How Often Should We Have An Upholstery Cleaning

If you want to keep on using your furniture for a long period of time, you have to take good care of them in your home. One of the most difficult cleaning tasks is upholstery cleaning. All you need to do is to look at the professional interior cleaning company. To give you an idea, here is a rundown of care needs of the most common furniture found in homes today. 
Love Seat 
Turning over this foamed upholstery at least once a week can be easily done by the upholstery cleaners. Professional cleaning can be flipped the foam and upholstery, to help eliminate the space between the at least 20% of the dust. Doing so prevents the unpleasant smell in the development of the bottom surface of the foam. 
 
Sofa bed 
A sofa bed can be upholstered like an ordinary couch or can have a mattress just like your framed bed. For this type of sofa, deep cleaning is a necessary part of the furniture clean. Professional cleaning companies should be able to tell you the specific process they use to ensure your sofa bed is free of dust and pests. If your interior is removable, you can slide open the lid and run the wash them monthly. Fabric care instructions, please contact your manufacturer to prevent fading or bleeding of colors and patterns. The foam should also be cleaned once every year by professional upholstery cleaning manufacturers. 
Divan 
A divan is a couch style that needs frequent professional cleaning. A leatherette manufacturer explained that this is because of the relatively large padded area. Coverings and foam material inside, you may need to ask the professional cleaners a couple of minor cleaning weeks, maybe a year deep cleaning. 
Leather 
It is not all that difficult to care for leather furniture especially if they are dark colored. You just need to make sure that the leather appropriate aging. Regular wipe downs, on-site cleaning is usually enough to make you clean leather interior. It is to absorb body fluids, the overflow of the liquid and other substances, to penetrate the leather under the coverage of the fabric interior bubble is unlikely. Your leather interior need more frequent cleaning of furniture.Upholstery leather supplier which also provides professional cleaning services can be known as the expert in your leather upholstered furniture required conditions. 
www.leathermanufacturer.net was established in 2000. Its predecessor named "The frist plastic group" was established 1983. Our company is a professional synthetic leather manufacturer possessing two wet and two dry PU production lines and one set of new PVC production line as well as complete post-disposal equipment. 
The article comes from:http://www.game-dice.net/how-often-should-we-have-an-upholstery-cleaning/

How to do Leather Cleaning

In my opinion, leather is one of the most versatile "fabrics" known to man. Its many uses include shoes, cowboy boots, clothing and accessories (jackets and coats, dresses, pants, vests, purses, wallets, belts, etc.), and upholstery on chairs, sofas, car seats. 
Consequently, there's a huge market for commercial leather cleaners. What works well on some leathers, does not necessarily work on others. 
It's probably easier to have professional leather cleaners for you, but if you'd rather do it yourself, or at least give it a try, here are some tips to help keep your leather looking new. 
General Cleaning:
Shoes and belts are usually made of much harder finished leather and can be hard to clean. In addition, shoes can pick up a variety of stains. For general cleaning use: 
White vinegar
Follow up with cold pressed nut oil, olive oil or beeswax
Smear onto the shoes or belt, leave long enough to absorb well and then buff for shine. Be sure to use a lint free clean cloth or chamois. 
Removing Mold and Mildew:
Remove any mildew or mold on leather before starting with a regular cleaning. To remove mildew, try this inexpensive, easy recipe: 
1 part rubbing alcohol
1 part water
Spray on or use on a dampened cloth. Use a clean white lint free cloth and replace as it gets dirty. Avoid direct sunlight and allow to air dry. You may also turn on a fan and allow it to gently waft over the surface.

Removing Stains:
It may be impossible to remove all stains from leather, depending on their origin. However, here are some simple cleaning tips that might help. 
Cleaning Suede:
Suede presents a special problem because the nap is difficult to re-vamp once it has been wet. Also, suede is usually treated with special chemical dirt repellents because it is so difficult for consumers to clean themselves. So it is better to buy some professional cleaning kit or something from a cleaner supplier for it. 
Toothpaste straight on the stain lightly scrubbed in and then wiped off.
Try non-acetone nail polish remover wipes on ink stains.
Aerosol hairspray works well on tough stains. Spray the hairspray directly on the stain and wipe away. This may take several swipes so keep at it. Round glass water stains on antique leather tabletops made of hard stretched leather might be removed by rubbing in mayonnaise. Leave the mayonnaise for a couple of hours then wipe off. 
www.eloncleaners.com. We are a Guangzhou Science Committee certified high-tech enterprise specializing in R&D, production and sale of ELON and BIOMEIKE branded eco-friendly cleaning products. Our products are widely used to clean and protect camera lens, glasses, screens, whiteboards, leather goods, car interiors, computers, electron digital products, household appliances, office equipment, golf products, furniture and kitchen surfaces and appliances, etc., and is applicable for certain cleaning process used in factories, and other industrial environments. 
The article comes from:http://www.eloncleaners.com/news/40.htm

What is Dead Body Bag?

A dead body bag (also called a cadaver pouch) is a non-porous bag designed to contain a human body, used for the storage and transportation of corpses. Body bags can also be used for the storage of corpses within morgues. Before purpose-made body bags were available, cotton mattress covers were sometimes used, particularly in combat zones during the Second World War. However, the subsequent rubber (and now plastic) body-bag designs are much superior, not least because they prevent leakage of body fluids, which often occurs after someone dies. The dimensions of a body-bag are generally around 36 inches by 90 inches (91cm by 229cm).


Dead body bags are sometimes portrayed in films and television as being made of a heavy black plastic. Lightweight white body bags have since become popular because it is much easier to spot a piece of evidence that may have been jostled from the body in transit on a white background than on a black background. Even so black body-bags are still in general use. Other typical colors include orange, blue, or gray. Regardless of their color, body bags are made of thick plastic and have a full-length zipper on them. Sometimes the zipper runs straight down the middle. Alternatively, the path of the zipper may be J-shaped or D-shaped. Depending on the design, there are sometimes handles (two on each side) to facilitate lifting. It is possible to write information on the plastic surface of a dead body bag using a marker pen and this often happens—either in situ (particularly when a large number of bodies are being collected) or at the mortuary, before being stored in refrigerated cabinets. Alternatively, some designs of body bags have transparent label pockets as an integral part of the design, into which a name-card can be inserted. In any case, a conventional toe tag can easily be tied to one of the lifting handles if required. Dead body bags are not designed to be washed and re-used, with good reason: aside from the obvious hygiene concerns, re-use of body bags could easily contaminate evidence in the case of a suspicious death. As a result, body bags are routinely discarded and incinerated after one use.


The term body bag is sometimes used for fashion or other bags worn on the body (sling body bag or across body bag) and this sense has no connection with either of the two above senses.


www.canvas-bag.net. We are high-profile domestic and international professional manufacturer of canvas bag, Non-woven Bag, laminated bag, folding bag and Apron.


The article come from:www.handbagmanufacturer.com.cn/index.php/what-is-dead-body-bag.htm

How to Decorate a Blank Canvas Bag

A reusable shopping bag saves you the hassle of throwing out numerous plastic bags, but they aren't the most attractive accessories available. A canvas shopping bag has some potential to be attractive, though, because you can dress it up a little by decorating it to match your colorful personality. You can walk around the store proudly toting your bag instead of keeping it tucked below your groceries until it's time to leave. Some companies wholesale blank canvas bags and supply the service of decorating bags by customers. In fact, we could do it by ourselves.
1 Set the canvas bag on its side over a flat, clean surface. Tuck in the sides of your grocery bag to make the side flat and smooth out any wrinkles.
2 Place a stencil of your choice on the side of your grocery bag. Lightly trace the design with a pencil and remove the stencil.
3 Color in the stencil marks with nontoxic fabric paint. Allow the paint to dry fully and then flip the bag over. Place another stencil on the blank side of the bag and trace it with a pencil.
4 Fill in the stencil mark with more paint. Add two or more paint colors to give the designs an extra touch of decoration. Allow the paint to dry fully.
5 Attach decorative buttons to the sides and straps of the bag. Stickers also make a temporary but attractive addition to the canvas bag. It is believed that a canvas bag you made is must more beautiful than plain canvas tote bags cheap.
PS: Alphabet stencils are available at any craft store or you can make your own if you want more control over the font. To make a stencil, simply print out the words or phrase you want to stencil onto your bag. Make sure you print it in the exact size you'd like to place on the bag. Glue or tape the paper to a piece of contact paper and cut out the letters with a sharp craft knife. Be sure to use "bridges" to hold floating white space, such as those found inside the letter O or D. A bridge is a thin strip of paper connecting the white space in the middle of a letter to the stencil so that the letter comes out properly. To create a bridge for the letter O, for example, cut a vertical line at the top center and cut out a C shape around one side of the O. Then cut another vertical line through the top of the letter about half an inch over from your last cut (the cut should be smaller if you're working with a smaller font). Cut out the other half of the O. The white space in the middle of the letter will be held in place by your bridge. Paint in the bridges when your stencil is finished. When the paint is dry, peel the contact paper backing from your letters and stick them to your canvas bag.
www.canvas-bag.net. We are high-profile domestic and international professional manufacturer of canvas bag, Non-woven Bag, laminated bag, folding bag and Apron.
The article come from:http://www.handbagmanufacturer.com.cn/index.php/how-to-decorate-a-blank-canvas-bag.htm

