of families to celebrate different festivals. The small bulbs will not generate much heat, so they are cool for touching. They won't cause radio frequency waves, so they don't disturb radios or television broadcasts. They are also usually widely used in directional lighting rather than room lighting, although some changes in design may improve this situation. They can also prevent the products from being hurt by vibrations and shocks.There are also disadvantages to LED lighting, too. LED lights are very expensive to buy. The commercial led christmas lights can be used in Christmas to build a good atmosphere. They are heat sensitive so that if they are not used in a steady and consistent current, they will stop working or fade quicker. LEDs are often used in clocks and watches and as indicator lights in cars. They have fast switching, so they are good in remote controls and lights that are turned on and off frequently. Their directional nature means they are best used under kitchen counters, in stairways and hallways, or as reading lamps, landscape lighting, and night lights.LED lighting comes in many forms, including screw-in light bulbs, flashlights, strips or clusters. They are as simple to install as other types of lighting and can be found where consumers buy other bulbs and lights.
The Advantages of LED Lights
There are many advantages of LED lights, for example, the light source of high luminous efficiency, the less power consumption, the longer service life, high safety and reliability, is beneficial to environmental protection, energy saving.We can find that LED lights are used in everywhere as their small size and convenience of using, so they are popular by the large numbers of consumers.
This article come from:http://cell.battery-products.com/commercial-led-christmas-lights/led-lights-in-different-festivals.htm
Monday, January 14, 2013
China LED displays,outdoor lighting supply
LED Display Market Prospects
LED display uses the low-voltage scan driver, and it has the advantages of low power consumption, long life, low cost, high brightness, large viewing angle, viewing distance, waterproof, and various specifications varieties, it can meet the various needs of different application scenarios and the development prospects are very bright. It is widely regarded as the most potential for growth is the development of the fastest LED application market. China LED displays market size is about 100 billion in 2008. And with the organization of the Beijing Olympic Games, Shanghai World Expo and Guangzhou Asian Games and other major competitions, the widely used of display in stadiums, airports, railway stations, banks, hospitals, public squares, commercial establishments and residential communities, the LED display market application space is expanding. In addition, the erected large LED display screen every 10 years experienced a replacement wave. With the improvement of people's living standard, outdoor LED display will gradually use in various industries.
Characteristics of the LED Displays
Compared with the other large-screen terminals of outdoor lighting supply, LED display mainly has the following characteristics: high brightness: Outdoor LED display brightness is greater than 8000mcd/m2, is currently the only weather use outdoors large display terminal; Indoor LED: the display brightness is greater than 2000md/m2. Long life: LED life is up to 100,000 hours (10 years) or more, the parameters generally refers to the design life of the brightness of dark count; perspective the indoor viewing angle is greater than 160 degrees and the outdoor viewing angle is greater than 120 degrees. The size of the viewing angle depends on the shape of the LED light-emitting diode. The screen area is big or small, as small as less than one square meter, up to hundreds of thousands of square meters; has easy access to computer interface and rich software support.
LED Display Classifications
LED display classification is various, and it can be broadly classified in accordance with the following ways: According to the use the environment, it can be divided into indoor, outdoor and semi-outdoor display: the surface area of indoor display screen is generally small and high in point density and it is used in direct sunlight or lighting environment, the viewing distance is a few meters away, screen body does not have the waterproof seal capacity. Large outdoor display has larger screen surface area, point density is dilute, it can be used in direct sunlight conditions, and the screen has good wind resistance to rain and lightning. The semi-outdoor display ranges between outdoor and indoor display screen, it has higher luminance seal and can be used under direct sunlight, screen body has certain density, and it is usually used in the roof or windows.
LED display uses the low-voltage scan driver, and it has the advantages of low power consumption, long life, low cost, high brightness, large viewing angle, viewing distance, waterproof, and various specifications varieties, it can meet the various needs of different application scenarios and the development prospects are very bright. It is widely regarded as the most potential for growth is the development of the fastest LED application market. China LED displays market size is about 100 billion in 2008. And with the organization of the Beijing Olympic Games, Shanghai World Expo and Guangzhou Asian Games and other major competitions, the widely used of display in stadiums, airports, railway stations, banks, hospitals, public squares, commercial establishments and residential communities, the LED display market application space is expanding. In addition, the erected large LED display screen every 10 years experienced a replacement wave. With the improvement of people's living standard, outdoor LED display will gradually use in various industries.
Characteristics of the LED Displays
Compared with the other large-screen terminals of outdoor lighting supply, LED display mainly has the following characteristics: high brightness: Outdoor LED display brightness is greater than 8000mcd/m2, is currently the only weather use outdoors large display terminal; Indoor LED: the display brightness is greater than 2000md/m2. Long life: LED life is up to 100,000 hours (10 years) or more, the parameters generally refers to the design life of the brightness of dark count; perspective the indoor viewing angle is greater than 160 degrees and the outdoor viewing angle is greater than 120 degrees. The size of the viewing angle depends on the shape of the LED light-emitting diode. The screen area is big or small, as small as less than one square meter, up to hundreds of thousands of square meters; has easy access to computer interface and rich software support.
LED Display Classifications
LED display classification is various, and it can be broadly classified in accordance with the following ways: According to the use the environment, it can be divided into indoor, outdoor and semi-outdoor display: the surface area of indoor display screen is generally small and high in point density and it is used in direct sunlight or lighting environment, the viewing distance is a few meters away, screen body does not have the waterproof seal capacity. Large outdoor display has larger screen surface area, point density is dilute, it can be used in direct sunlight conditions, and the screen has good wind resistance to rain and lightning. The semi-outdoor display ranges between outdoor and indoor display screen, it has higher luminance seal and can be used under direct sunlight, screen body has certain density, and it is usually used in the roof or windows.
China's Range Hood Industry Development Status and Future
Range Hood Industry Development Status in China
Chinese range hood industry maintains stable production growth after the financial crisis, the domestic production of range hoods in 2010 has returned to a more rapid growth from January to August this year, the total production reached 11.69 million units, a year-on-year growth rate of 27.7%; domestic range hoods market scale is expanding steadily in recent years and it maintained a fast growth rate, the expected annual growth rate in 2010 may exceed 20%; the range hood exports tends to rise after the decline in 2008 and the range hood exports in 2009 maintained a stable growth; range hood market structure analysis Class structure look at the comparison of the data from the past few years, the flat top cover and deep structure accounted show a downward trend near-priming maintained rapid growth; range hood retail price Overall, the retail price of the range hood maintains a steady rise, but people that want to .htmbuy range hooda are more care about this, so this is not a very good thing.