Development Trends of LED Lighting Industry

New opportunities of LED industry

Incandescent bulbs is the world's most popular lighting source, market share is up to 70%, while its lighting efficiency is only 8 ~ 20lm/W, the overall efficiency of the lighting system is 50lm/W. Taking energy conservation into account, countries have put forward plans to make the phase-out of incandescent bulbs. China plans to ban the import and sale of incandescent bulbs over 100 watts in October 2012, and 60-watt and 15-watt incandescent bulbs will be banned for the import and sale in 2014 and October 2016. In the promotion of countries FMCT, lock-up and ban incandescent policy, looking for better luminous efficiency of alternative light source to become a top priority.China led light is in the trend of lower prices and improved quality and relying on its long life, high luminous efficiency and low power consumption characteristics, and it is expected to become the best alternative to take the place of the incandescent light source.

Product design of LED lights

In the past, LED lighting manufacturers stressed the luminous efficiency, light output and product life, and now, the growth of the technical end has become inevitable, while the products brighten consumers is designed from the consumer perspective, to meet the lighting needs of the end user lighting products. The lighting and color are the most frequent physical phenomena exposed to human. Different light intensity and color will produce different effects. When the product is more emphasis on human visual perception, lighting R & D design would comprehensively consider the eye feeling and the sensation and perception received by brain, while focusing on human physiological and psychological needs. When LED lighting applications are expanded rapidly, whether can meet the needs of consumers, create overall light environment and the appropriate atmosphere will affect the popularity of LED application, such as the application of gas station canopy lights.

Strengthen the layout of LED lighting industry

Market access is the key factor for lighting products to the terminal development. In the past, LED component manufacturers only focus on the enhancement of the luminous efficiency of LED components, and deliver the semi-finished products to the downstream manufacturers to operate. With LED are towards lighting applications, more upstream LED manufacturers expect to move towards vertical integration, and directly contact with the terminal pathway and consumers. The distinct thinking will the challenges faced by LED manufacturers, and the lack of path layout experience has also become a bottleneck of LED lighting products to the terminal.

The national project for LED opportunities

The LED opportunities are mainly integrated in: significant energy-saving technologies and equipment industrialization program; semiconductor lighting industrialization and application engineering; cities mineral, demonstration project; remanufacturing industrial engineering; industrial waste resource utilization engineering; major environmental protection technology and equipment and product industrialization demonstration project; desalination industry base construction; cultivation project of energy conservation and environmental protection service industry.

www.skyworthlighting.com

It is an international photoelectric technology industry company which is specialized in developing, designing, producing, selling LED products, and providing professional lighting engineering solutions and integrated services. Our main products included LED highbay lights, LED Canopy lights, LED emergency ceiling lamps, LED street lights, LED tunnel lights and LED panel lights, etc.

This article is come from:http://cell.battery-products.com/led-products/development-trends-of-led-lighting-industry.htm

Several Knowledge about Range Hood

Tips for the maintenance of range hood

We are likely to use the range hood in the kitchen every day, and we may come across the situation of excessive vibration and noise of the hood, the fumes cannot be spared as well as drop of oil and the oil spill in the process of using. Now let look at some basic common sense in the maintenance: first, the height of hood installation must be appropriate, including the Isaland hood. And this would ensure the range hood not to be touched by our head, but also ensure that the effect of fume extraction. Second, in order to avoid the voice of the hood or too large vibration and the occurrence of oil spills and other situations, we should regularly clean the hood to avoid excessive viscous oil on the surface of motor, turbine and hood. Third, keep the air circulation in the kitchen, so prevent formation of negative pressure to ensure that the pumping capacity of the hood. Fourth, the consumer should better not to disassemble the hood for cleaning, because once the motor is not installed well, and the smoking effects cannot be guaranteed, and will increase the noise. We should send the professional to clean.

Classification of range hood

The hood is the appliance for family kitchen to absorb the cooking fumes. At present, the hood can be divided into two categories: European-style and Chinese style. European-style hood is mainly the wall mount hoods and a part of the island high-end products; the Chinese style is mainly the wall-mounted hood. Range hood consists of fan system, control system, filtration system shell and suspension device. The fan system is the heart of the hood, and it usually consists of the motor and impeller. The size of the power is determined by the fan system. The control system is an integral part with the scientific and technological content and it has micro-board power and switch control hood. Filtering equipment mainly refers to the network and the oil filter cavity. Shell and suspension device are created by high-temperature corrosion-resistant materials, such as stainless steel.

Hood principle can be summed up as follows

First, the running motor drives the rotation of coaxial linking the impeller. Second, the rotation and agitation of the impeller make the fan blades produce the rapid updraft. Third, airflow forms the vortex negative pressure zone in the vicinity of the air inlet, so that the fumes from the gas rise rapidly. Fourth, when the fumes run to oil net, it will create rotation friction and make the separation of fumes. Fifith, when there is a certain amount of grease oil accumulated to net, and it will flow into the oil cup due to the force of gravity.
www.kitchen-hood.net
We have an annual capacity of 1,000,000pcs Euro-style cooker hoods. Our products have been exported all over the world, especially Europe, North America, South America, Asia, Australia, and Africa etc.
The article come from:http://www.soundspeakers.cn/index.php/several-knowledge-about-range-hood.htm

Global High-brightness LED Market Value of 2012

Global High-brightness LED Market Overview

According to estimates, the annual growth rate of high-brightness LED market value will be 13.4%, a size of up to $ 10.1 billion; the MOCVD machine demand in 2012 will be substantially reduced to 200, and the LED industry in the first half of the economy will be weaker, and therefore it will be difficult to revert to high growth scenarios for 2010, if the new machine built, the forecast will focus on the second half of 2012 installed. 2012, Japan, South Korea, Taiwan, the high brightness LED market weightings amounting to 61.3%, it can be described as Asia leading the LED industry trends become more apparent. Which, the growth rate of the Chinese mainland in 2012 will reach 30%, the main reason for the large orders previously MOCVD machine will be about 150 Deferred to put into operation in 2012, the contingent is worth nothing that the mainland led spot lighting products will continue to stay in the low power field.

Rapid Development of LED Light Bulb Market

From the rapid development of outdoor led landscape lighting bulb market point of view, the 2012 new LED industry will be replaced by the 60W incandescent, however, we have to notice that the considerable 60W, brightness of 800 lm LED bulb price is still high, it is $ 40 and various districts prices required by the market are not the same, $ 25 in Japan, Europe and the United States is about $ 15, and the emerging area is about $ 7. Therefore, in 2012 the proportion of energy-saving light bulbs are still high, LED bulbs penetration rate will be 5.4%, while the shipment quantity will reach 1.05 billion pieces.

Overall LED Lighting Market

To look at the overall LED lighting market, although the 2011 penetration rate is only 6.6%, but there is potential for future growth. Countries in the development of LED lighting have introduced policies and incentives, which, in 2015, Japan plans accounted for LED general lighting market will reach 50%, and 30% in South Korea, mainland China is 20%, for up to above 2015 target before this few years will be the first up to the short-term tasks; in addition, LED technology continues to progress, given an objective point of view to the U.S. DOE, in 2014 white LED device luminous efficiency will reach 200 lm / W, and the price will drop to about $ 2 / klm, vendor technical processes beyond the above values. Therefore, the global LED lighting market penetration will be 11.3% in 2012, rising to 25.8% in 2014, the output value rose will be up to $ 41.9 billion in 2014 from $ 16.5 billion in 2012.
www.progressive-hk.com is a high-tech company giving priority to environmental protection, energy saving and carbon reduction. We have a series of energy saving technical products such as LED street light, LED city lighting lamps, power generation system of amorphous silicon solar light-gathering. Welcome to have a visit to our website!
The article come from:http://www.storage-battery.com/index.php/global-high-brightness-led-market-value-of-2012.htm

Future Development Prospects for Intelligent LED Street Light Industry

User-friendly smart design is used in LED street lamps

With the continuous development of the modern society and progress, a lot of household items and electrical appliances are increasingly improving the product humanized operation toward artificial intelligence, among which the best in the electrical product market is the touch phone, laptop. As the current emerging industry, of course,Wholesale Led Light products also do not fall far behind, which has used a variety of user-friendly smart design in the power LED street lamps, electronic ballasts, tunnel lights drive and other related products.

Advantage of LED intelligent lighting control system

Use LED intelligent lighting control system to carry out centralized monitoring and control. Depending on demand, dimming LED lights, garden lights by time, it can save 20% to 30%, and prolong the lamp life. The advantage is that the control of each phase using preset independent information storage, when there is a line failure, you can immediately detect the point of failure and failure sacrifice quality and save, which is conducive to troubleshooting, save resources and time.

Artificial intelligent LED products are imperative

To make the bridges on the rivers have the more shocking light and shadow performances and landmark effect, the led street light manufacturer design a complete set of high-tech intelligent control systems and lighting change programs for the bridge, then it can generate cheerful or brilliant or inspiring or quiet rich scene change effects, enabling the bridge to better interact and blend with heaven, earth, the waterscape and people, so as to write a gorgeous cadenza. The bridge LED lighting control system uses the TCP / IP protocol, and is optimized by signal transmission, making the LED lighting system connected devices more and connection distance longer; the Transmission Control Protocol makes the LED lighting system control quality and reliability higher, two-way communication makes the remote monitoring and control equipment more effectively, so the LED landscape lighting control system is more stable. With the development of technologies and markets mature, the artificial intelligent LED products are imperative. The sophisticated science and technology is the basic guarantee of the healthy development of the LED industry, and the constant voltage constant current integrated modular products will become mainstream, which will also gradually increase the intelligent control function.
www.hillopto.com a new, "green" and high-tech enterprise, specializing in manufacturing LED series products with one set of research, development, production, distribution and after-sale service. If you are interested in our products, please feel free to contact us!
The article come from:http://www.soundspeakers.cn/index.php/future-development-prospects-for-intelligent-led-street-light-industry.htm

LED Candle Lamp - A New Type Light

LED Candle Lamp

LED candle lamp is a kind of LED bulbs. It is named candle lamp because of its shape looking like candle flame and its soft yellow lights. There is no danger to use LED candle lamp because it takes LED bulb as the lamp bulb, which insures users a safe scene effect.

Principle and Prospect

There is a power-saving bulb built in the LED candle light so that it may continuous work for a long time with only three small lithium batteries, without the situation of lamp-socket overheat. LED candle lamp is consisting of candle-shaped lamp body, a lamp holder to connect with lamp-socket, and luminophor built in the lamp body. The luminophor is LED, and the two electrodes of LED are connected with the corresponding electrode of lamp holder. Because LED is applied to be the luminophor, LED candle lamp saves electric power greatly with long life span, high light, uniform light transmittance effect. At the same time, it is not necessary to apply vacuum bulb made of glass as the lamp body. Instead, using plastic material prevents the lamp body from damage and makes it more durable.

The LED Candle Lamp Holder

The lamp holder adapts to standard E14, E27, E26, MR16, and GU10 lamp holders, which enables more convenient installation.
Advantages of LED Candle Lamp
First, LED candle lamp saves energy. Its energy consumption is only one tenth of filament lamp and one forth of energy saving lamp. Its life span is more than one hundred thousand hours. That means using an LED candle lamp once for all to ordinary families' lighting.
Second, it can work under high speed. If energy saving lamp starts or turn-off frequently, the electron-tube heater will turn black and be damaged. Third, it is solid state encapsulated. Belong to cold light source type, it is convenient to transport and install. It can be built in any micro and closed equipments, without worry about vibration.
Forth, LED lamp technology is being improved with each passing day. Its luminous efficiency is broken through strikingly. And the price of LED candle lamp is lower and lower. An age is coming soon – white light LED lamp entering family.
Fifth, it is environmental. Without materials harmful to environment like Hg, LED candle lamp will not do damage to environment. The assembling parts of LED light can be easily taken apart. Anybody could recover it. In addition, LED will not emit infrared ray and ultraviolet rays so that it will not attract insects. Last but not least, it enjoys high response speed. LED can respond soon and thoroughly eliminate disadvantages of traditional lights' long start-up procedure.
www.ledbulb8.com is a Hi-tech enterprise which specializes in developing, manufacturing and marketing of LED lighting. We design and manufacture LED Bulbs, LED Candle lights, LED Panel lights,LED Tube Lamps, LED High bay lights, LED Auto lights and LED commercial lighting products, is one of led lighting manufacturer, suppliers and exporters of LED lighting products in China.
The article come from:http://www.soundspeakers.cn/index.php/led-candle-lamp-a-new-type-light.htm

LED Lights Gradually Replace High Energy Consumption Energy-Saving Lamps

LED lamps are replacing energy-saving lamps

Energy-saving lamps replaced incandescent lamps and have been used for more than a century; the LED lamps achieve "equal landscape" point as energy-saving lamps, but only spent a decade. Due to energy consumption, pollution and other aspects of disadvantage, the footstep of led light bulbs wholesale replacing energy-saving lamps is getting faster.

Home lighting farewell to "Edison Era"

According to the incandescent roadmap released by the state, 100 watts and above ordinary incandescent lighting is banned for sale and import from October 1 this year. From September 1, the EU also comprehensively ban incandescent light bulbs, the traditional incandescent bulbs have completely withdrawn from the market. This means that our home lighting also officially farewell the "Edison era” which has continued for 100 years. In 1879, Edison made carbonized fiber (carbon filament) incandescent, marking the incandescent was born. Over centuries, after the continuous improvement of filament material, the filament structure and the filling gas, the luminous efficiency of incandescent is correspondingly increased, but other lighting technology also developed. After 1995, a three-band fluorescent lamps, which is commonly called "energy-saving” lamps slowly become the main choice for home lighting. Currently, eighty percent of households use energy-saving lamps for lighting.

LED lamp life depends on the quality of the ballast

Due to different emitting principle, the incandescent lamp life depends on the quality of the tungsten lamp, while energy saving lamp, LED lamp life depends on the quality of the ballast. The quality of products made by different led lights manufacturer is different. In theory, the service life of the various types of energy-saving lamps, LED lamps incandescent tungsten is less different, about 8000-10000 hours, a ballast is composed by twenty or thirty electronic components, if one is poor in quality, the whole lamp is broken. This is we usually say that the life of a product is determined by the "short board". Theoretically, each of the electronic components has a certain number of switching times, frequent switching makes electronic components keep startup, shutdown, and will shorten the time of use; Further, since the energy saving lamp electronic components and tubes location is very close, if being turned on for a long time, tube heating will also affect the service life of the electronic components.
The lamps should be regularly kept clean
Currently, the price of an energy-saving lamp is about 10 times as that of an incandescent lamp. According to the city lighting management test, the useful life of energy-saving lamps is decreased by about 3 hours per switch. Therefore, do not frequently switch lights, or it will easily cause the lamp to extinguish or even burst. In addition, if the lamps accumulate dust, it will result in decreased output efficiency, brightness dimmed and life shortened. If residents regularly keep the lamps clean, maintain the output in the best condition, it will not only extend the lamp life, but also better achieve the purpose of energy saving.
www.tp-ledlight.com is one of the leading electronic manufacturers in China. We provide a wide range of products: PCBA for home appliances, auto lightings, LED lightings, induction lightings, portable charger, new energy, etc. We also provide end-to-end OEM/ODM service to worldwide customers.