Range Hood Industry's Future Development
After nearly 30 years of development, wall mount range hooda products have become the kitchen renovated necessities, it has more and more becomes the most important and place that can best embody the design in kitchen renovation. Range hood industry also has become a more mature industry. Range hood industry is facing a rare opportunity, but also faces enormous challenges. Opportunities faced the macroeconomic environment in China is getting better and better, and create a favorable external environment for the development of the industry of the range hood. China's economy has maintained a stable growth the economy maintains 8% growth in 2010 is not a problem, and the future of China's economy will continue to maintain a growing momentum. Keep booming of real estate industry will maintain a healthier and sustainable development under the national macro-control policies. National policy to stimulate the consumption of home appliances can further promote the development of the range hood industry, such as home appliances to the countryside.
Challenges for Range Hood Industry
There are many uncertain factors in China's external economic environment. The foundation of the world economic recovery is still fragile, and financial risks have not completely eliminated, countries stimulus opting out is difficult. And the global economic integration and the turmoil in the world economy are likely to cause fluctuations in the Chinese economy. Faced with the pressure of the appreciation of the RMB, large domestic inflation, expensive raw materials and rising labor costs, there is great pressure on the cost of the product. Facing the fierce competition, part of the brand will be phased out. The degree of industry brand concentration is low.
This article come from:http://www.kitchencabinet8.com/index.php/chinas-range-hood-industry-development-status-and-future.htm
Chinese range hood industry maintains stable production growth after the financial crisis, the domestic production of range hoods in 2010 has returned to a more rapid growth from January to August this year, the total production reached 11.69 million units, a year-on-year growth rate of 27.7%; domestic range hoods market scale is expanding steadily in recent years and it maintained a fast growth rate, the expected annual growth rate in 2010 may exceed 20%; the range hood exports tends to rise after the decline in 2008 and the range hood exports in 2009 maintained a stable growth; range hood market structure analysis Class structure look at the comparison of the data from the past few years, the flat top cover and deep structure accounted show a downward trend near-priming maintained rapid growth; range hood retail price Overall, the retail price of the range hood maintains a steady rise, but people that want to .htmbuy range hooda are more care about this, so this is not a very good thing.
Range Hood Industry's Future Development
After nearly 30 years of development, wall mount range hooda products have become the kitchen renovated necessities, it has more and more becomes the most important and place that can best embody the design in kitchen renovation. Range hood industry also has become a more mature industry. Range hood industry is facing a rare opportunity, but also faces enormous challenges. Opportunities faced the macroeconomic environment in China is getting better and better, and create a favorable external environment for the development of the industry of the range hood. China's economy has maintained a stable growth the economy maintains 8% growth in 2010 is not a problem, and the future of China's economy will continue to maintain a growing momentum. Keep booming of real estate industry will maintain a healthier and sustainable development under the national macro-control policies. National policy to stimulate the consumption of home appliances can further promote the development of the range hood industry, such as home appliances to the countryside.
Challenges for Range Hood Industry
There are many uncertain factors in China's external economic environment. The foundation of the world economic recovery is still fragile, and financial risks have not completely eliminated, countries stimulus opting out is difficult. And the global economic integration and the turmoil in the world economy are likely to cause fluctuations in the Chinese economy. Faced with the pressure of the appreciation of the RMB, large domestic inflation, expensive raw materials and rising labor costs, there is great pressure on the cost of the product. Facing the fierce competition, part of the brand will be phased out. The degree of industry brand concentration is low.
This article come from:http://www.kitchencabinet8.com/index.php/chinas-range-hood-industry-development-status-and-future.htm
Sunday, January 13, 2013
The furniture warranty latent rules _ furniture consumption
In fact, due to the strength of the manufacturers, not only the maintenance of years, even the service project home business is very different from the home appliance industry. For example, household electrical appliance enterprises are often set up in major cities across the country dedicated distribution centers and repair outlets accept the Genius, the manufacturer or its authorized service points will provide uniform standards of service, and in the home industry, except for a small scale the enterprises nationwide sales and service network, many enterprises basically can not do.
Five sigh: door-to-door time within the foreseeable future
Many home business-to-consumer warranty requirements, such as at the latest when the reply, when home maintenance and so there is no clear provisions. During the interview, many consumers reflected warranty Tel either delay no answer, either for a very long telephone recording people bother to listen, or hit the phone several times and are no arrangements for the master home repair, people warranty lose confidence. <p>
Six sigh: role model effect is not obvious
Of course, the furniture industry maintenance services highlights, relatively well known brand businesses to provide warranty service, as the relevant person in charge of the federal home that their products will provide about 3 years of warranty service and lifelong maintenance service, solid wood furniture brands --- wood · Woodland warranty period as long as 10 years.
Professional sofa brand --- Stephanie Roland, a range of after-sales service and age of the provisions was particularly thin, clear sofa inside the box 5 year warranty the car line seam line warranty for 10 years. Custom cabinet products, after-sales service is generally good, free warranty period of multi-brand cabinets in 2-3 years, many companies have a lifetime maintenance services. The well-known brands such as Europe and other warranty period of 5 years, the only charge tolls, material costs, production cost is in need of repair after the warranty expires.
Five sigh: door-to-door time within the foreseeable future
Many home business-to-consumer warranty requirements, such as at the latest when the reply, when home maintenance and so there is no clear provisions. During the interview, many consumers reflected warranty Tel either delay no answer, either for a very long telephone recording people bother to listen, or hit the phone several times and are no arrangements for the master home repair, people warranty lose confidence. <p>
Six sigh: role model effect is not obvious
Of course, the furniture industry maintenance services highlights, relatively well known brand businesses to provide warranty service, as the relevant person in charge of the federal home that their products will provide about 3 years of warranty service and lifelong maintenance service, solid wood furniture brands --- wood · Woodland warranty period as long as 10 years.
Professional sofa brand --- Stephanie Roland, a range of after-sales service and age of the provisions was particularly thin, clear sofa inside the box 5 year warranty the car line seam line warranty for 10 years. Custom cabinet products, after-sales service is generally good, free warranty period of multi-brand cabinets in 2-3 years, many companies have a lifetime maintenance services. The well-known brands such as Europe and other warranty period of 5 years, the only charge tolls, material costs, production cost is in need of repair after the warranty expires.
Do you Know LED Driver?
LED Driver Features
According to the characteristics of grid electricity rules and LED driver power supply requirements, the selection and design of the LED drive power should be tooken into account the followings: First, high reliability: especially like the drive power of LED street lamp, it is mounted at a height place and inconvenient for repairs and maintenance. Second, high efficiency: Since LED is energy-saving products, so ac led driver efficiency should be higher. For the structure of power installed in the fixture, is particularly important. LED luminous efficiency decreases with the rise of the temperature of the LED, the LED heat is very important. Power, high efficiency, small power depletion, heat small fixture lamps will reduce the temperature rise. It is beneficial to delay the LED light failure. Third, high power factor: The power factor is the grid load requirements. Generally, it is less than 70 watts of electrical appliances, and there is no mandatory target.