Development Trend of Mattress Industry

Design and R & D capabilities
With the improvement of people's quality of life, people put forward higher requirements on furniture supplies, comfort, environmental protection, novelty, especially mattresses. The idea of comfortable and healthy sleep dream requires the technical content mattress is elevated to a new level, which also provides value-added space for mattress products. In addition, to meet the preferences of different groups of people, it is necessary to enrich the variety of furniture products and accelerate the speed of product innovation for mattress factory, this furniture enterprises with superb design techniques. Require huge capital investments and the rich experience accumulated, R & D and design capabilities enhanced enterprise only has sufficient funds, reserve a lot of talent on the basis of progress has been made in the furniture industry.

Brand awareness of mattress
Human spend one-third of the time in bed. In recent years, with the promotion of scientific knowledge, healthy sleep concept is deeply rooted among the consumers and we pay more value to the furniture product quality and environmental performance. While in the context of products serious homogenization, the brand will undoubtedly become the most intuitive orientation of furniture products. However, the establishment of the brand requires a long period of accumulation and investment, and the durables characteristics of furniture decides this process slower and longer, which is precisely the opportunity for the mattress manufacturer has a brand advantage.

Channel building capacity of mattress companies
Sales channels are not only the terminal for the furniture enterprises to realize the profits, but also the platform to convey product information directly to consumers. By taking advantage of marketing network, enterprises can launch its own product through the marketing network, to seize market opportunities; the product will be at a disadvantage in the competition in the market without perfect marketing network. Establish a nationwide sales network and implement effective management is the key to the long-term survival of the furniture companies. Furniture terminals concentrate in large home stores, the shop area is large, decoration requirements are high and difficult to obtain; and it takes a big investment to build self-outlets, and the cost of follow-up management is high; there is uncertainty on the control for the development of the franchisee, which is formed a higher threshold for market access.

Management capacity of mattress enterprises
Capacity and sophistication of enterprise management determines the efficiency of business operations and cost which plays great significance to enhance the competitiveness of enterprises and operating efficiency. It needs long time to accumulate at the aspect of network marketing, research and development, procurement, production management capabilities, and it is a barrier for the new entrants to participate in the competition and enhance the management ability.

The ability to control costs of mattress enterprises
At present, the profit level of the furniture companies increasingly average, only the enterprises with better ability to control costs, the advantage of scale in order to survive in the fierce competition.

www.thespringmattress.com With 4 factories and daily production capacity of 3,000pcs, Eurasia distributes our premium quality mattresses worldwide. Having more than 1,000 employees and 2 overseas branch offices in Korea and Australia, Eurasia is expanding in terms of sales volume, market share and brand recognition. Being proud of our experienced designing team, Eurasia processes world leading ideas to bring better sleeps to customers.

LED Light Fixtures Thermal Conductivity don't need Metal but Plastic

Advantage of rapid development of the LED industry
LED has gained wide recognition and favor by virtue of the small size, low power consumption, long life, high brightness, low in calories, high environmental protection, durable advantages. In just a few years, LED light fixtures have widely replaced traditional lighting accessories, especially in the automotive, electronics, medical and other cutting-edge industries and fields. The rapid development of the LED industry greatly boosts the development of the upstream material industry, and further promotes breakthroughs in the field of high-end materials.

The thermally conductive plastic is developed
LED light fixtures use a large number of plastic parts, including the packaging element of the LED chip, LED optical lens, the light scattering element, efficient heat dissipation member, the light reflecting and light diffusing plate. Though

are energy-efficient and have smaller amount of heat, but the pros and cons of the thermal performance of the thermal conductivity components are critical for LED lamp life and energy efficiency. Thus, researchers use thermal conductive filler to uniformly fill with the polymer matrix material, in order to improve its thermal performance, and developed the thermally conductive plastic that can effectively transfer heat.

Thermally conductive plastic advantages
Thermally conductive plastics are increasingly replacing the metal parts to be used as thermal conductivity parts of flexible led strip lights, including lamp holders, cooling, heat lamp cup and shell. Compared to traditional metal materials, thermally conductive plastic has many advantages, which are the following four points: Firstly, even heat dissipation and avoid burning point, reduce local deformation of parts caused by high temperature. Secondly, light weight; it is 40-50% lighter than aluminum. Thirdly, convenient forming and no need for secondary processing. Fourthly, the product design has a high degree of freedom.

Thermal conductivity plastics will have very good prospects for the application and space for development People now maintain a high degree of attention to carbon dioxide emissions, and gradually increase the awareness of energy saving and environmental protection, and the birth of the LED technology helps people achieve the goal of sustainable development. Using thermal conductivity plastic to take instead of metal is able to increase the flexibility of the lighting design, reducing the total weight of lamps. In addition, the application of conductive plastic can effectively improve lighting efficiency, saving power consumption. With more attention given by the government departments, making efforts to increase technological innovation and investment in the area of special materials, LED materials, especially the thermal conductivity plastics will have very good prospects for the application and space for development.

www.ledlightmx.com is a high-tech lighting enterprise deal in develop, produce and sales. Our LED diodes, such as DIP LED, High power LED, COB LED. are widely applied in lighting, backlight, indoor and outdoor display screen, etc. If you are interested in our products, please feel free to contact us!

Basic Introduction about LED Spot Lights

1. LED Spotlights basic definitions

LED spot light is also called projection light, spotlight, floodlight, etc. which is mainly used for architectural decoration lighting purposes (not yet reached functional lighting purposes), its appearance is available for round and square, because generally we have to consider the reasons of heat dissipation, therefore the appearance of led spot lighting still has some differences with the traditional spotlights.

2. LED Spotlights basic parameters

Currently the commonly used LED spotlights on the market basically use 1W high power LED tube (each LED tube has a high optical efficiency lens made of PMMA, whose main function is secondary distribution of the light emitted by the LED tube), few companies choose 3W or higher power LED tube because cooling technologies are handled well. There are 1W, 3W, 8W, 12W, 18W and 36W power forms, because all have to take cooling factor into account, therefore each high-power LED spot light will be equipped with a cooling device (aluminum is commonly used). The size of the heat sink depends on the size of the LED tube power, which more or less brings a little inconvenience to the LED spotlights shape design. Throughout the industry, affected by the price, light efficiency and universal recognition and many other factors, the application of high-power e27 led spot light is not very wide, but this situation is slowly changing, and there are a lot of engineering in the country has applied high-power LED spotlights.



3. LED spot light control form
LED spotlights have external control and internal control two control modes; the internal control doesn't need external controller, can be built-in with many change modes (up to six), and the outer control will have to configure external control controller before color change. The majority applications on the market are external control.

4. Main applications and the effect can be achieved

LED spotlights can be used without controller in minor works applications through the control of built-in microchip, to achieve a gradual transition, color flashing, random flashing, alternating gradient dynamic effects, which can also achieve scan results by DMX control chase. Currently, the main application areas are: single building, historical buildings exterior lighting, the building "inner light penetrating outside" lighting , indoor local lighting; greening landscape lighting, billboard; medical, cultural, and other specialized facilities lighting; bars, discos, etc. entertainment atmosphere, lighting, etc. As LED technology continues to evolve, it is believed that it will replace the traditional spotlights one day.
www.progressive-hk.com is a high-tech company giving priority to environmental protection, energy saving and carbon reduction. The company joins hands with Hong Kong ASTRI to develop efficient LED products in oudoor lighting project, to provide the society with more energy-saved and environmental protection products.

Chinese LED Market Becomes More Rational

LED Financial Subsidies Promote LED Declining

Due to the double incentives of policy efforts and the huge market, China LED market dynamic has been the industry focus. Chinese official released before the annual semiconductor lighting products financial subsidies to promote the project has been officially opening. The results of the bidding, the agency Trend Force's research department of the global market research think that LED inside the finalists is a significant reduction in costs and prices, the Chinese LED lighting industry mainstream standards have been raised, lighting the advent of the sweet point, future foreign investors in China market face competition in the local Chinese manufacturers, which has been inevitable. Seen from quotation, street lamps of outdoor lighting and outdoor led landscape lighting, the average cost per watt has reached about 11 RMB, compared with the general 15-18 RMB / W market price have reduced significantly. The bid opening price is significantly lower than the market price is a manifestation of the effectiveness of direct financial subsidies. Indoor lighting costs are pulled down to 7 RMB / W standards, this value is close to the critical point start LED inside forecasts indoor lighting market, under the financial subsidies promotion, the consumer to bear the price will further decline to 5 / W, is expected to be relatively ideal market acceptance.

LED Lights Reflect the Cost of Power

As for offer, since the tender sets up a lot of restrictions, such as requirements to be included in the module and interface versatility scoring factors to reduce product complexity, while the establishment of a minimum annual production requirements, to ensure the high productivity of the bid opening businesses, therefore as for the shortlisted companies, the offer is relatively much to be rational, LED inside said that under the new bidding rules, party lighting design standards of quality and optical efficiency has higher degree of homogeneity, so the power is the main factor to affect offer. In luminous efficiency, to be able to monitor the luminous flux of the street lamps and outdoor led light bulbs, for example, the successful vendors also reflect the high design standards. As for the average light efficiency, lighting efficiency of many manufacturers has reached more than 100 lumens per watt.


The Level of LED Lamps Efficiency Rises

LED inside thinks that the successful vendor is expected to further open markets, through financial subsidies enhance seepage through the terminal market penetration for LED industry to open more to the overseas market, to ease the current industry overcapacity problem. Chinese manufacturers have the opportunity through better value for money, boost sales and to get a larger share of the subsidy, and promote the rapid development of the upstream industry chain in China.

www.progressive-hk.com is a high-tech company giving priority to environmental protection, energy saving and carbon reduction. The company joins hands with Hong Kong ASTRI to develop efficient LED products in outdoor lighting project, to provide the society with more energy-saving and environmental protection products. Welcome to have a visit to our page!

Judge the Development of LED Industry through Canton Fair

Led commercial lighting sweeps the lighting industry
LED industry will focus on it development in the lighting industry, which means that the lighting will be an important area for the future development of LED. When it comes to lighting industry, we have to mention LED light bulbs for home; and when it comes to commercial lighting, LED lighting distributes everywhere. It attracts much controversy. However, regardless of external public opinion, the development of LED lighting is still high-speed forward. We have to admit, LED lighting has become a trend of the future development of the industry. With the lightning speed, it sweeps the entire lighting industry.

Status quo of commercial LED industry
Currently, LED commercial lighting product has entered a stable stage of development. From the technical level, the LED has obvious advantages for the use in the field of commercial lighting, these advantages include energy saving, long life, instant start and high color. The traditional commercial lights include incandescent, halogen, fluorescent lamps, energy-saving lamps and metal halide. G24 light bulb can be a good alternative to incandescent lamps, halogen lamps, and energy saving is up to 90% or more, and its life is 50 times of these traditional lamps. The luminous efficiency of energy-efficient lamp in Traditional lamps is 50-60lm / W while LED light efficiency can reach 100lm / W, and the utilization efficiency of the LED lamps is higher than the energy-saving lamps, energy saving is up to 60%. Admittedly, the development of LED commercial lighting brings the opportunities and challenges to many LED business. In order to keep the steady development of enterprises, product quality must be guaranteed. In addition, lighting design and power control system is also very critical for LED lighting manufacturers. We are optimistic about the Led commercial lighting market, and commercial lighting LED lighting plays an exemplary role.

Factors for the improvement of LED commercial lighting
For a commercial place, atmosphere is very important, and lighting can create huge profits for the business. In the future, LED alternative to traditional lamps in the commercial space will be more and more mature, and the stability of the LED products will be further improved. And the key factor to promote the LED lighting industry is the price. Particularly in civilian areas, we are more sensitive to the price factor. Therefore, the high quality and cheap LED lamps in the future will be the key for the enterprise to promote the development of LED commercial lighting market. Lighting market is a long-term market, and we have to think about how to develop their own in a market. After many twists and turns, commercial lighting is facing new possibilities. We also expect that enterprises can develop orderly to boost the LED commercial lighting into the golden period of development.

www.fytled.com FYT LED specializes in manufacturing and exporting LED spot light (GU10, MR16, PAR, AR111), LED tube, LED panel light, LED bulbs, LED Downlight.We have exported to more than 50 countries such as USA, UK, Spain, Holland, Belgium, Germany, Italy, South Africa, Austrlia, Brazil etc.

Common Sense for Buying LED Tube Lights

LED tube lights are more and more widely used
LED is rapidly moving toward the market because its light-emitting principle is better than the traditional incandescent and fluorescent lamps, energy-saving, environmental protection and health, especially led tubes China, increases at an annual of 40%, going to the shopping malls, schools, hospitals and factories. The schools and hospitals in individual districts almost popularized LED tube lights. Now we will introduce the notes for the purchase of LED led tube lighting as follows:

1. Choose the right color temperature. LED fluorescent installation location is high, you can buy the high color temperature, such as: 6500K - 7000K. Light color seems a bit bluish. As LED light efficiency is relatively high, despite a bit harsh, because it is installed high, the chance to direct exposure to the eye is very small. If the installation location is low, there will be more opportunities to direct expose to the eyes, then you should choose the low color temperature, which is close to daylight, such as color temperature: 5500K - 6000K. As the light is softer, eyes feel comfortable.

2. The selection of LED light tubes also needs to consider the appropriate power. The LED tube with the same energy consumption is different in its luminous flux. Select high-quality, large luminous flux LED led tube lighting to replace the traditional fluorescent lamp can consider installing less. Do not substitute 1:1 with the traditional fluorescent.

will be more energy-efficient. In order to save energy and protect the health of workers, the production workshop of a company in Dongguan first install high-quality 18W LED fluorescent light in the workshop produced by our company, which is brighter than the original brand fluorescent energy saving lamp 40W, and finally the effect difference with the original two traditional fluorescent is small.

3. Choose the right appearance: the general LED fluorescent is still stuck in the traditional fluorescent stage in the concept of users. So, no matter what the situation is, it requires the light to be the same with traditional fluorescent. The led tube light manufacturers add soft board in the LED tube, making the light looks like the same as traditional fluorescent. In fact, the soft plate has loss to light energy, which is generally between 15- 30%. If the installation location is higher, eyes are not easy to be often irradiated, then you can consider a transparent cover, otherwise selecting low power small LED fluorescent light will be more energy efficient.

4. Choose the right type of fluorescent tubes. Fluorescent lights use low power SMD lamp beads, the overall calorific is not too much. But if there is better heat dissipation, the light fades will be further reduced and the life expectancy will be increased. The LED fluorescent appearance is large, the radiator area is much larger and heat dissipation is much. If possible, try to use T8 \ T10 tubes. Of course, T10 tube shape is larger and its cost is also high, based on experience, T8 tube is the most appropriate. T4 \ T5 are smaller. Especially T4 tube, you cannot choose large high power. Select appropriate led tube according to the specific workplace.

www.ervan.cn is one of the top 10 LED Tube manufacturers. We set up on the firm belief of offering the high quality, unique design and fully warranted LED tubes to our customer at the most competitive price.

If you are interested in our products, please feel free to contact us!

Chinese 20W LED T8 Lamp went into $50 After-Era

LED bulb is not popular in LED market in China
Unlike Japan, South Korea and other Southeast Asian market performance, the LED bulb is not popular in LED market in China. Compared to traditional lighting, LED bulb has strong substitutability, but the cities in China are not the home of the LED bulb market; the rural market which large uses bulb has no starting amount due to the high price of LED bulb and not high awareness confusing.