LED Driver Principle
The curve of the forward voltage drop (VF) and the forward current (IF), we can know from the curves, when the forward voltage exceeds a threshold value (about 2V), i.e. commonly referred to as the conduction voltage can approximate that, IF is proportional with VF. LED's optical properties are usually described as a function of current, and rather than a function of voltage, flux (φV) and IF curve, therefore, constant current driver can better control the brightness. In addition, LED's forward voltage drop range is relatively large (up to 1V above), VF-IF curve of the figure as above shows, small changes of VF will lead to a larger, IF changes, which led to the brightness of the more big change. So, using a constant voltage source drive cannot guarantee the consistency of the LED brightness, and the impact of reliability, lifetime and lumen maintenance of the LED. Therefore, ultra-bright LED usually uses co
LED Driver Requirements
LED driving circuit, in addition to meet safety requirements, the additional basic functions should be two aspects: First, as far as possible to maintain the constant current characteristic, especially when the power supply voltage is ± 15% of the changes, and should be able to maintain the output current at ± 10 constant current drive change.% range with LED as a display or lighting equipment or backlight when you need them, and the main reason is: avoid the drive current to exceed the maximum rating, to affect its reliability. Second, to obtain the expected brightness requirements, and to ensure that the individual LED brightness, and color consistency. The second driver circuit should be kept lower power consumption, so as to make the LED system efficiency maintain at a high level.
This article come from:http://www.mobilesaccessories.net/index.php/do-you-know-led-driver.htm
According to the characteristics of grid electricity rules and LED driver power supply requirements, the selection and design of the LED drive power should be tooken into account the followings: First, high reliability: especially like the drive power of LED street lamp, it is mounted at a height place and inconvenient for repairs and maintenance. Second, high efficiency: Since LED is energy-saving products, so ac led driver efficiency should be higher. For the structure of power installed in the fixture, is particularly important. LED luminous efficiency decreases with the rise of the temperature of the LED, the LED heat is very important. Power, high efficiency, small power depletion, heat small fixture lamps will reduce the temperature rise. It is beneficial to delay the LED light failure. Third, high power factor: The power factor is the grid load requirements. Generally, it is less than 70 watts of electrical appliances, and there is no mandatory target.
LED Driver Principle
The curve of the forward voltage drop (VF) and the forward current (IF), we can know from the curves, when the forward voltage exceeds a threshold value (about 2V), i.e. commonly referred to as the conduction voltage can approximate that, IF is proportional with VF. LED's optical properties are usually described as a function of current, and rather than a function of voltage, flux (φV) and IF curve, therefore, constant current driver can better control the brightness. In addition, LED's forward voltage drop range is relatively large (up to 1V above), VF-IF curve of the figure as above shows, small changes of VF will lead to a larger, IF changes, which led to the brightness of the more big change. So, using a constant voltage source drive cannot guarantee the consistency of the LED brightness, and the impact of reliability, lifetime and lumen maintenance of the LED. Therefore, ultra-bright LED usually uses co
LED Driver Requirements
LED driving circuit, in addition to meet safety requirements, the additional basic functions should be two aspects: First, as far as possible to maintain the constant current characteristic, especially when the power supply voltage is ± 15% of the changes, and should be able to maintain the output current at ± 10 constant current drive change.% range with LED as a display or lighting equipment or backlight when you need them, and the main reason is: avoid the drive current to exceed the maximum rating, to affect its reliability. Second, to obtain the expected brightness requirements, and to ensure that the individual LED brightness, and color consistency. The second driver circuit should be kept lower power consumption, so as to make the LED system efficiency maintain at a high level.
This article come from:http://www.mobilesaccessories.net/index.php/do-you-know-led-driver.htm
Wednesday, January 9, 2013
Overall wardrobe of raw materials!
A plate - Show advertisement code begin - Advertisement code end The
The plate is the main constituent materials of the whole wardrobe, it directly determines the level of product quality. The wardrobe sheet on the market based panels, solid wood. Wood-based panels are divided into plywood, particle board, fiberboard. Which fiberboard there are high-density, medium-density, low-density points.
HDF: wood fiber or other plant fiber as raw material, cooking ground into tiny fibers by adding an appropriate amount of adhesive repression under certain temperature and pressure. High density, high strength. High density board has become the main material of the majority of the closet manufacturers.
2, particle board: saying "particleboard, wood processed into fine particles of wood shavings and adding an appropriate amount of glue and pressed in a certain temperature and pressure. The high density of low-intensity.
3, melamine board: melamine impregnated paper directly put pressure on the particleboard and MDF. This sheet is divided into two levels E1 level and E2 levels.
Various Shooting Activities and Shooting Targets in History
Origin of Shooting & Shooting Target
According to historical records, the shooting sport originated in the hunting and military activities. In the 15th century, Switzerland has hosted matchlock shooting competitions. 500 years ago, Scandinavia is on the rise of a running deer shooting game activities. In the early 19th century, some European countries also held a live pigeon shooting game, and these are modern prototype of shooting competitions. Before the first modern Olympic Games in 1896, many European countries have set up Shooting Association and other organizations, and have been held in shooting competitions. The First World Shooting Championships were held in 1897. The International Shooting Sports Federation was established in 1907, formerly known as the National Shooting Federation and the Association of International Union. In July 15, 1998, it is officially named as the International Shooting Sports Federation, referred to as the ISSF. The earliest shooting target is electronic shooting target.
Rifle Shooting and Shooting Target
Rifle shooting is the slow shot nature project, shooting targets are small, and precision is high, and the game lasts for a long time, the competition rules only limits shooting time, no single time requirements, the targets are metal shooting targets; shooter in shooting asymmetry, the unnatural posture structural conditions, still coordinating force; striker repeat the same set of actions throughout the shooting process, each gun, and highly concentrated in the energy, the mood is in a very tense state, maintain the height of the action, it is a skill highly competitive sports. All the bullets are launched from a distance of ten meters (33 feet). The most commonly used a target for AR-5/10 or AR-5/1. AR-5/1 target on paper is only a black target circle (BULL BULLSEYE). Each contestant is given sixty this target paper used to record the achievements of sixty guns. This target paper is only for equipment change target shooting range. AR-5/10 target paper ten records in the target circle, and two calibration target circle. AR-5/10 target sheet for shooting range does not change the target system. This target paper, usually every time hangs two to record the results of the 20 rounds. Another air rifle gun targets are the air rifle targets. We also understand that a lot from Olympics.