Situation of Chinese civil LED lighting market
Insiders said that the starting point of the Chinese civil LED lighting market is the city, the LED lamp which has a strong substitutability like LED bulb will be the force product in civil lighting market. Why is led tube lamp unable to enter millions of households? LED inside think that there are three main reasons: firstly, because the price is too high; secondly, the lack of government support and promotion effort is not strong enough; thirdly, policy majority only shouts slogans but not being implemented. The market and consumers cannot accept LED tube expensive price and performance is the main reason why the market has not broken the ice barrier. Actually an ordinary energy- saving fluorescent lamp price is just more than 10 RMB, while an LED fluorescent tube sells 100 RMB. Experts believe that if the cost of the light source is dropped to 10 RMB, wide voltage 20W LED T8 cost is about 42 RMB, the Chinese mainland market can use single voltage drive power, then the power part of the cost can come down, if large quantities production, single voltage 20W LED T8 lamps cost is about 30 RMB.


Two conditions to lower down LED lighting costs
LED insides observed that the cost control for LED lighting products is the most important issue faced by many enterprises. Rectangular lighting Linsen, Chau Ming Neo-Neon LED business launched low-cost LED products to respond to the Chinese market. Chau Ming Lin Ming-feng, general manager, pointed out at Guangzhou Guangya Exhibition this year, LED lighting costs can lower down, but need the support of two conditions. First, the LED should form industry standards; secondly, the amount of production.

The future cost of LED lighting source will be very cheap
The industry experts analyzed that with the LED upstream inputs and technological breakthroughs of Chinese local enterprises, the future cost of LED lighting source can reach a few cents per watt, which is almost negligible in lighting costs. It can be inferred that the cost control of single voltage 20W led t8 tube light used in the China market in less than 30 RMB can be achieved. Experts believe that if the low price 50 RMB 20W LED T8 lamp LED appears in civilian lighting market, the civil lighting market in China will appear subversive sexual revolution, then the traditional T8 tubes sold by the international companies in the Chinese market may have serious market squeeze.

www.ervan.cn is a professional LED tube manufacturer located in Shenzhen, China. We set up on the firm belief of offering the high quality, unique design and fully warranted LED tubes to our customer at the most competitive price. If you are interested in our products, please feel free to contact us!

related post

Selecting Modern Kitchen Cabinets

There are countless corporate that produce LED tubes on the market, but the product quality and performance are very different, which makes the foreign trade enterprises who do not understand the line, energy companies, engineering firms, foreign-funded enterprises Procurement Office in China and other non-professionals do not know how to distinguish the quality and performance of China led tube in the procurement process. If you do not know when purchasing products, you may spend the ideal price but don’t buy their ideal product. You can purchase LED tubes from the following aspects: profiles, power and chip...
The Development of LED Display in China

CREE has a plan to shift the focus to the Chinese LED industry, the company in 2010 to about $167000000 in investment the majority will use in china. China and Asia LED market growth, is the foreign enterprise growth to gain maximum power. In fiscal 2010, CREE Asia market revenue accounts for its total revenue of about 2/3, the Chinese mainland and Hong Kong area's revenue growth up to 100%...

How to Choose Right LED Tube and Standards?

Purchase LED tubes from three aspects
There are countless corporate that produce LED tubes on the market, but the product quality and performance are very different, which makes the foreign trade enterprises who do not understand the line, energy companies, engineering firms, foreign-funded enterprises Procurement Office in China and other non-professionals do not know how to distinguish the quality and performance of China led tube in the procurement process. If you do not know when purchasing products, you may spend the ideal price but don’t buy their ideal product. You can purchase LED tubes from the following aspects: profiles, power and chip.

1. Profiles, structure

Now there are basically two kinds of profiles on the market: all-plastic, half plastic half-tubes. 1) All-plastic lamp: early LED tubes used all-plastic tube, because they mainly use the non-isolated power, in order to avoid the risk of electric shock problem, people hope to use all-plastic lamp. The biggest problem of this fluorescent lamp is the cooling problem, because the heat is sealed in a tube, which cannot spread it out, the light decay is very serious, additionally the original life of the straw hat tube is very short, which will be bad in less than 2,000 hours.
2) Semi-plastic half aluminum tubes: the LED tubes sold by China led tube manufacturer on the market are basically this kind of half PC half aluminum, which uses plastic on the half part needs opaque and uses aluminum alloy on the other half which doesn’t need light transmission and heat dissipation. Power is certainly inside the tubes, then LED's heat plus the heat of the power supply is quite large, because the highest power of such a lamp is about 25W. If the power is bigger, half tube cannot solve the heat problem.

2. Power supply
LED tube light power is divided into built-in and external two kinds. The so-called built-in power supply can be placed inside the tube. The biggest advantage of this built-in The

can be made into a direct replacement for existing fluorescent tubes, which doesn’t need any circuit changes. So the built-in shape can be strip, in order to be inserted into the semi-circular lamp.

1) Non-isolated constant current power supply: non-isolate means there is direct connection at the load and input terminal, so there is the risk of electric shock if you touch the load. The advantage of the non-isolated constant current source is that the circuit design is simple, the manufacturing cost is not high. The drawback is that it will introduce the high pressure of the power supply to the load side, causing the danger of electric shock.

2)Isolated constant current power supply: Isolate means there is isolation transformer to isolate in the input terminal and an output terminal. However, both can isolate the input and output. The advantage of isolated constant current source circuit is the complex design, which can avoid the risk of electric shock. The disadvantage is that the efficiency of the power supply will be reduced, and manufacturing cost is high.

3. Chips Currently the chips used in LED tube light are 3528, 2835, 3014 and other specifications, these types of specifications are mainly not the same in sizes, the chip cooling mode. The same brand chips may have the different package manufacturers, so the quality is not the same.
www.ervan.cn is a professional LED tube manufacturer located in Shenzhen, China. We specialize in manufacturing and developing quality LED tube lamp. If you are interested in our products, please feel free to contact us!

What is SMD LED?

Specifically, it is a light emitting diode which is welded and installed on the circuit board. An SMD LED is quite small, because it has no clue or the packaging around, and with the standards of the LED. This means that it is easy to be operated, for it is equipped by automated assembly equipment rather than by person. An SMD LED also has a wide viewing angle, and it does not have a standard LED epoxy enclosure, which focuses the beam...
Chinese LED Market is Expected to Exceed 100 Billion U.S. Dollars

As a new type of semiconductor light source, the birth of the LED causes the fourth lighting revolution in human history. In some developed countries, the energy saving LED has long been popular, and began to be mass popularity. Accompanied by the rise of the concept of low-carbon economy, as the most populous country in the world, the Chinese government highly recommends the use of LED light source. According to statistics, in 2011 the scale of China's LED lighting market was 21.14 billion yuan, an increase of 32.6% over the previous year...

Notes for Gas Water Heater Usage in Winter

Special precautions for winter gas water heater usage
Winter is coming, the temperature decreases, domestic gas water heaters use frequency is increasing, in order to allow consumers to enjoy the convenience, fast, warm water life brought by the tankless gas water heaters in a safe and worry-free way, domestic gas appliances leading enterprises remind special precautions for winter gas water heater usage.

一. Pay attention to the right installation and use, and maintain indoor ventilation, prevent poisoning caused by excessive concentration of carbon monoxide.

1. In accordance with the requirements of the national standards, in addition to balanced gas water heater,stainless steel hot water heater and other types of 2. In winter, because of the cold weather, the doors and windows are often closed in the use's home, so the exhaust pipes should be installed in the ventilation place or exhaust fans should be installed. Check whether the exhaust fan is turned on each time before you use

3. Exhaust pipes must be installed with anti-down wind device, and we should always pay attention whether the exhaust pipe is unobstructed, whether there is distortion and clogging anomalies; 4. Avoid placing the exhaust pipe in the downdraught orientation at installation, if you find downdraught of the exhaust pipe or water heater flue when smoke poured from the flue in windy weather, the gas water heater should be suspended. 5. Carry out regular safety maintenance for the gas water heater to avoid gas leakage.