v
Moving target Shooting
The 1900 Paris Olympic Games began to set moving target project, use a large caliber rifle at a distance of 100 meters running deer target shooting. Deer target within 4 seconds passes through 23 meters of open ground. Single shot 50 times and 25 times double shooting two projects. It has been carried out to the early 1970s. The early 1960s, the World Championships begin additional use of the 50-meter mobile field targets small-bore rifle shooting. There have been trot deer, the running deer ran roe deer butt volatile. It is stereotyped as wild boar target from 1965 onwards. The 1980 ISSF additional 10m running target air rifle in two meters of open ground running trot pig target shooting. Since January 1, 1989, in turn trot the pig target instead the two bull's-eye and a circular black spots painted black heart ring target.
www.metaltarget.com is a professional hardware manufacturer in Foshan China. The main products are various types of metal targets, has OEM Germany, Norway and Taiwan sports brands. For further information, come visit the website! This article come from:http://www.chinahotelsupply.com.cn/index.php/various-shooting-activities-and-shooting-targets-in-history.htm
According to historical records, the shooting sport originated in the hunting and military activities. In the 15th century, Switzerland has hosted matchlock shooting competitions. 500 years ago, Scandinavia is on the rise of a running deer shooting game activities. In the early 19th century, some European countries also held a live pigeon shooting game, and these are modern prototype of shooting competitions. Before the first modern Olympic Games in 1896, many European countries have set up Shooting Association and other organizations, and have been held in shooting competitions. The First World Shooting Championships were held in 1897. The International Shooting Sports Federation was established in 1907, formerly known as the National Shooting Federation and the Association of International Union. In July 15, 1998, it is officially named as the International Shooting Sports Federation, referred to as the ISSF. The earliest shooting target is electronic shooting target.
Rifle Shooting and Shooting Target
Rifle shooting is the slow shot nature project, shooting targets are small, and precision is high, and the game lasts for a long time, the competition rules only limits shooting time, no single time requirements, the targets are metal shooting targets; shooter in shooting asymmetry, the unnatural posture structural conditions, still coordinating force; striker repeat the same set of actions throughout the shooting process, each gun, and highly concentrated in the energy, the mood is in a very tense state, maintain the height of the action, it is a skill highly competitive sports. All the bullets are launched from a distance of ten meters (33 feet). The most commonly used a target for AR-5/10 or AR-5/1. AR-5/1 target on paper is only a black target circle (BULL BULLSEYE). Each contestant is given sixty this target paper used to record the achievements of sixty guns. This target paper is only for equipment change target shooting range. AR-5/10 target paper ten records in the target circle, and two calibration target circle. AR-5/10 target sheet for shooting range does not change the target system. This target paper, usually every time hangs two to record the results of the 20 rounds. Another air rifle gun targets are the air rifle targets. We also understand that a lot from Olympics.
v
Moving target Shooting
The 1900 Paris Olympic Games began to set moving target project, use a large caliber rifle at a distance of 100 meters running deer target shooting. Deer target within 4 seconds passes through 23 meters of open ground. Single shot 50 times and 25 times double shooting two projects. It has been carried out to the early 1970s. The early 1960s, the World Championships begin additional use of the 50-meter mobile field targets small-bore rifle shooting. There have been trot deer, the running deer ran roe deer butt volatile. It is stereotyped as wild boar target from 1965 onwards. The 1980 ISSF additional 10m running target air rifle in two meters of open ground running trot pig target shooting. Since January 1, 1989, in turn trot the pig target instead the two bull's-eye and a circular black spots painted black heart ring target.
www.metaltarget.com is a professional hardware manufacturer in Foshan China. The main products are various types of metal targets, has OEM Germany, Norway and Taiwan sports brands. For further information, come visit the website! This article come from:http://www.chinahotelsupply.com.cn/index.php/various-shooting-activities-and-shooting-targets-in-history.htm
Tuesday, January 8, 2013
LED Lights "Force the Energy-saving Lamps to Abdicate"
Energy-saving lamp is Gradually Replaced by LED Lights
Theoretically, each of the electronic components has a certain number of switching times, frequent switching make electronic components keep startup, shutdown, and will shorten the time of use; Further, since both the location of the energy saving lamp electronic components and tubes is very close, if turned on for a long time, tube heating will also affect the service life of the electronic components. China is an energy-saving lamps producing power, and 80% of the world's energy-saving lamps is produced by China. The production of energy-saving lamps is also a high pollution, high energy consumption, and energy-saving lamps contain mercury, easier to cause environmental pollution after disposal, so many foreign countries restrict the development of this industry. In comparison, like the emerging lighting of outdoor led light bulbs , the pollution of the production process is small, the use of more energy-efficient, which is also the non-stop efforts of the lighting industry objectives and results. These potential shortcomings of the energy-saving lamps make the lighting industry keep looking for other alternatives.
Performance & Characteristics of LED Lights
The more common single grain chip of LED lights is typically 1 watt to 3 watts, high color saturation, and flexible control, centralized light source, and the greater advantage is its wattage, energy-saving effect is more pronounced. With the improvement of technology, the LED lamp power also increases. However, LED lights is still deficient, the spectrum of a single tricolor. With the increase in power, cooling issues become more prominent. Single grain chip of LED lights are rarely more than 10 watts, or the high price. However, if used as outdoor led landscape lighting, the dormitory area's street lighting, long light of the corridor, the family nightlights, etc, and LED lights are still very advantageous. If residents choose LED lights as room lighting, you can use more than one lamp fixtures, and they are beautiful and energy-saving. Compared with the traditional chandelier, most LED lights wattage is smaller, and the volume is small, the light source can be adjusted, so the use of more innovative LED lights of chandelier style is a trend.
Home Lighting Farewells "the Edison Era"
It takes more than a century for the energy-saving lamps to replace incandescent lamps, while it just takes more than 10 years for the LED lamps to keep pace with the energy-saving lamps, Since energy-saving lamps have big energy consumption, pollution and other aspects of disadvantage, the footsteps that LED lamps to replace energy-saving lamps is getting faster. The incandescent roadmap released by the state, generates effect from October 1 this year, 100 watts and above ordinary incandescent lighting is banned the sale and import. From September 1, the EU is also a comprehensive ban incandescent light bulbs and traditional incandescent bulbs to completely withdraw from the market. This means that home lighting in China also officially say farewell to the "Edison Era” that continued for 100 years.
Theoretically, each of the electronic components has a certain number of switching times, frequent switching make electronic components keep startup, shutdown, and will shorten the time of use; Further, since both the location of the energy saving lamp electronic components and tubes is very close, if turned on for a long time, tube heating will also affect the service life of the electronic components. China is an energy-saving lamps producing power, and 80% of the world's energy-saving lamps is produced by China. The production of energy-saving lamps is also a high pollution, high energy consumption, and energy-saving lamps contain mercury, easier to cause environmental pollution after disposal, so many foreign countries restrict the development of this industry. In comparison, like the emerging lighting of outdoor led light bulbs , the pollution of the production process is small, the use of more energy-efficient, which is also the non-stop efforts of the lighting industry objectives and results. These potential shortcomings of the energy-saving lamps make the lighting industry keep looking for other alternatives.
Performance & Characteristics of LED Lights
The more common single grain chip of LED lights is typically 1 watt to 3 watts, high color saturation, and flexible control, centralized light source, and the greater advantage is its wattage, energy-saving effect is more pronounced. With the improvement of technology, the LED lamp power also increases. However, LED lights is still deficient, the spectrum of a single tricolor. With the increase in power, cooling issues become more prominent. Single grain chip of LED lights are rarely more than 10 watts, or the high price. However, if used as outdoor led landscape lighting, the dormitory area's street lighting, long light of the corridor, the family nightlights, etc, and LED lights are still very advantageous. If residents choose LED lights as room lighting, you can use more than one lamp fixtures, and they are beautiful and energy-saving. Compared with the traditional chandelier, most LED lights wattage is smaller, and the volume is small, the light source can be adjusted, so the use of more innovative LED lights of chandelier style is a trend.
Home Lighting Farewells "the Edison Era"
It takes more than a century for the energy-saving lamps to replace incandescent lamps, while it just takes more than 10 years for the LED lamps to keep pace with the energy-saving lamps, Since energy-saving lamps have big energy consumption, pollution and other aspects of disadvantage, the footsteps that LED lamps to replace energy-saving lamps is getting faster. The incandescent roadmap released by the state, generates effect from October 1 this year, 100 watts and above ordinary incandescent lighting is banned the sale and import. From September 1, the EU is also a comprehensive ban incandescent light bulbs and traditional incandescent bulbs to completely withdraw from the market. This means that home lighting in China also officially say farewell to the "Edison Era” that continued for 100 years.
The Development Trend of LED Street Lights
The Status Quo of LED Lights
The development of today's LED lighting is still in the transition period, the upstream integration and technology are changing all the time, thermal and electrical in the upstream light engine module will be an important development direction. In the transition period of outdoor led light bulbs products, do not blindly seek large in lighting mold inputs, and you should consider to cooperation with the traditional lighting companies and on the basis of the mature of modular continuous development, and make efforts in the transformation of traditional lighting, and then you can achieve complementary advantages with less cost.
Analysis of LED Street Lights
The lamp shell mold cost a larger part of the LED street lighting and the investment risk is relatively high. How to reduce the funds is the issue enterprises must consider. After decades of development, traditional lighting companies have accumulated a lot of mold resources, and most of them have fine shape, excellent structure, reasonable design, and also the case of engineering applications and shell products. led street lights manufacturer can choose for these products to transform into the shell of LED street lights. Design the LED light source in accordance with its light shell, and then sell the product through traditional lighting market channel, so that both can reduce a lot of mold development costs and can take advantage of traditional lighting enterprise market resources. In addition, LED lights have many advantages, but it is still beyond the reach of today's practical application, for example, today's LED street lights, there are still many technical indicators cannot meet city road lighting design standards, such as trying to use the ultra-high-power lamps lighting at high speed, but the ultra-high-power power modern LED lamps is not stable, and because of the brightness of the high-speed driving making the super power on the road lighting development is restricted. Now LED street lights cannot replace traditional street lights on all roads, the traditional street light is still preferred in some places, which requires us to respect the traditional street lamps and seek their cooperation to solve the problem with their technology and products.
Conclusion of LED Lighting
LED lighting is a relatively young industry, especially LED street lighting, enterprises need construction, which requires a lot of resources and time. LED street lamp enterprises and traditional lighting companies face the same customers, while after decades of development and nurturing the traditional lighting market network has been mature, they can understand the needs of the owners to understand the rules and mode of operation of the market, and these are precisely lacking in a lot of LED lighting companies.
This article come from:http://cell.battery-products.com/led-products/the-development-trend-of-led-street-lights.htm
The development of today's LED lighting is still in the transition period, the upstream integration and technology are changing all the time, thermal and electrical in the upstream light engine module will be an important development direction. In the transition period of outdoor led light bulbs products, do not blindly seek large in lighting mold inputs, and you should consider to cooperation with the traditional lighting companies and on the basis of the mature of modular continuous development, and make efforts in the transformation of traditional lighting, and then you can achieve complementary advantages with less cost.
Analysis of LED Street Lights
The lamp shell mold cost a larger part of the LED street lighting and the investment risk is relatively high. How to reduce the funds is the issue enterprises must consider. After decades of development, traditional lighting companies have accumulated a lot of mold resources, and most of them have fine shape, excellent structure, reasonable design, and also the case of engineering applications and shell products. led street lights manufacturer can choose for these products to transform into the shell of LED street lights. Design the LED light source in accordance with its light shell, and then sell the product through traditional lighting market channel, so that both can reduce a lot of mold development costs and can take advantage of traditional lighting enterprise market resources. In addition, LED lights have many advantages, but it is still beyond the reach of today's practical application, for example, today's LED street lights, there are still many technical indicators cannot meet city road lighting design standards, such as trying to use the ultra-high-power lamps lighting at high speed, but the ultra-high-power power modern LED lamps is not stable, and because of the brightness of the high-speed driving making the super power on the road lighting development is restricted. Now LED street lights cannot replace traditional street lights on all roads, the traditional street light is still preferred in some places, which requires us to respect the traditional street lamps and seek their cooperation to solve the problem with their technology and products.
Conclusion of LED Lighting
LED lighting is a relatively young industry, especially LED street lighting, enterprises need construction, which requires a lot of resources and time. LED street lamp enterprises and traditional lighting companies face the same customers, while after decades of development and nurturing the traditional lighting market network has been mature, they can understand the needs of the owners to understand the rules and mode of operation of the market, and these are precisely lacking in a lot of LED lighting companies.