二．Pay attention to drain the remaining water in the tank to prevent the tank from cracking to cause pipes leaking
In winter, the temperature of most areas in the north of the Huaihe River in China is below 0 ℃, if don’t carry out freezing treatment in such climatic conditions, the residual water in the gas water heater tank may cause the tank cracking in cold conditions, eventually leading to gas water heater scrapped and pipeline leaks, even the products with active antifreeze function still exist this risk. Further, since the air can enter the gas water heater exhaust flue, cool air in winter may cause the condensation of the residual water in the water tank and cause the tank cracking. Therefore, special attention should be paid to the antifreeze processing of the gas water heater.
1. When the temperature is below 0 ° C, the complete operating prevention tank cracking can be finished according to the following five steps: close the gas valve and cut off the power supply; close the inlet valve; open the hot water valve; turn the temperature adjustment knob to the "low-temperature" or "large water "position; Removing the drain valve for drainage. If used again, we must first fit the drain valve before normal use
2. The work environment temperature for gas water heater with an active antifreeze function must about -15 ℃. Therefore, in order to avoid not being able to grasp the environmental temperature changes and unforeseen circumstances occurrence, user with active antifreeze function gas water heater is recommended to complete the prevention tank cracking operation in accordance with the above steps after each use.
www.ouyi-kitchenappliance.com is a leading supplier specializing in household appliances, selling more than 2.8 million products to the global markets every year. OUYI products include range hood, gas stove, sterilizer, gas/electrical water heater, gas cooker with oven, gas heater, bath warmer, etc.

If you are interested in our products, please feel free to contact us!

Notes for Selecting Kitchen Cabinets

1. Notes for the identification of the plant capacity --- small workshops or large factories
The production equipment of many manufacturers is simple and crude, and mostly are manual operation (3-5 million RMB devices), do one when receiving one, purchase materials relying on advances from customers, production relying on carrying bricks + contractors, win customers by " lower than others" argument. Kitchen cabinet is a collection of customized products, it is necessary to meet the different needs of customers, but also produce in accordance with the bulk of industrialization, standardization, such a systemic complex product requires board cutting, drilling, edge banding and assembly must have panel furniture production line.

Precautions: First, you should carefully the kitchen cabinet manufacturer inquire whether it has factory, where is the factory? What equipment? Whether can visit the factory? Secondly, pay attention to see the plate edge and fine edge, see whether the product sheet is edge-sealing, small workshops usually just seal the visible surface, this will lead to the plate easy to absorb moisture and expand in a humid kitchen; Thirdly, see wall cabinet side panels drilling process, including whether the hinge mounting holes are not accurate, and the emergence of porous phenomenon.

2. Note that the fake foreign brand recognition --- fake foreign brands or local goods European cabinet design philosophy guides the trend of world cabinet, so many manufacturers use the foreign name, using cover-up publicity and marketing to trumpet cabinets as Germany, Italy or from international brand, but in fact are authentic local goods and local products, has nothing to do with the quality of best kitchen cabinet brands from Germany, Italy and the advanced countries; it is the marketing tool purely playing with the concept.

Precautions: User should take a closer look at the quality assurance and origin at the time of purchase, not to spend time and money because they are crowned as luxuries in the Western name.

3. Note to plate true and false identification --- emphasis on the plate real brand and sources
The kitchen is closely related to people's eating habits, which has higher requirements for the plate. Formal manufacturers will adopt brand materials, which have passed by the certificate authority environmental testing and provide brand material certificate. Many cabinet brands engrave their own cabinet brand as security signs on the plate, which often distract your attention on real plates brand and source, and is most likely to be shoddy; consumers must not forget to ask and view the proof in the purchase.

Precautions: Pay attention to obtain a copy of the proof of written materials, to inquire into the real material brand, it is best to call the material supplier, to determine the authenticity of the selected cabinet timber.

www.chinakitchencabinets.net is the leading manufacturer and wholesaler in China, offering kitchen cabinets, wardrobe, bathroom products, kitchen appliance, kitchen accessories, home furniture, and commercial kitchen equipment worldwide. OPPEIN is famous for custom kitchen cabinets and online service.

related post

Notes for Buying Common Kitchen Appliances Cn the face of so many kitchen appliances styles from many brands on the market, how we should choose the most kitchen appliances suitable for ourselves? If you don’t understand the knowledge about home kitchen appliances, then you may take or even waste a long time for selection. Therefore, acquire a certain amount of expertise is necessary for you to buy kitchen appliances.......

Kitchen Cabinets Design

Kitchen cabinets can not only be use to store the kitchenware, but also be used to decorate the kitchen. Kitchen cabinet is the place where tableware is stored, so the kitchen looks clean and neat even though you have a large number of kitchenware. Kitchen cabinets design plays an important role for your house decoration. You can have different feelings after you see kitchens with different cabinets. It is similar to the different feelings after you see houses with different style furniture. Well-designed kitchen cabinet will draw attention to your cooking to eager for the meals. It will be very interesting and you will cook more often. You should consider your needs and make sure the kitchen cabinets do not decrease the space of your kitchen. You can consider the form of a kitchen with U shape kitchen design.

You can think about the colorful kitchen cabinets. Most modern kitchens use a little color variation as the kitchen cabinets often have the similar colors. If you have difficulty choosing the color of kitchen cabinet, you can ask for help designers to choose the right color as you wish or you can consider to choosing your own color with the help of the best kitchen cabinet brands. Red and white, black and silver, black and gray are the colors that attractive. You can choose the natural color if the kitchen cabinets are made of wood or maple.

Kitchen cabinets are also influenced by the shape of your kitchen. You can design your kitchen cabinets according to the space of your kitchen. It is not good to leave too much space or too little in your kitchen. It depends on your taste and you can get more ideas from some websites of kitchen cabinets. Modern kitchen with U shape kitchen design is very popular at present. You can try some special ideas to make your kitchen different.

Different materials can make a great difference for kitchen cabinets. Maple-like material, solid wood, or of ordinary materials with a layer of wood can be used in modern kitchen. Good kitchen cabinets design can make your kitchen special and you will love the kitchen.

www.chinakitchencabinets.net is the leading manufacturer and wholesaler in China, offering kitchen cabinets, wardrobe, bathroom products, kitchen appliance, kitchen accessories, home furniture, and commercial kitchen equipment worldwide. OPPEIN is famous for custom kitchen cabinetsand online service. Its other kitchen products are also recognized as customers' best choice for their integrated kitchen design.

related post

Kitchen Cabinet Quality Does Not Depend on Price

Currently, solid wood kitchen cabinets on the market are available for a variety of materials, such as rosewood, cherry, oak, teak, etc. Price per square meter ranges from 100 RMB to 1,000 RMB, among which the majority are between 200 RMB and 400 RMB per square meter. The best kitchen cabinet brands on the market are merbau (commonly known as Merbau) cabinet, fiber skin, pometia, black ants wood cabinets, the slightly upscale teak and Balsamo cabinets, two cabinets price is about 600 RMB per square meter, or even higher......

Choose Correct Baby Wet Wipes

Simply because the wet wipes made by wet wipes producers bring convenience coupled with excellent cleaning effect to people, Dry Wipes became rather popular with individuals, specifically young mothers. These young mothers usually use wet wipes to wipe the babies’ skin. Wet wipes can clean not only the hands, but also the modest ass of the baby.

For the duration of the whole process of cleaning the ass for the babies, making use of wet wipes supplied from the wet wipes manufacturers are convenient. Due to the fact the babies defecation coupled with Color Coded Wipes are far more, ass demands to be wiped a lot of occasions. Employing the general tissue may bring harm for the baby’s skin. Simply because the baby’s skin is quite delicate and then general tissue is rather dry not to mention rough, the common may harm the baby’s skin. Even some general can include the harm chemical materials; this can lead to the red swollen relating to the skin. For that reason, employing hygiene hand wet wipes to wipe the ass associated with the child is really a great option; although employing expert baby wet wipes certainly are a better decision.

Child wet wipes can clean the skin much better, and it is extremely soft plus has no stimulation for the baby’s delicate skin. Eye Treatment Mask components can never ever include the harm chemical materials.Baby Wet Wipes has several types, throughout the process of choosing the kind and then making use of the wet wipes, you ought to be pay attention to the following points.
First of all, noticing the child wet wipes ingredients: ingredients are critical for the high quality related with wet wipes. In order to accomplish antibacterial moist impact, various forms of baby wet wipes have diverse ingredients. Some ingredients can harm the baby’s skin. For this reason young parents can never ever ignore the point in the course of the entire process of acquiring. Baby wet wipes can in no way be added alcohol, fragrance, stimulation supplies plus fluorescent agent. Secondly, spend consideration for the seal situation: within the wet wipes wholesale market, you will find various forms of child wet wipes. When young mothers select the babies wet wipes, you should be careful about the seal connected with the packaging. If packaging has a excellent sealing potential, the wet wipes will features a far better disinfection impact. Thirdly, in the course of the entire process of utilizing wet wipes, then you’ve got to not use them to wipe the baby’s face, mouth toys. As a result, the skin about the face is different from the skin for the physique. Simply because the child frequently bites the toys the wet wipes contain numerous ingredients which are not suitable for the child to bite, the toys cannot be wiped from the Needle Punched Nonwoven.