This article come from:http://cell.battery-products.com/led-products/the-development-trend-of-led-street-lights.htm
Monday, January 7, 2013
Shandong Furniture Association, the five-second governing enlarged meeting held ceremoniously
The forum is divided into the two plates of the the "Qilu furniture people, then of Qilu furniture industry keynote speech and" Chinese furniture industry elite Westward Shandong theme dialogue ". "Qilu furniture people, then of Qilu furniture industry invited Shandong rich Erma Group Co., Ltd general manager Song Ping, creative director of marketing planning company in Qingdao Chi Yang Jun, U + design agency design director Shen Baohong, chairman of Ge Mingwei Business School Synthesis and Characterization of standing of Qilu furniture person point of view, respectively, the four aspects of the market, marketing, design and management experience to share. "China's furniture industry elite Westward Shandong theme dialogue" plate is divided into "solid wood furniture, see Shandong" and "Shandong soft power" the two chapters, by Dr. Zhao Long, president of the Beijing Guofu Strategic management consulting firm, featuring guest host, Shandong solid wood furniture and the two major topics of Shandong upholstered furniture, dialogue with industry association leaders, mainstream media, circulation, stores, professional design company, well-known enterprises, Shandong outstanding enterprises, representatives of the industry chain upstream enterprise guests a wonderful dialogue for Shandong furniture industry the future development of a large number of valuable suggestions.
The Introduction of SMD LED
The Conception of SMD LED
SMD LED means SMT light emitting diode which helps to improve the production efficiency and it can be used in various fields. SMD LED is a kind of solid state of the semiconductor device which can directly convert electric to light. SMD is the abbreviation of Surface Mounted Devices which means the Surface Mount Devices. SMD is one of the components of SMT (Surface Mount Technology). The 3528 SMD and 5050 SMD are two common types of SMD. SMD LED is made up of FPC board, LED lamp and high quality silicone casing. It has luminous color and waterproof performance which are convenient and safe supplied by low voltage dc power. Even using in the outdoor it has the advantages of resistance to UV aging, to become yellow and to high temperature. The products are widely used in the field of the building clearance lighting, places of entertainment decorative lighting, advertisement decoration lighting, etc. The voltage of SMD LED is 1.9-3.2V, and the voltage of the red SMD LED and the yellow SMD LED are lowest. The heart of LED is a semiconductor chip, one end of chip attached to a support which is negative, and the other end connected to the power of positive---that structure makes the entire semiconductor chip encapsulated up by epoxy resin.
The Common Types of SMD LED
3528 SMD and 5050 SMD LED are the two table stick types of light emitting diode (LED). 3528 in stand of appearance size which is 35 * 28 and 5050 means that its appearance size is 50 * 50. The luminous flux of 3528 SMD is about 3-9 lm and the luminous flux 5050 SMD is about 11-21 lm.
The Working Principle of SMD LED
Semiconductor chip consists of two parts. One part of it is a P-type semiconductor which is dominant in the whole structure, and the other end is n-type semiconductor which is primarily electronic. But these two kinds of semiconductor link, they formed a p-n junction between them. When an electric current passes through the chip on the conductors, electronic will be pushed to the P area, in the P area electronic compound with hole, and then they will be issued in the in the form of photon energy which is the principle of LED lighting. And the wavelength of light, that is the color of the light, is determined by the formation of p-n junction material.
SMD LED means SMT light emitting diode which helps to improve the production efficiency and it can be used in various fields. SMD LED is a kind of solid state of the semiconductor device which can directly convert electric to light. SMD is the abbreviation of Surface Mounted Devices which means the Surface Mount Devices. SMD is one of the components of SMT (Surface Mount Technology). The 3528 SMD and 5050 SMD are two common types of SMD. SMD LED is made up of FPC board, LED lamp and high quality silicone casing. It has luminous color and waterproof performance which are convenient and safe supplied by low voltage dc power. Even using in the outdoor it has the advantages of resistance to UV aging, to become yellow and to high temperature. The products are widely used in the field of the building clearance lighting, places of entertainment decorative lighting, advertisement decoration lighting, etc. The voltage of SMD LED is 1.9-3.2V, and the voltage of the red SMD LED and the yellow SMD LED are lowest. The heart of LED is a semiconductor chip, one end of chip attached to a support which is negative, and the other end connected to the power of positive---that structure makes the entire semiconductor chip encapsulated up by epoxy resin.
The Common Types of SMD LED
3528 SMD and 5050 SMD LED are the two table stick types of light emitting diode (LED). 3528 in stand of appearance size which is 35 * 28 and 5050 means that its appearance size is 50 * 50. The luminous flux of 3528 SMD is about 3-9 lm and the luminous flux 5050 SMD is about 11-21 lm.
The Working Principle of SMD LED
Semiconductor chip consists of two parts. One part of it is a P-type semiconductor which is dominant in the whole structure, and the other end is n-type semiconductor which is primarily electronic. But these two kinds of semiconductor link, they formed a p-n junction between them. When an electric current passes through the chip on the conductors, electronic will be pushed to the P area, in the P area electronic compound with hole, and then they will be issued in the in the form of photon energy which is the principle of LED lighting. And the wavelength of light, that is the color of the light, is determined by the formation of p-n junction material.
Sunday, January 6, 2013
Introduction of Vacuum Flasks
What is a Vacuum Flask?
Vacuum flask, if simply put, that is the bottle to be able to keep insulation. Usually it is a water container is made of ceramic or stainless steel and the vacuum layer. In the top of the vacuum thermos, there is a lid and it is tightly sealed, and the vacuum heat-insulating layer can make the liquid inside the bottle delay cooling, in order to achieve the thermal insulation purpose.
The Development History of Vacuum Travel Mug
Thermos flask is evolved from the thermos cup, and the insulation principle is just like the vacuum thermos. People make the cup into bottle is just for the convenient use in daily life, such as the vacuum travel mug is very convenient for travelling use outside, no matter how long the distance is, as long as you filled the vacuum flask with hot water, you can drink hot water during the journey any time and everywhere. The thermal spread has three ways: radiation, convection, and transfermation. The silver thermos inner the bottle can reflect radiation of the hot water, the inners and bottle vacuum can block the transfer of heat, and the heat is not easy to pass the bottle to prevent thermal convection. The thermos flask today also applies the principle of magnetized water, and that is adding magnet to the bottom of the bottle and cap, so that the water is magnetized.
Thermos Flask Functions
Most of the inside and outside of the thermos flask is made of stainless steel, and made with advanced vacuum technology. The shape is refined, elegant and seamless liner, good sealing performance, and good insulation properties. You can put ice cubes in it, or hot drinks. At the same time, vacuum flask manufacturer give functional innovation and detail design to the flask, so that makes the new thermos flask have more meaning and practicality. A thermos bottle has its own distinctive characteristics, some double-lid design, when you are driving, you just need to click the small red button in the middle, the water will automatically flow out without splashing in the car; Some have tea interval design in the middle of the thermos flask design, tea can quickly filtered, and it is ideal for office small white-collar use; and there is dual bottle design, bottom lid is filled with tea, sugar, coffee and dark cell, etc. While the vacuum liner made of stainless steel, not only can store ice water, but also can use for smoldering, usually a advanced thermos also have at least two or more functions, while the most capabilities thermos have 4-5 functions, which are very convenient for travel or home us.
This article come from:http://www.velcrotape8.com/index.php/introduction-of-vacuum-flasks.htm
Vacuum flask, if simply put, that is the bottle to be able to keep insulation. Usually it is a water container is made of ceramic or stainless steel and the vacuum layer. In the top of the vacuum thermos, there is a lid and it is tightly sealed, and the vacuum heat-insulating layer can make the liquid inside the bottle delay cooling, in order to achieve the thermal insulation purpose.
The Development History of Vacuum Travel Mug
Thermos flask is evolved from the thermos cup, and the insulation principle is just like the vacuum thermos. People make the cup into bottle is just for the convenient use in daily life, such as the vacuum travel mug is very convenient for travelling use outside, no matter how long the distance is, as long as you filled the vacuum flask with hot water, you can drink hot water during the journey any time and everywhere. The thermal spread has three ways: radiation, convection, and transfermation. The silver thermos inner the bottle can reflect radiation of the hot water, the inners and bottle vacuum can block the transfer of heat, and the heat is not easy to pass the bottle to prevent thermal convection. The thermos flask today also applies the principle of magnetized water, and that is adding magnet to the bottom of the bottle and cap, so that the water is magnetized.
Thermos Flask Functions
Most of the inside and outside of the thermos flask is made of stainless steel, and made with advanced vacuum technology. The shape is refined, elegant and seamless liner, good sealing performance, and good insulation properties. You can put ice cubes in it, or hot drinks. At the same time, vacuum flask manufacturer give functional innovation and detail design to the flask, so that makes the new thermos flask have more meaning and practicality. A thermos bottle has its own distinctive characteristics, some double-lid design, when you are driving, you just need to click the small red button in the middle, the water will automatically flow out without splashing in the car; Some have tea interval design in the middle of the thermos flask design, tea can quickly filtered, and it is ideal for office small white-collar use; and there is dual bottle design, bottom lid is filled with tea, sugar, coffee and dark cell, etc. While the vacuum liner made of stainless steel, not only can store ice water, but also can use for smoldering, usually a advanced thermos also have at least two or more functions, while the most capabilities thermos have 4-5 functions, which are very convenient for travel or home us.
This article come from:http://www.velcrotape8.com/index.php/introduction-of-vacuum-flasks.htm
Common Sense to Buy Electric Fans
Classification of electric fans
The electric fan can be divided into: the home electric fans and industrial exhaust fan according to the usage.
Home electric fans: There are ceiling fans, table fan, stand fan, wall fan, top fan stand fan, fan, box fan, air conditioning fan (ie cooling fan), etc. The desk fan is available for shaking head and no shaking head as well as box fan; The stand fan has shaking head and blade turning type. There is also a breeze small fan, which is specialized hanging in the nets. Industrial exhaust fan: It is used for the purposes of forced air convection.
www.electric-fanheaters.com is a manufacturer of electric fan and accessories with design, R&D, produce, and detection together. We are specializing in manufacturing various products, including ceiling fan, desk fan, standing fan, wall fan, box fan, exhaust fan,electric fan heaters and foot warmer. As an expert in the industry, we will introduce the notes for buying electric fan as follows:
1. Selected electric fan species according to the environment. Commonly used electric fans are ceiling fan, stand fan, wall fan, table fan, box fan and ceiling fan, among which the wall fan is fixed mounted, stand fan, table fan and box fan are easy to move, which have a wide range of air supply. The wind output size of the electric fan is basically proportional to the diameter of the fan blade. Consumers can choose different specifications fan in accordance with the area of the room.
2. Select products from the well-known enterprises which are larger and have better product quality and quality service. Because these electric stand fan manufacturers are stricter for the quality control of the raw materials, they have the state-of-the-art production equipment, higher levels of corporate management, and product quality is guaranteed.
v 3. When buying electric fan products, you should first pay attention whether the product has CCC certification mark. In accordance with the relevant provisions of the State, the electric fans will be allowed on the market unless they obtain CCC certification mark. Secondly, check whether the identification of the products is complete, formal identification should be as follows: corporate name, trademark, product model specifications, etc. Also observe the appearance of the product, the appearance of better quality products is smooth, electroplated parts or painted pieces should have no blistering traces. There should not have unusual sounds in the trial of the electric fan product.
4. Simple discriminate for electrical safety. The national standards set forth details for the safety requirements of the fans, consumers can also carry out a simple test. Qualified fan, generally the fingers of the adult cannot touch the fan blade leading edge through the cover. The families with children should choose electric fans with dense grille. In addition, the electric fan should be placed at the angle of 10 ° but not be overturned.
This article come from:http://www.electric-fanheaters.com/News/15.htm
The electric fan can be divided into: the home electric fans and industrial exhaust fan according to the usage.
Home electric fans: There are ceiling fans, table fan, stand fan, wall fan, top fan stand fan, fan, box fan, air conditioning fan (ie cooling fan), etc. The desk fan is available for shaking head and no shaking head as well as box fan; The stand fan has shaking head and blade turning type. There is also a breeze small fan, which is specialized hanging in the nets. Industrial exhaust fan: It is used for the purposes of forced air convection.
www.electric-fanheaters.com is a manufacturer of electric fan and accessories with design, R&D, produce, and detection together. We are specializing in manufacturing various products, including ceiling fan, desk fan, standing fan, wall fan, box fan, exhaust fan,electric fan heaters and foot warmer. As an expert in the industry, we will introduce the notes for buying electric fan as follows:
1. Selected electric fan species according to the environment. Commonly used electric fans are ceiling fan, stand fan, wall fan, table fan, box fan and ceiling fan, among which the wall fan is fixed mounted, stand fan, table fan and box fan are easy to move, which have a wide range of air supply. The wind output size of the electric fan is basically proportional to the diameter of the fan blade. Consumers can choose different specifications fan in accordance with the area of the room.
2. Select products from the well-known enterprises which are larger and have better product quality and quality service. Because these electric stand fan manufacturers are stricter for the quality control of the raw materials, they have the state-of-the-art production equipment, higher levels of corporate management, and product quality is guaranteed.
v 3. When buying electric fan products, you should first pay attention whether the product has CCC certification mark. In accordance with the relevant provisions of the State, the electric fans will be allowed on the market unless they obtain CCC certification mark. Secondly, check whether the identification of the products is complete, formal identification should be as follows: corporate name, trademark, product model specifications, etc. Also observe the appearance of the product, the appearance of better quality products is smooth, electroplated parts or painted pieces should have no blistering traces. There should not have unusual sounds in the trial of the electric fan product.