In brief, once you choose the child wet wipes and use them, you’ve got to be careful.
www.hknbc.com is specialized in OEM & ODM services. It mainly produces nonwoven fabric and its downstream products, wet wipes(adult wet wipes, feminine wet wipes, baby wet wipes, household wet wipes, etc.), cosmetics, and anti-bacterial products. There are four main categories: wet tissue line; facial mask; anti-bacterial products; skin care products.More article come from:http://homeproduct123.bravesites.com/

Disposable Wet Tissue

What should you know about disposable wet tissue? I had reviewed many brands of disposable wet tissue, and so what should you know – the fact?

Wet tissue, in general, comes into 2 categories:
(1) First, the formula contains only cleansing agents just to clean the grease on your cleaning subject; and (2) Second, the formula contains only preservative for “disinfecting” the cleaning subject.
In actual fact, the most ideal formula for a wet wipe should contain formula for cleaning the grease and disinfecting the cleaning subject. I guess due to the buying pressure and competition, many brands simply could not afford to contain both functions in their packing. However, that doesn’t mean there are no brands that contain both. Indeed, so far, I notice some brands that proudly hold the faith of both!

Most importantly, I want to bring to your attention is about the “disinfecting range” of the wet tissues. In most formulas that I had seen, they use only preservative as the disinfecting agents. Do they really disinfect your cleaning subjects? Not really…. I hope the answer does not surprise you!

What these preservative really does in the packing is to keep the material from further infection/contamination, if any. What you are cleaning on the subject is only a really clean facial cleansing wipes (clean as in clean as per last standard during packing). They don’t really “disinfect” your subjects; they only act as a clean wet tissue, with liquid content, to wet your subject, hopefully to remove some grease off it.

Wet cleaning wipes are convenient at home, in the car, and just about anywhere else the occasional spill or mess may happen. To really disinfect your cleaning subject, ensure you are really using disinfecting formula that does the jobs. Wet tissue, in general, is equivalent to a clean wet tissue with preservative!

www.hknbc.com is specialized in OEM & ODM services. It mainly produces nonwoven fabric and its downstream products, wet wipes(adult wet wipes, feminine wet wipes, baby wet wipes, household wet wipes, etc.), cosmetics, and anti-bacterial products. There are four main categories: wet tissue line; facial mask; anti-bacterial products; skin care products. More article come from:http://homeproduct123.bravesites.com/

stainless steel balustrades,slotted handrail tube

Color rendering index in the LED
Lighting sources have very strict standards of color rendering index and light source stability, and there is still a large gap in this point for the LED. The color consistency of lighting is also very important, while there are considerable difficulties for LED devices to meet the conformance requirements of this color.

Luminous performance of LED light
The main method to improve the LED luminous efficiency is to improve the structure and manufacturing process of the semiconductor light emitting material and the LED chip. So the manufacturers led tube lighting pays much more attention to this aspect.

High-power issue of LED lights

As an ordinary illumination, the light flux of the individual LED outputs must be sufficiently large. In order to achieve the needs of the luminous flux, low-power LED lighting must concentrate multiple LED to meet the design requirements, the disadvantage is the complex circuit, poor heat dissipation, inconsistent color rendering index. In contrast, the monomer of high-power LED power is much greater than the sum of a number of small power LED, allowing larger operating current, and power supply lines is relatively simple, perfect heat dissipation structure, color rendering index consistent, longer life, so the high-power LED devices will replace the small power LED devices. Currently, the focus of competition of the world's semiconductor lighting technology and industrialization concentrated is in the blue, purple, white, and high-power high-brightness chip. High-power chip production equipment abroad is still in the developing phase, and large power dissipation, the large amount of heat, high light efficiency put forward a new and higher requirement for the packaging process, the equipment and materials.

Heat issue of the LED light

If the LED junction temperature exceeds the standard limit value, it will results in the unrecoverable light intensity attenuation. High power LED will generate a lot of heat in the work, and if it will not effectively solve the problem of heat dissipation, then the performance of led tube lamp will be reduced and the service life will be shorten, and therefore it is essential to effectively solve the heat problem. Obviously, besides the required a large area outside the chip in the design of the larger of the input power LED device and lamps, but also a good heat dissipation structure will be equipped with.
Design issues in the optical system
Since the light normally emitted from the LED is relatively concentrated in a small solid angle range, and the reflector in the general lighting is no longer the necessary optical component, and optical lens are often used as a collimating assembly, and then pincushion lenses, wedge, prism make the re-diffusion of the beam deflection, resulting in the light distribution to meet the standard requirements of the various lights. So the unique secondary optical system design is required on the LED lights.

www.ervan.cn is a professional LED tube manufacturer located in Shenzhen, China. ERVAN is our trade mark. Our Company was founded in 2002 and started Researching and Developing LED tubes since 2005. Now, our tubes are upgraded to the top level in the world, and we are one of the top 10 LED Tube manufacturers. We set up on the firm belief of offering the high quality, unique design and fully warranted LED tubes to our customer at the most competitive price.

Kitchen Cabinet Quality Does Not Depend on Price

Solid wood kitchen cabinets prices climb higher and higher

Currently, solid wood kitchen cabinets on the market are available for a variety of materials, such as rosewood, cherry, oak, teak, etc. Price per square meter ranges from 100 RMB to 1,000 RMB, among which the majority are between 200 RMB and 400 RMB per square meter. The best kitchen cabinet brands on the market are merbau (commonly known as Merbau) cabinet, fiber skin, pometia, black ants wood cabinets, the slightly upscale teak and Balsamo cabinets, two cabinets price is about 600 RMB per square meter, or even higher. Raw materials of solid wood kitchen cabinets in the Chinese market almost entirely come from abroad, such as Merbau is from Southeast Asia; natural teak is from Myanmar, Thailand, and Thailand has banned the felling of teak; the global yield little Balsamo is from Brazil; oak wood is from Russia; the Okan is produced in Africa ...... Because the rare raw materials are rare, solid wood kitchen cabinets prices climb higher and higher.

Suggestions for kitchen cabinet manufacturing enterprises
With the prices of labor and raw material prices rise, product costs increase, it is inevitable to lead to price of the cabinet products to rise. Any development of the industry and mature will enter the era of little profit, like home manufacturers, dealers, they cannot have been in a level of high profits, home industry profits era has passed. With the survival of the fittest in the market, the prices of some products will rise and some products will lower prices. The industry believes that once the cabinet kitchen industry steps into the low profit period, kitchen cabinet manufacturer should make full use of raw materials, reduce inventory, give full play to the artificial effectiveness, and optimize procurement and sales.

The price of solid wood kitchen cabinets is mainly determined by the scarcity of wood
There are so many timber materials in the market, whether the more expensive the price is, the better the material of the timber, the more good quality cabinets? Experts believe that though the price of solid wood kitchen cabinets is related to wood material, but is mainly determined by the scarcity of wood, such as teak growth cycle is over a century; the Balsamo yield very little in the world, and difficult for processing, so it is even more their valuable. Many people who choose teak or the Balsamo cabinets only consider from the appearance, it looks more tasteful, but actually the quality is not very different from the slightly cheaper wood cabinets.

Important factors that affect the solid wood cabinets quality
In addition to the wood species, processing, pavement quality and the use environment are important factors that affect the solid wood cabinets quality. The valuable timber represents good species performance, does not mean that the kitchen cabinet made of it is certainly easy to use. The so-called luxury is pretty pattern, good-looking texture, loved by everyone; then less quantity or long growth cycle. Even if it is the same kind of wood, different companies have different processes, the kitchen cabinet quality is different due to different processing.

More infromation come from:http://betterhomeproducts.jigsy.com/