4. Simple discriminate for electrical safety. The national standards set forth details for the safety requirements of the fans, consumers can also carry out a simple test. Qualified fan, generally the fingers of the adult cannot touch the fan blade leading edge through the cover. The families with children should choose electric fans with dense grille. In addition, the electric fan should be placed at the angle of 10 ° but not be overturned.
This article come from:http://www.electric-fanheaters.com/News/15.htm
Saturday, January 5, 2013
Up arms rights of plagiarism furniture design to say "no"
Q: vendors selling the alleged infringing product is an infringement of the plaintiff's enjoyment of a design patent?
A: design patent is granted, any unit or individual without patents permission, shall enforce its patent, that shall not be made for production and business purposes, promise to sell, sell, import the design patent product.
Q: What design patent infringement judgment?
A: 1, to determine the scope of protection of the patent right for design. According to the Patent Law, "the first
59 (2) provides that the scope of protection to prevail in the drawings or photographs of the design patent.
2, to determine whether the appearance design patent infringing products belonging to the same or similar products. Usually based on the product's features, uses as a standard. Design patent products accused of infringing products in the function, purpose is the same, we can determine the two are the same or similar goods.
3, the design of the patented product and the alleged infringing product comparison to determine whether the same or similar. Design means exactly constitute product design shapes, patterns and colors, and combinations thereof; similar design using the design is likely to cause confusion, so that people mistakenly believe that the use of the design is the patented product.
Q: local modification constitutes infringement of patent products?
A: This involves of same or design phase approximation judgment, in practice, the same design is not difficult to identify the alleged infringing product design and appearance of the patented product design comparison, if the shape of the two patterns, colors, and combinations thereof, all of the elements of the same, compared to the same design. More difficult is the identification of similar designs.
Design similar seems refers to the alleged infringing products with the patented product shapes, patterns, colors, and combinations thereof, is basically the same, which caused some minor difference is totally inadequate to the attention of the average consumer, so that ordinary consumers to confuse the two products mistaken for this purpose that is he. In determining similar design, commonly used design to comparative law.
LED Lighting Expo Features of South China
LED Industry and LED Lighting Exhibition
The rapid development of the LED industry leads the LED exhibition frequently organized. The sweltering of Guangzhou International Lighting Fair June still exists, removed ushered in a new exhibition activities. While none other than the most active province Guangdong, mainland China LED industry development, the earliest region is also far more developed provinces in the southern region, annually held in many different sizes shows. For the year, to many people, it left a deep impression on the Guangzhou International Lighting Fair in June, and China International Optoelectronic Exposition held in Shenzhen on September 14th. There is no doubt that the two exhibition are called LED industry events, which attracted the participation of many well-known manufacturers and professional buyers, and see this international exhibition and we can see from these two large-scale LED lighting exhibitions that, led grow light manufacturer is increasing year by year.
North-south Pattern of LED Lighting Industry in China
As a rising star of the LED industry, the led strip lights manufactured in the region of northern mainland China get rapid development in recent years, and the government support and commissioning of the manufacturers also promote the establishment of the LED industry alliance around and the exhibitions also rise. Throughout recent years, the northern areas of the exhibition, it is not difficult to find, both in the number of organized the scale exhibition comprehensiveness compared to the Guangzhou region, it still seems a little less, after all, the LED industry development in the northern region is relatively slower. While the southern region, especially in the distribution of LED enterprises in Guangdong Province, the intensive development is relatively mature, the needs of the exhibitors and buyers show motivated several exhibitions organized annually, and its size is relatively large, and the number of exhibitors are more. In a word, the exhibition of the North, with the increase and development of LED companies around, also further improves and in the southern LED exhibition, it has formed its own unique characteristics and regional scale.
LED Lighting Exhibition in China and International Exhibition
Compared with the international LED exhibition, due to differences of exhibitor principle of proximity and the products of domestic and foreign enterprises, Guangzhou exhibition was not like the international exhibition to be as attractive to the more well-known international enterprises, but also has a unique charm and characteristics. First, in the product exhibition, enterprises show highlights of the unique and innovative products, no longer imitate and copy the products of large international companies. Second, in the exhibition, the increase of LED lighting products also shows that the performance of the mainland manufacturers keeps up with the market trends of the international LED industry and gradually integrates themselves into international development track, which also shows the maturity of the domestic enterprises.
This article come from:http://www.storage-battery.com/index.php/led-lighting-expo-features-of-south-china.htm
The rapid development of the LED industry leads the LED exhibition frequently organized. The sweltering of Guangzhou International Lighting Fair June still exists, removed ushered in a new exhibition activities. While none other than the most active province Guangdong, mainland China LED industry development, the earliest region is also far more developed provinces in the southern region, annually held in many different sizes shows. For the year, to many people, it left a deep impression on the Guangzhou International Lighting Fair in June, and China International Optoelectronic Exposition held in Shenzhen on September 14th. There is no doubt that the two exhibition are called LED industry events, which attracted the participation of many well-known manufacturers and professional buyers, and see this international exhibition and we can see from these two large-scale LED lighting exhibitions that, led grow light manufacturer is increasing year by year.
North-south Pattern of LED Lighting Industry in China
As a rising star of the LED industry, the led strip lights manufactured in the region of northern mainland China get rapid development in recent years, and the government support and commissioning of the manufacturers also promote the establishment of the LED industry alliance around and the exhibitions also rise. Throughout recent years, the northern areas of the exhibition, it is not difficult to find, both in the number of organized the scale exhibition comprehensiveness compared to the Guangzhou region, it still seems a little less, after all, the LED industry development in the northern region is relatively slower. While the southern region, especially in the distribution of LED enterprises in Guangdong Province, the intensive development is relatively mature, the needs of the exhibitors and buyers show motivated several exhibitions organized annually, and its size is relatively large, and the number of exhibitors are more. In a word, the exhibition of the North, with the increase and development of LED companies around, also further improves and in the southern LED exhibition, it has formed its own unique characteristics and regional scale.
LED Lighting Exhibition in China and International Exhibition
Compared with the international LED exhibition, due to differences of exhibitor principle of proximity and the products of domestic and foreign enterprises, Guangzhou exhibition was not like the international exhibition to be as attractive to the more well-known international enterprises, but also has a unique charm and characteristics. First, in the product exhibition, enterprises show highlights of the unique and innovative products, no longer imitate and copy the products of large international companies. Second, in the exhibition, the increase of LED lighting products also shows that the performance of the mainland manufacturers keeps up with the market trends of the international LED industry and gradually integrates themselves into international development track, which also shows the maturity of the domestic enterprises.
This article come from:http://www.storage-battery.com/index.php/led-lighting-expo-features-of-south-china.htm
Subscribe to:
Posts (Atom)